CoChat

The lubrication of rollers III. A theoretical discussion of friction and the temperatures in the oil film

Crook, A. W. · 1961 · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
Cited by 121

The DOI matches its Crossref record.

Abstract

Measurements of the thickness of the oil film have shown that the lubrication of loaded rollers is hydrodynamic in character. But hitherto the theories of this lubrication have been isothermal; frictional heating has been ignored. For the understanding of the frictional behaviour and also to define the physical conditions met by the oil in its passage through the conjunction of the disks a knowledge of the temperatures in the film is required. It is from the shearing of the oil in the film that the frictional heat arises. In this paper the dissipation of the heat by conduction through the oil to the surfaces of the disks and by transport with the oil (i.e. convection) are both considered. The temperatures in the film are assessed from the balance between the rates of generation and dissipation of heat. It is shown that in pure rolling the temperatures arising from friction are confined to the entry side ahead of the region of high pressure and that for the range of conditions considered the tem ­peratures are too low to influence thickness. With sliding it is shown that conduction is the important mechanism of dissipation and that the temperatures due to the sliding rise with pressure. On the entry side where the pressures are low, so are the temperatures. This explains the insensitivity of film thickness to sliding which has been demonstrated experimentally. Within the pressure zone high temperatures occur (e.g. a temperature rise of 200 deg C ). The distributions of temperature and viscosity have been found and also the velocity profiles of the oil. These show the cooler oil close to the surfaces of the disks to act almost as a rigid extension of the disks themselves; a situation akin to that postulated in boundary lubrication. From the viscosity distributions, expressions for the effective viscosity within the pressure zone (i.e. that constant viscosity which would give the same frictional traction) and for the frictional traction have been developed. These display the factors of importance in relation to friction and provide a theoretical background to the experimental measurements of effective viscosity and friction which will be described in part IV.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1098/rsta.1961.0016

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Crook, A. W.
Venue
Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
Published
1961-12-21
Volume
254
Issue
1040
Pages
237-258
ISSN
  • 0080-4614 (ISSN-L)
  • 2054-0272
OpenAlex
W2153378849
Cited by
121
References
0
FWCI
4.18
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.