The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
The hierarchical structure and mechanics of plant materials
Open accessAbstract
The cell walls in plants are made up of just four basic building blocks: cellulose (the main structural fibre of the plant kingdom) hemicellulose, lignin and pectin. Although the microstructure of plant cell walls varies in different types of plants, broadly speaking, cellulose fibres reinforce a matrix of hemicellulose and either pectin or lignin. The cellular structure of plants varies too, from the largely honeycomb-like cells of wood to the closed-cell, liquid-filled foam-like parenchyma cells of apples and potatoes and to composites of these two cellular structures, as in arborescent palm stems. The arrangement of the four basic building blocks in plant cell walls and the variations in cellular structure give rise to a remarkably wide range of mechanical properties: Young's modulus varies from 0.3 MPa in parenchyma to 30 GPa in the densest palm, while the compressive strength varies from 0.3 MPa in parenchyma to over 300 MPa in dense palm. The moduli and compressive strength of plant materials span this entire range. This study reviews the composition and microstructure of the cell wall as well as the cellular structure in three plant materials (wood, parenchyma and arborescent palm stems) to explain the wide range in mechanical properties in plants as well as their remarkable mechanical efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citationCellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Self-citationBoerjan, W., Ralph, J., & Baucher, M. (2003) · Annual Review of Plant Biology · doi:10.1146/annurev.arplant.54.031902.134938 · Cited by 4,504
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Wood handbook: wood as an engineering material
Ross, R. J., & USDA Forest Service., F. P. L. (2010) · doi:10.2737/fpl-gtr-190 · Cited by 2,510
Pectins: structure, biosynthesis, and oligogalacturonide-related signaling
Ridley, B. L., O'Neill, M. A., & Mohnen, D. (2001) · Phytochemistry · doi:10.1016/s0031-9422(01)00113-3 · Cited by 1,912
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
Mechanical Design in Organisms
Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv143mdjg · Cited by 1,263
Wood handbook : wood as an engineering material.
Laboratory, F. P. (1999) · doi:10.2737/fpl-gtr-113 · Cited by 987
Mechanical Design in Organisms
Cromroy, H. L., Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (1976) · The Florida Entomologist · doi:10.2307/3494271 · Cited by 899
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Nanostructure of cellulose microfibrils in spruce wood
Fernandes, A. N., Thomas, L. H., Altaner, C. M., Callow, P., Forsyth, V. T., Apperley, D. C., Kennedy, C. J., & Jarvis, M. C. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1108942108 · Cited by 737
Materials Selection for Mechanical Design
Cebon, D., & Ashby, M. (1992) · Computerization and Networking of Materials Databases: Third Volume · doi:10.1520/stp23757s · Cited by 615
Comparative biomechanics: life's physical world
(2004) · Choice Reviews Online · doi:10.5860/choice.41-4040 · Cited by 599
Primary cell wall metabolism: tracking the careers of wall polymers in living plant cells
Fry, S. C. (2004) · New Phytologist · doi:10.1111/j.1469-8137.2004.00980.x · Cited by 504
Cellular Materials in Nature and Medicine
Gibson, L. J., Ashby, M. F., & Harley, B. A. C. (2010) · Cited by 490
Self-citationTashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Timber, its nature and behaviour
Dinwoodie, J. M. (1981) · Thammasat University Digital Collections · Cited by 467
Ebringerová, A., Hromádková, Z., & Heinze, T. (2005) · Advances in Polymer Science · doi:10.1007/b136816 · Cited by 451
(1961) · Chemical & Engineering News Archive · doi:10.1021/cen-v039n005b.p036 · Cited by 434
Cell wall properties and their effects on the mechanical properties of fibers
Bergander, A., & Salmén, L. (2002) · Journal of Materials Science · doi:10.1023/a:1013115925679 · Cited by 299
Elastic moduli of the crystal lattices of polymers
Satcurada, I., Ito, T., & Nakamae, K. (1967) · Journal of Polymer Science Part C Polymer Symposia · doi:10.1002/polc.5070150107 · Cited by 283
Young's modulus of hemicellulose as related to moisture content
