The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Open accessAbstract
The ability to bioengineer three-dimensional (3D) tissues is a potentially powerful approach to treat diverse diseases such as cancer, loss of tissue function, or organ failure. Traditional tissue engineering methods, however, face challenges in fabricating 3D tissue constructs that resemble the native tissue microvasculature and microarchitectures. We have developed a bioprinter that can be used to print 3D patches of smooth muscle cells (5 mm x 5 mm x 81 microm) encapsulated within collagen. Current inkjet printing systems suffer from loss of cell viability and clogging. To overcome these limitations, we developed a system that uses mechanical valves to print high viscosity hydrogel precursors containing cells. The bioprinting platform that we developed enables (i) printing of multilayered 3D cell-laden hydrogel structures (16.2 microm thick per layer) with controlled spatial resolution (proximal axis: 18.0 +/- 7.0 microm and distal axis: 0.5 +/- 4.9 microm), (ii) high-throughput droplet generation (1 s per layer, 160 droplets/s), (iii) cell seeding uniformity (26 +/- 2 cells/mm(2) at 1 million cells/mL, 122 +/- 20 cells/mm(2) at 5 million cells/mL, and 216 +/- 38 cells/mm(2) at 10 million cells/mL), and (iv) long-term viability in culture (>90%, 14 days). This platform to print 3D tissue constructs may be beneficial for regenerative medicine applications by enabling the fabrication of printed replacement tissues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
RETRACTED: Clinical transplantation of a tissue-engineered airway
Macchiarini, P., Jungebluth, P., Go, T., Asnaghi, M. A., Rees, L. E., Cogan, T. A., Dodson, A., Martorell, J., Bellini, S., Parnigotto, P. P., et al. (2008) · The Lancet · doi:10.1016/s0140-6736(08)61598-6 · Cited by 1,433
RetractedLanger, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
A high-mobility electron-transporting polymer for printed transistors
Yan, H., Chen, Z., Zheng, Y., Newman, C., Quinn, J. R., Dötz, F., Kastler, M., & Facchetti, A. (2009) · Nature · doi:10.1038/nature07727 · Cited by 3,009
Tissue-engineered autologous bladders for patients needing cystoplasty
Atala, A., Bauer, S. B., Soker, S., Yoo, J. J., & Retik, A. B. (2006) · The Lancet · doi:10.1016/s0140-6736(06)68438-9 · Cited by 1,833
Microscale technologies for tissue engineering and biology
Khademhosseini, A., Langer, R., Borenstein, J., & Vacanti, J. P. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0507681102 · Cited by 1,558
Self-citationThe role of bioreactors in tissue engineering
Martin, I., Wendt, D., & Heberer, M. (2004) · Trends in Biotechnology · doi:10.1016/j.tibtech.2003.12.001 · Cited by 1,215
Engineering Hydrogels as Extracellular Matrix Mimics
Geckil, H., Xu, F., Zhang, X., Moon, S., & Demirci, U. (2010) · Nanomedicine · doi:10.2217/nnm.10.12 · Cited by 944
Self-citationApplication of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Lee, W., Debasitis, J. C., Lee, V. K., Lee, J.-H., Fischer, K., Edminster, K., Park, J.-K., & Yoo, S.-S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.009 · Cited by 578
Biocompatible Inkjet Printing Technique for Designed Seeding of Individual Living Cells
Nakamura, M., Kobayashi, A., Takagi, F., Watanabe, A., Hiruma, Y., Ohuchi, K., Iwasaki, Y., Horie, M., Morita, I., & Takatani, S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1658 · Cited by 538
Viability and electrophysiology of neural cell structures generated by the inkjet printing method
Xu, T., Gregory, C. A., Molnar, P., Cui, X., Jalota, S., Bhaduri, S. B., & Boland, T. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.048 · Cited by 520
Sikavitsas, V. I., Bancroft, G. N., Holtorf, H. L., Jansen, J. A., & Mikos, A. G. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2434367100 · Cited by 472
Biological Laser Printing: A Novel Technique for Creating Heterogeneous 3-dimensional Cell Patterns
Barron, J. A., Wu, P., Ladouceur, H. D., & Ringeisen, B. R. (2004) · Biomedical Microdevices · doi:10.1023/b:bmmd.0000031751.67267.9f · Cited by 435
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
A cell-laden microfluidic hydrogel
Ling, Y., Rubin, J., Deng, Y., Huang, C., Demirci, U., Karp, J. M., & Khademhosseini, A. (2007) · Lab on a Chip · doi:10.1039/b615486g · Cited by 395
Self-citationHepatocyte behavior within three-dimensional porous alginate scaffolds
Glicklis, R., Shapiro, L., Agbaria, R., Merchuk, J. C., & Cohen, S. (2000) · Biotechnology and Bioengineering · doi:10.1002/(sici)1097-0290(20000205)67:3<344::aid-bit11>3.0.co;2-2 · Cited by 391
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Generation of Three-Dimensional Hepatocyte/Gelatin Structures with Rapid Prototyping System
Wang, X., Yan, Y., Pan, Y., Xiong, Z., Liu, H., Cheng, J., Liu, F., Lin, F., Wu, R., Zhang, R., et al. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.83 · Cited by 353
Organ printing: from bioprinter to organ biofabrication line
Mironov, V., Kasyanov, V., & Markwald, R. R. (2011) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2011.02.006 · Cited by 343
Xu, F., Celli, J., Rizvi, I., Moon, S., Hasan, T., & Demirci, U. (2011) · Biotechnology Journal · doi:10.1002/biot.201000340 · Cited by 337
