The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
The hierarchical structure and mechanics of plant materials
Open accessAbstract
The cell walls in plants are made up of just four basic building blocks: cellulose (the main structural fibre of the plant kingdom) hemicellulose, lignin and pectin. Although the microstructure of plant cell walls varies in different types of plants, broadly speaking, cellulose fibres reinforce a matrix of hemicellulose and either pectin or lignin. The cellular structure of plants varies too, from the largely honeycomb-like cells of wood to the closed-cell, liquid-filled foam-like parenchyma cells of apples and potatoes and to composites of these two cellular structures, as in arborescent palm stems. The arrangement of the four basic building blocks in plant cell walls and the variations in cellular structure give rise to a remarkably wide range of mechanical properties: Young's modulus varies from 0.3 MPa in parenchyma to 30 GPa in the densest palm, while the compressive strength varies from 0.3 MPa in parenchyma to over 300 MPa in dense palm. The moduli and compressive strength of plant materials span this entire range. This study reviews the composition and microstructure of the cell wall as well as the cellular structure in three plant materials (wood, parenchyma and arborescent palm stems) to explain the wide range in mechanical properties in plants as well as their remarkable mechanical efficiency.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citationCellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Self-citationBoerjan, W., Ralph, J., & Baucher, M. (2003) · Annual Review of Plant Biology · doi:10.1146/annurev.arplant.54.031902.134938 · Cited by 4,504
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Wood handbook: wood as an engineering material
Ross, R. J., & USDA Forest Service., F. P. L. (2010) · doi:10.2737/fpl-gtr-190 · Cited by 2,510
Pectins: structure, biosynthesis, and oligogalacturonide-related signaling
Ridley, B. L., O'Neill, M. A., & Mohnen, D. (2001) · Phytochemistry · doi:10.1016/s0031-9422(01)00113-3 · Cited by 1,912
Mechanics of Wood and Wood Composites
Bodig, J., & Jayne, B. A. (1982) · Medical Entomology and Zoology · Cited by 1,473
Mechanical Design in Organisms
Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv143mdjg · Cited by 1,263
Wood handbook : wood as an engineering material.
Laboratory, F. P. (1999) · doi:10.2737/fpl-gtr-113 · Cited by 987
Cited by
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Structure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Klemm, D., Cranston, E. D., Fischer, D., Gama, M., Kedzior, S. A., Kralisch, D., Kramer, F., Kondo, T., Lindström, T., Nietzsche, S., et al. (2018) · Materials Today · doi:10.1016/j.mattod.2018.02.001 · Cited by 936
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Wang, J., Tavakoli, J., & Tang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.008 · Cited by 776
Structure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Highly Anisotropic, Highly Transparent Wood Composites
Zhu, M., Song, J., Li, T., Gong, A., Wang, Y., Dai, J., Yao, Y., Luo, W., Henderson, D., & Hu, L. (2016) · Advanced Materials · doi:10.1002/adma.201600427 · Cited by 744
Nanofibrils in nature and materials engineering
Ling, S., Kaplan, D. L., & Buehler, M. J. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.16 · Cited by 730
The cell biology of lignification in higher plants
Barros, J., Serk, H., Granlund, I., & Pesquet, E. (2015) · Annals of Botany · doi:10.1093/aob/mcv046 · Cited by 724
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Nazir, A., Abate, K. M., Kumar, A., & Jeng, J.-Y. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04085-3 · Cited by 528
Mittal, N., Ansari, F., Gowda.V, K., Brouzet, C., Chen, P., Larsson, P. T., Roth, S. V., Lundell, F., Wågberg, L., Kotov, N. A., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b01084 · Cited by 507
Rich Mesostructures Derived from Natural Woods for Solar Steam Generation
Jia, C., Li, Y., Yang, Z., Chen, G., Yao, Y., Jiang, F., Kuang, Y., Pastel, G., Xie, H., Yang, B., et al. (2017) · Joule · doi:10.1016/j.joule.2017.09.011 · Cited by 472
Cellulose Biomaterials for Tissue Engineering
Hickey, R. J., & Pelling, A. E. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00045 · Cited by 469
Biopolymer nanofibrils: Structure, modeling, preparation, and applications
Ling, S., Chen, W., Fan, Y., Zheng, K., Jin, K., Yu, H., Buehler, M. J., & Kaplan, D. L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.004 · Cited by 463
Freeze-Drying of Plant-Based Foods
Bhatta, S., Stevanovic Janezic, T., & Ratti, C. (2020) · Foods · doi:10.3390/foods9010087 · Cited by 427
Recent Advances in Bioplastics: Application and Biodegradation
Narancic, T., Cerrone, F., Beagan, N., & O’Connor, K. E. (2020) · Polymers · doi:10.3390/polym12040920 · Cited by 421
Chemistry and Specialty Industrial Applications of Lignocellulosic Biomass
Okolie, J. A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-020-01123-0 · Cited by 415