Cousins, W. J. (1978) · Wood Science and Technology · doi:10.1007/bf00372862 · Cited by 270
The anisotropic elasticity of the plant cell wall
Cave, I. D. (1968) · Wood Science and Technology · doi:10.1007/bf00350273 · Cited by 243
Hofstetter, K., Hellmich, C., & Eberhardsteiner, J. (2005) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2005.05.006 · Cited by 227
Torrents, A., Schaedler, T. A., Jacobsen, A. J., Carter, W. B., & Valdevit, L. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.03.007 · Cited by 212
On the mechanics of balsa and other woods
Easterling, K. E., Harrysson, R., Gibson, L. J., & Ashby, M. F. (1982) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1982.0118 · Cited by 200
Self-citationRHEOLOGY OF APPLE AND POTATO TISSUE AS AFFECTED BY CELL TURGOR PRESSURE
LIN, T., & PITT, R. E. (1986) · Journal of Texture Studies · doi:10.1111/j.1745-4603.1986.tb00554.x · Cited by 186
Sakurada, I., & Kaji, K. (1970) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070310108 · Cited by 180
Cross-sectional structure of the secondary wall of wood fibers as affected by processing
Fahlén, J., & Salmén, L. (2003) · Journal of Materials Science · doi:10.1023/a:1021174118468 · Cited by 167
The longitudinal Young's modulus of Pinus radiata
Cave, I. D. (1969) · Wood Science and Technology · doi:10.1007/bf00349983 · Cited by 156
Molecular Changes during Tensile Deformation of Single Wood Fibers Followed by Raman Microscopy
Gierlinger, N., Schwanninger, M., Reinecke, A., & Burgert, I. (2006) · Biomacromolecules · doi:10.1021/bm060236g · Cited by 156
A Survey of the Pectic Content of Nonlignified Monocot Cell Walls
Jarvis, M. C., Forsyth, W., & Duncan, H. J. (1988) · PLANT PHYSIOLOGY · doi:10.1104/pp.88.2.309 · Cited by 151
Prediction of elastic parameters for wood
Bodig, J., & Goodman, J. R. (1973) · Wood science · Cited by 138
Oey, M. L., Vanstreels, E., Baerdemaeker, J. D., Tijskens, E., Ramón, H., Hertog, M., & Nicolaï, B. M. (2007) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2006.12.015 · Cited by 102
Modelling of effects of ultrastructural morphology on the hygroelastic properties of wood fibres
Neagu, R. C., & Gamstedt, E. K. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1199-9 · Cited by 95
Structure and mechanics of the iris leaf
Gibson, L. J., Ashby, M. F., & Easterling, K. E. (1988) · Journal of Materials Science · doi:10.1007/bf00551271 · Cited by 92
Self-citationThe poroelastic role of water in cell walls of the hierarchical composite “softwood”
Bader, T. K., Hofstetter, K., Hellmich, C., & Eberhardsteiner, J. (2010) · Acta Mechanica · doi:10.1007/s00707-010-0368-8 · Cited by 61
A MICRO‐PENETRATION TECHNIQUE FOR MECHANICAL TESTING OF PLANT CELL WALLS
Hiller, S.-J., Bruce, D. M., & Jeronimidis, G. (1996) · Journal of Texture Studies · doi:10.1111/j.1745-4603.1996.tb00094.x · Cited by 59
Orthotropic Elastic Properties of Wood
Goodman, J. R., & Bodig, J. (1970) · Journal of the Structural Division · doi:10.1061/jsdeag.0002744 · Cited by 47
Yamamoto, H., Kojima, Y., Okuyama, T., Abasolo, W. P., & Gril, J. (2002) · Journal of Biomechanical Engineering · doi:10.1115/1.1485751 · Cited by 46
Hofstetter, K., Hellmich, C., Eberhardsteiner, J., & Mang, H. A. (2008) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376490802142387 · Cited by 45
Fracture in potato tuber parenchyma
Hiller, S.-J., & Jeronimidis, G. (1996) · Journal of Materials Science · doi:10.1007/bf00355984 · Cited by 42
Peura, M., Müller, M., Vainio, U., Sarén, M.-P., Saranpää, P., & Serimaa, R. E. (2007) · Trees · doi:10.1007/s00468-007-0168-5 · Cited by 41
Modelling of carrot tissue as a fluid-filled foam
Georget, D. M. R., Smith, A. C., & Waldron, K. W. (2003) · Journal of Materials Science · doi:10.1023/a:1023552430136 · Cited by 24
Cited by
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Structure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Metadata
- Authors
- Gibson, L. J.
- Venue
- Journal of The Royal Society Interface
- Publisher
- The Royal Society
- Published
- 2012-08-08
- Volume
- 9
- Issue
- 76
- Pages
- 2749-2766
- ISSN
- 1742-5662 (ISSN-L)
- 1742-5689
- OpenAlex
- W2144866800
- Cited by
- 1,215
- References
- 46
- FWCI
- 89.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.