Self-citationSingle cell epitaxy by acoustic picolitre droplets
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b704965j · Cited by 326
Self-citationNishiyama, Y., Nakamura, M., Henmi, C., Yamaguchi, K., Mochizuki, S., Nakagawa, H., & Takiura, K. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3002759 · Cited by 322
Laser Printing of Pluripotent Embryonal Carcinoma Cells
Ringeisen, B. R., Kim, H., Barron, J. A., Krizman, D. B., Chrisey, D. B., Jackman, S., Auyeung, R. Y. C., & Spargo, B. J. (2004) · Tissue Engineering · doi:10.1089/107632704323061843 · Cited by 295
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
Three‐Dimensional Magnetic Assembly of Microscale Hydrogels
Xu, F., Wu, C. M., Rengarajan, V., Finley, T. D., Keles, H. O., Sung, Y., Li, B., Gurkan, U. A., & Demirci, U. (2011) · Advanced Materials · doi:10.1002/adma.201101962 · Cited by 251
Self-citationJet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Controlled Positioning of Cells in Biomaterials—Approaches Towards 3D Tissue Printing
Wüst, S., Müller, R., & Hofmann, S. (2011) · Journal of Functional Biomaterials · doi:10.3390/jfb2030119 · Cited by 231
Calvert, P. (2007) · Science · doi:10.1126/science.1144212 · Cited by 224
Direct Cell Writing of 3D Microorgan for In Vitro Pharmacokinetic Model
Chang, R., Nam, J., & Sun, W. (2008) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2007.0392 · Cited by 203
Microfluidic hydrogels for tissue engineering
Huang, G. Y., Zhou, L. H., Zhang, Q. C., Chen, Y. M., Sun, W., Xu, F., & Lu, T. J. (2011) · Biofabrication · doi:10.1088/1758-5082/3/1/012001 · Cited by 199
Self-citationNerem, R. M. (1991) · Annals of Biomedical Engineering · doi:10.1007/bf02367396 · Cited by 175
Patterning hydrogels in three dimensions towards controlling cellular interactions
Khetan, S., & Burdick, J. A. (2011) · Soft Matter · doi:10.1039/c0sm00852d · Cited by 173
The assembly of cell-encapsulating microscale hydrogels using acoustic waves
Xu, F., Finley, T. D., Turkaydin, M., Sung, Y., Gurkan, U. A., Yavuz, A. S., Guldiken, R., & Demirci, U. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.07.010 · Cited by 151
Self-citationImpact of a compound droplet on a flat surface: A model for single cell epitaxy
Taşoğlu, S., Kaynak, G., Szeri, A. J., Demirci, U., & Muradoğlu, M. (2010) · Physics of Fluids · doi:10.1063/1.3475527 · Cited by 123
Self-citationCell encapsulating droplet vitrification
Demirci, U., & Montesano, G. (2007) · Lab on a Chip · doi:10.1039/b705809h · Cited by 118
Self-citationLayer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
Effects of surfactant and gentle agitation on inkjet dispensing of living cells
Parsa, S., Gupta, M., Loizeau, F., & Cheung, K. C. (2010) · Biofabrication · doi:10.1088/1758-5082/2/2/025003 · Cited by 105
Microengineering methods for cell-based microarrays and high-throughput drug-screening applications
Xu, F., Wu, J., Wang, S., Durmus, N. G., Gurkan, U. A., & Demirci, U. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034101 · Cited by 99
Self-citationAcoustic Picoliter Droplets for Emerging Applications in Semiconductor Industry and Biotechnology
Demirci, U. (2006) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2006.878879 · Cited by 96
Self-citationNishiyama, Y., Henmi, C., Iwanaga, S., Nakagawa, H., Yamaguchi, K., Akita, K., Mochizuki, S., Takiura, K., & Nakamura, M. (2008) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.(2008)52:6(060201 · Cited by 94
Embryonic stem cell bioprinting for uniform and controlled size embryoid body formation
Xu, F., Sridharan, B., Wang, S., Gurkan, U. A., Syverud, B. C., & Demirci, U. (2011) · Biomicrofluidics · doi:10.1063/1.3580752 · Cited by 93
Self-citationDROP-ON-DEMAND INKJET BIOPRINTING: A PRIMER
Binder, K. W., ALLEN, A. J., Yoo, J. J., & Atala, A. (2011) · Gene Therapy and Regulation · doi:10.1142/s1568558611000258 · Cited by 69
Xu, F., Beyazoglu, T., Hefner, E., Gurkan, U. A., & Demirci, U. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0038 · Cited by 55
Self-citationJambovane, S. R., Kim, D. J., Duin, E. C., Kim, S., & Hong, J. W. (2011) · Analytical Chemistry · doi:10.1021/ac103217p · Cited by 49
Self-citationMicroprinted feeder cells guide embryonic stem cell fate
Tavana, H., Mosadegh, B., Zamankhan, P., Grotberg, J. B., & Takayama, S. (2011) · Biotechnology and Bioengineering · doi:10.1002/bit.23190 · Cited by 45
Liberski, A. R., Delaney, J. T., Schäfer, H., Perelaer, J., & Schubert, U. S. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100086 · Cited by 33
Effect of Sustained Tension on Bladder Smooth Muscle Cells in Three-Dimensional Culture
Roby, T., Olsen, S., & Nagatomi, J. (2008) · Annals of Biomedical Engineering · doi:10.1007/s10439-008-9545-5 · Cited by 30
Self-citation
Cited by
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Self-citationA review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Metadata
- Authors
- Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., Khademhosseini, A., & Demirci, U.
- Venue
- Tissue Engineering Part C: Methods
- Publisher
- SAGE Publications
- Published
- 2010-02
- Volume
- 16
- Issue
- 1
- Pages
- 157-166
- ISSN
- 1937-3384 (ISSN-L)
- 1937-3392
- OpenAlex
- W2023913887
- Cited by
- 305
- References
- 48
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.