Regimes of Traction in Elastohydrodynamic Lubrication
The DOI matches its Crossref record; 15 of the 16 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
The rheological behaviour of the lubricant in an elastohydrodynamic contact depends upon the properties of the fluid and the imposed conditions of load, speed and temperature. For a lubricant of known rheological properties, it is shown how a ‘map’ can be constructed in which different areas of the map correspond to different regimes of behaviour. The coordinates chosen for the map are non-dimensional pressure and a parameter which is closely related to the film thickness. Given the load, speed and temperature, the operating conditions can be located as a point in the map. Maps have been constructed for three fluids: a mineral oil, polyphenyl ether 5P4E and a traction fluid. In general the maps display four regimes: (a) Newtonian, (b) Eyring, (c) viscoelastic and (d) elastic-plastic. Appropriate constitutive equations are proposed for each regime from which the traction forces can be predicted. The maximum traction coefficients calculated in this way are well supported by experiment.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Literature has at points misused analytical lubricated friction formulas, such as those presented by Evans and Johnson [36] in gear applications where sliding-rolling motion is present.”
From Application of Tribological Artificial Neural Networks in Machine Elements (2023) · cites this paper as Evans and Johnson [36]
Citations
Cites
Johnson, K. L. (1985) · Cambridge University Press eBooks · doi:10.1017/cbo9781139171731 · Cited by 7,796
Self-citationThe temperature of rubbing surfaces
Archard, J. F. (1959) · Wear · doi:10.1016/0043-1648(59)90159-0 · Cited by 1,062
Shear behaviour of elastohydrodynamic oil films
Johnson, K. L., & Tevaarwerk, J. L. (1977) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1977.0129 · Cited by 515
Self-citationTheory of perfectly plastic solids
Friesinger, R. (1951) · Journal of the Franklin Institute · doi:10.1016/0016-0032(51)90064-6 · Cited by 479
Roelands, C. J. A., Vlugter, J. C., & Waterman, H. I. (1963) · Journal of Basic Engineering · doi:10.1115/1.3656919 · Cited by 291
The Rheological Properties of Elastohydrodynamic Lubricants
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_134_02 · Cited by 243
Self-citationShear Strength Measurements of Lubricants at High Pressure
Bair, S., & Winer, W. O. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453339 · Cited by 230
Chittenden, R. J., Dowson, D., Dunn, J. F., & Taylor, C. M. (1985) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1985.0014 · Cited by 230
The lubrication of rollers IV. Measurements of friction and effective viscosity
Crook, A. W. (1963) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1963.0005 · Cited by 152
Elastohydrodynamic Lubrication
Halling, J. (1978) · doi:10.1007/978-1-349-04138-1_11 · Cited by 147
Research works printed but not linked: 2
- Frost M. J., Ashby M. F. Deformation—mechanism maps, 1982 (Pergamon Press, Oxford).
- 10.1098/rspa.1975.0109 · DOI
Cited by
Spikes, H. A. (2006) · Lubrication Science · doi:10.1002/ls.23 · Cited by 171
History, Origins and Prediction of Elastohydrodynamic Friction
Spikes, H. A., & Zhang, J. (2014) · Tribology Letters · doi:10.1007/s11249-014-0396-y · Cited by 167
“9 to adjust the bulk temperature and sliding speed during friction tests so as to obtain isothermal EHD friction data over a very wide range of conditions for three lubricants [36, 37].”
BackgroundLubricant properties for input to hydrodynamic and elastohydrodynamic lubrication analyses
Larsson, R., Larsson, P. O., Eriksson, E., Sjöberg, M., & Höglund, E. (2000) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650001542981 · Cited by 116
On friction regimes in quantitative elastohydrodynamics
Habchi, W., Bair, S. S., & Vergne, P. (2012) · Tribology International · doi:10.1016/j.triboint.2012.10.005 · Cited by 104
“In having a quantitative, physics-based approach this work differs from most other investigations of regimes of EHL traction, for example [14].”
Thermal elastohydrodynamic analysis of circular contacts Part 1: Newtonian model
Kim, H. J., Ehret, P., Dowson, D., & Taylor, C. M. (2001) · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · doi:10.1243/1350650011543583 · Cited by 108
Metadata
- Authors
- Evans, C. R., & Johnson, K. L.
- Affiliations
- University of Cambridge (GB)
- Venue
- Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science
- Publisher
- SAGE Publications
- Published
- 1986-09
- Volume
- 200
- Issue
- 5
- Pages
- 313-324
- ISSN
- 0263-7154 (ISSN-L)
- 2058-3397
- OpenAlex
- W2053048400
- Cited by
- 152
- References
- 14
- Citations by year
- 2026: 1 · 2025: 3 · 2023: 5 · 2022: 4 · 2021: 6 · 2020: 6 · 2019: 7 · 2018: 5 · 2017: 7 · 2016: 5 · 2015: 7 · 2014: 8 · 2013: 7 · 2012: 5
- FWCI
- 7.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Keywords
- elastohydrodynamic lubrication, lubricant rheology, traction coefficient, Eyring model, viscoelastic lubricant, traction fluids, film thickness, constitutive equations, non-Newtonian lubrication
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Regimes of Traction in Elastohydrodynamic Lubrication. https://app.cochat.ai/papers/10.1243/pime_proc_1986_200_135_02
- The paper
- Evans, C. R., & Johnson, K. L. (1986). Regimes of Traction in Elastohydrodynamic Lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science. https://doi.org/10.1243/pime_proc_1986_200_135_02
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.