The lubrication of rollers III. A theoretical discussion of friction and the temperatures in the oil film
The DOI matches its Crossref record.
Abstract
Measurements of the thickness of the oil film have shown that the lubrication of loaded rollers is hydrodynamic in character. But hitherto the theories of this lubrication have been isothermal; frictional heating has been ignored. For the understanding of the frictional behaviour and also to define the physical conditions met by the oil in its passage through the conjunction of the disks a knowledge of the temperatures in the film is required. It is from the shearing of the oil in the film that the frictional heat arises. In this paper the dissipation of the heat by conduction through the oil to the surfaces of the disks and by transport with the oil (i.e. convection) are both considered. The temperatures in the film are assessed from the balance between the rates of generation and dissipation of heat. It is shown that in pure rolling the temperatures arising from friction are confined to the entry side ahead of the region of high pressure and that for the range of conditions considered the tem peratures are too low to influence thickness. With sliding it is shown that conduction is the important mechanism of dissipation and that the temperatures due to the sliding rise with pressure. On the entry side where the pressures are low, so are the temperatures. This explains the insensitivity of film thickness to sliding which has been demonstrated experimentally. Within the pressure zone high temperatures occur (e.g. a temperature rise of 200 deg C ). The distributions of temperature and viscosity have been found and also the velocity profiles of the oil. These show the cooler oil close to the surfaces of the disks to act almost as a rigid extension of the disks themselves; a situation akin to that postulated in boundary lubrication. From the viscosity distributions, expressions for the effective viscosity within the pressure zone (i.e. that constant viscosity which would give the same frictional traction) and for the frictional traction have been developed. These display the factors of importance in relation to friction and provide a theoretical background to the experimental measurements of effective viscosity and friction which will be described in part IV.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review of Elasto-Hydrodynamic Lubrication Theory
Lugt, P. M., & Morales-Espejel, G. E. (2011) · Tribology Transactions · doi:10.1080/10402004.2010.551804 · Cited by 260
The Rheological Properties of Elastohydrodynamic Lubricants
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_134_02 · Cited by 243
Elastohydrodynamic and micro-elastohydrodynamic lubrication
Dowson, D. (1995) · Wear · doi:10.1016/0043-1648(95)06660-8 · Cited by 213
Regimes of Traction in Elastohydrodynamic Lubrication
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_135_02 · Cited by 152
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
Metadata
- Authors
- Crook, A. W.
- Venue
- Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1961-12-21
- Volume
- 254
- Issue
- 1040
- Pages
- 237-258
- ISSN
- 0080-4614 (ISSN-L)
- 2054-0272
- OpenAlex
- W2153378849
- Cited by
- 121
- References
- 0
- FWCI
- 4.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The lubrication of rollers III. A theoretical discussion of friction and the temperatures in the oil film. https://app.cochat.ai/papers/10.1098/rsta.1961.0016
- The paper
- Crook, A. W. (1961). The lubrication of rollers III. A theoretical discussion of friction and the temperatures in the oil film. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. https://doi.org/10.1098/rsta.1961.0016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.