The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma
Abstract
STUDY DESIGN: Case report. OBJECTIVE: To describe a three-dimensional (3D) printed axial vertebral body used in upper cervical spine reconstruction after a C2 Ewing sarcoma resection in an adolescent boy. SUMMARY OF BACKGROUND DATA: Ewing sarcoma is a malignant musculoskeletal neoplasm with a peak incidence in adolescents. Cervical spine as the primary site of the tumor has been related to a worse prognosis. Tumor resection is particularly challenging in the atlantoaxial region due to complexity of the anatomy, necessity for extensive resection according to oncological principles, and a lack of specialized implants for reconstruction. 3D printing refers to a process where 3D objects are created through successive layering of material under computer control. Although this technology potentially enables accurate fabrication of patient-specific orthopedic implants, literature on its utilization in this regard is rare. METHODS: A 12-year-old boy with a C2 Ewing sarcoma underwent a staged spondylectomy. Wide resection of the posterior elements was first performed. Two weeks later, a high anterior retropharyngeal approach was taken to remove the remains of the C2 vertebra. A customized artificial vertebral body fabricated according to a computer model using titanium alloy powder was inserted to replace the defect between C1 and C3. The microstructure of the implant was optimized for better biomechanical stability and enhanced bone healing. RESULTS: Patient had an uneventful recovery and began to ambulate on postoperative day 7. Adjuvant treatment commenced 3 weeks after the surgery. He was tumor-free at the 1-year follow-up. Computed tomography studies revealed evidence of implant osseointegration and no subsidence or displacement of the construct. CONCLUSION: This is a case example on the concept of personalized precision medicine in a surgical setting and demonstrates how 3D-printed, patient-specific implants may bring individualized solutions to rare problems wherein restoration of the specific anatomy of each patient is a key prognostic factor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fourney, D. R., Frangou, E. M., Ryken, T. C., DiPaola, C. P., Shaffrey, C. I., Berven, S. H., Bilsky, M. H., Harrop, J. S., Fehlings, M. G., Boriani, S., et al. (2011) · Journal of Clinical Oncology · doi:10.1200/jco.2010.34.3897 · Cited by 551
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
Localized Ewing Tumor of Bone: Final Results of the Cooperative Ewing’s Sarcoma Study CESS 86
Paulussen, M., Ahrens, S., Dunst, J., Winkelmann, W., Exner, G. U., Kotz, R., Amann, G., Dockhorn-Dworniczak, B., Harms, D., Müller-Weihrich, S., et al. (2001) · Journal of Clinical Oncology · doi:10.1200/jco.2001.19.6.1818 · Cited by 445
Hukuda, S., Mochizuki, T., Ogata, M., Shichikawa, K., & Shimomura, Y. (1985) · The Journal of Bone and Joint Surgery. British volume · doi:10.1302/0301-620x.67b4.4030860 · Cited by 221
Effect of porosity on the fluid flow characteristics and mechanical properties of tantalum scaffolds
Shimko, D. A., Shimko, V. F., Sander, E. A., Dickson, K. F., & Nauman, E. A. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30229 · Cited by 215
A novel porous Ti6Al4V: Characterization and cell attachment
Li, J. P., Li, S. H., van Blitterswijk, C., & de Groot, K. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30278 · Cited by 149
Palmquist, A., Snis, A., Emanuelsson, L., Browne, M., & Thomsen, P. (2011) · Journal of Biomaterials Applications · doi:10.1177/0731684411431857 · Cited by 144
Challenges of Local Recurrence and Cure in Low Grade Malignant Tumors of the Spine
Boriani, S., Saravanja, D. D., Yamada, Y. J., Varga, P. P., Biagini, R., & Fisher, C. G. (2009) · Spine · doi:10.1097/brs.0b013e3181b969ac · Cited by 129
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Cardiac 3D Printing and its Future Directions
Vukicevic, M., Mosadegh, B., Min, J. K., & Little, S. H. (2017) · JACC: Cardiovascular Imaging · doi:10.1016/j.jcmg.2016.12.001 · Cited by 535
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Hoang, D., Perrault, D., Stevanovic, M., & Ghiassi, A. (2016) · Annals of Translational Medicine · doi:10.21037/atm.2016.12.18 · Cited by 317
Metadata
- Authors
- Xu, N., Wei, F., Liu, X., Jiang, L., Cai, H., Li, Z., Yu, M., Wu, F., & Liu, Z.
- Venue
- SPINE
- Published
- 2016-01
- Volume
- 41
- Issue
- 1
- Pages
- E50-E54
- ISSN
- 0362-2436 (ISSN-L)
- OpenAlex
- W2147445004
- Cited by
- 291
- References
- 8
- FWCI
- 19.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma. https://app.cochat.ai/papers/10.1097/brs.0000000000001179
- The paper
- Xu, N., Wei, F., Liu, X., Jiang, L., Cai, H., Li, Z., Yu, M., Wu, F., & Liu, Z. (2016). Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma. SPINE. https://doi.org/10.1097/brs.0000000000001179
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.