de Amorim, J. D. P., de Souza, K. C., Duarte, C. R., da Silva Duarte, I., de Assis Sales Ribeiro, F., Silva, G. S., de Farias, P. M. A., Stingl, A., Costa, A. F. S., Vinhas, G. M., et al. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-00989-9 · Cited by 383
Crossing kingdoms: Using decellularized plants as perfusable tissue engineering scaffolds
Gershlak, J. R., Hernandez, S., Fontana, G., Perreault, L. R., Hansen, K. J., Larson, S. A., Binder, B. Y. K., Dolivo, D. M., Yang, T., Dominko, T., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.02.011 · Cited by 375
Morphology and mechanics of fungal mycelium
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2017) · Scientific Reports · doi:10.1038/s41598-017-13295-2 · Cited by 361
Reciprocal Interactions between Cadmium-Induced Cell Wall Responses and Oxidative Stress in Plants
Loix, C., Huybrechts, M., Vangronsveld, J., Gielen, M., Keunen, E., & Cuypers, A. (2017) · Frontiers in Plant Science · doi:10.3389/fpls.2017.01867 · Cited by 359
Acetic Acid Bacteria in the Food Industry: Systematics, Characteristics and Applications
Department of Food Science and Technology, S. U. O. L., Gomes, R. J., Borges, M. D. F., Embrapa Tropical Agroindustry, C. 6.-1., Rosa, M. D. F., Embrapa Tropical Agroindustry, C. 6.-1., Castro-Gómez, R. J. H., Department of Food Science and Technology, S. U. O. L., Spinosa, W. A., & Department of Food Science and Technology, S. U. O. L. (2018) · Food Technology and Biotechnology · doi:10.17113/ftb.56.02.18.5593 · Cited by 355
Hydrothermal carbonization and Liquefaction: differences, progress, challenges, and opportunities
Lachos-Perez, D., César Torres-Mayanga, P., Abaide, E. R., Zabot, G. L., & De Castilhos, F. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126084 · Cited by 355
Zhou, Z., Liu, D., & Zhao, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111169 · Cited by 343
Scalable aesthetic transparent wood for energy efficient buildings
Mi, R., Chen, C., Keplinger, T., Pei, Y., He, S., Liu, D., Li, J., Dai, J., Hitz, E., Yang, B., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17513-w · Cited by 336
Alvira, D., Antorán, D., & Manyà, J. J. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.137468 · Cited by 309
Comprehensive review on nanocellulose: Recent developments, challenges and future prospects
Thomas, P., Duolikun, T., Rumjit, N. P., Moosavi, S., Lai, C. W., Bin Johan, M. R., & Fen, L. B. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2020.103884 · Cited by 304
Li, J., Zou, C., Xu, J., Ji, X., Niu, X., Yang, J., Huang, X., & Zhang, K.-Q. (2015) · Annual Review of Phytopathology · doi:10.1146/annurev-phyto-080614-120336 · Cited by 297
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Biocompatibility of Subcutaneously Implanted Plant-Derived Cellulose Biomaterials
Modulevsky, D. J., Cuerrier, C. M., & Pelling, A. E. (2016) · PLOS ONE · doi:10.1371/journal.pone.0157894 · Cited by 254
Hemp Fibre Properties and Processing Target Textile: A Review
Zimniewska, M. (2022) · Materials · doi:10.3390/ma15051901 · Cited by 214
Characterizing variability in lignocellulosic biomass: a review
Yan, J., Oyedeji, O., Leal, J. H., Donohoe, B. S., Semelsberger, T. A., Li, C., Hoover, A. N., Webb, E., Bose, E. A., Zeng, Y., et al. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06263 · Cited by 134
Cell wall microstructure, pore size distribution and absolute density of hemp shiv
Jiang, Y., Lawrence, M., Ansell, M. P., & Hussain, A. (2018) · Royal Society Open Science · doi:10.1098/rsos.171945 · Cited by 115
Ma, S., Jiang, Y., Fu, S., He, P., Sun, C., Duan, X., Jia, D., Colombo, P., & Zhou, Y. (2023) · Journal of Advanced Ceramics · doi:10.26599/jac.2023.9220700 · Cited by 88
Silk-Pectin Hydrogel with Superior Mechanical Properties, Biodegradability, and Biocompatibility
Numata, K., Yamazaki, S., Katashima, T., Chuah, J., Naga, N., & Sakai, T. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201300482 · Cited by 67
Khan, A., Ahmad, G., Haris, M., & Khan, A. A. (2023) · Gesunde Pflanzen · doi:10.1007/s10343-022-00679-2 · Cited by 45
CO2 removal using amine-functionalized kenaf in pressure swing adsorption system
Kamarudin, K. S. N., Zaini, N., & Khairuddin, N. E. A. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.12.040 · Cited by 31
Properties of mixed species/density cross laminated timber made of rubberwood and coconut wood
Srivaro, S., Lim, H., Li, M., & Pasztory, Z. (2022) · Structures · doi:10.1016/j.istruc.2022.04.016 · Cited by 26
González, O. M., García, A., Guachambala, M., & Navas, J. F. (2021) · Wood Material Science & Engineering · doi:10.1080/17480272.2020.1819871 · Cited by 13
Metadata
- Authors
- Gibson, L. J.
- Venue
- Journal of The Royal Society Interface
- Publisher
- The Royal Society
- Published
- 2012-08-08
- Volume
- 9
- Issue
- 76
- Pages
- 2749-2766
- ISSN
- 1742-5662 (ISSN-L)
- 1742-5689
- OpenAlex
- W2144866800
- Cited by
- 1,215
- References
- 46
- FWCI
- 89.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.