The lubrication of rollers IV. Measurements of friction and effective viscosity
The DOI matches its Crossref record.
Abstract
Measurements of friction with disk machines are described. The measurements have been made under conditions which fit them particularly for comparison with the theory of hydrodynamic lubrication of rollers and with the theory of frictional heating which has been developed in part III. The frictions due to rolling and sliding have been measured separately. It is shown that the frictional tractions T1 and T2 acting upon the surfaces of two disks can be expressed by — _ T _ where TR is the traction due to rolling and Ts is that due to sliding. If the disk 1 runs freely in frictionless bearings T1 must be zero and the disk runs in the condition TR = Ts. A four-disk machine is described in which the central disk, since it has no bearings, runs in the above condition unless some external torque is imposed upon it. External torques were applied by a band brake and from the curves of traction against sliding thereby obtained both and the way in which Ts increases with sliding speed were deduced. It is shown that in the elasto-hydrodynamic regime TR is independent of load and simply proportional to the thickness of the hydrodynamic film. It is also shown that this behaviour follows from the hydrodynamic theory and that the magnitudes of the rolling friction as predicted by theory and as deduced from experiment are substantially in accord. From experimental determinations of film thickness and from the linear increase of Ts with sliding speed over the range of sliding speeds employed ( ~ 1 cm s-1) values of the effective viscosity ( rjm) at the rolling point were deduced and are presented as a function of rolling speed {u as | ( mj +«2)). By effective viscosity is meant that constant viscosity throughout the conjunction of the disks which would give rise to the observed friction. It is shown that the values of so obtained when extrapolated to zero rolling speed are consistent with published results of experiments with dropping ball viscometers in high-pressure apparatus (Pressure Viscosity Report 1953) both with respect to the effects of pressure and of temperature. But the more important feature of the results from the disk experiments is that they show the effects of pressure and temperature upon the apparent viscosity of the oil to diminish as the rolling speed is increased, i.e. as the time for which the oil is under stress diminishes. This behaviour is interpreted in terms of a Maxwellian fluid and the required values of the elastic modulus in shear are deduced. However, although the visco-elastic hypothesis accounts for the observations it is stressed that it cannot yet be taken as the definitive explanation. In a further series of experiments a two-disk machine adapted for the direct measurement of friction independently of bearing frictions was used to explore sliding speeds up to 400 cm s-1. In contrast with the previous measurements, at such speeds of sliding frictional heating has a major effect upon effective viscosity, for example, in a particular instance the introduction of 400 cm s-1 sliding caused the effective viscosity to fall from ~ 3000 P at the rolling point to ~ 20 P. It is shown that the frictions and effective viscosities predicted by the theory of frictional heating (part III) and the measurements now reported are, in their larger aspects, substantially in accord. For example, in a particular instance theory predicted a coefficient of friction of 0-05 whereas experiment gave a coefficient of 0.03 and both experiment and theory show that as the sliding speed increases the friction rises to a maximum and then falls. But the theory of part III when applied to the experimental results leads to a value of the thermal conductivity of the oil of about half that to be expected from Bridgman’s work (1949). However, measurements in finer detail of friction up to a sliding speed of 30 cm s-1 indicate that an intrinsic effect (i.e. an effect at constant temperature) of rate of strain upon viscosity exists. By taking this into account the anomaly with respect to thermal conductivity can be resolved. The experimental results show clearly that in a lubricating system of widespread type (e.g. ballraces, gears) a mineral oil exhibits distinctive dynamic characteristics which are of significance with respect both to friction and to the thickness of the hydrodynamic oil film. The comparison of experiment and theory also emphasizes the importance of the thermal conductivity of the oil in relation to friction and to the temperatures in the oil film.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Shear behaviour of elastohydrodynamic oil films
Johnson, K. L., & Tevaarwerk, J. L. (1977) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1977.0129 · Cited by 515
The Rheological Properties of Elastohydrodynamic Lubricants
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_134_02 · Cited by 243
Regimes of Traction in Elastohydrodynamic Lubrication
Evans, C. R., & Johnson, K. L. (1986) · Proceedings of the Institution of Mechanical Engineers, Part C: Mechanical Engineering Science · doi:10.1243/pime_proc_1986_200_135_02 · Cited by 152
A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Wu, S., & Cheng, H. S. (1991) · Tribology Transactions · doi:10.1080/10402009108982050 · Cited by 83
Dowson, D. (1967) · Proceedings of the Institution of Mechanical Engineers, Conference Proceedings · doi:10.1243/pime_conf_1967_182_014_02 · Cited by 63
Metadata
- Authors
- Crook, A. W.
- Venue
- Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1963-01-17
- Volume
- 255
- Issue
- 1056
- Pages
- 281-312
- ISSN
- 0080-4614 (ISSN-L)
- 2054-0272
- OpenAlex
- W1963980892
- Cited by
- 152
- References
- 0
- FWCI
- 8.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The lubrication of rollers IV. Measurements of friction and effective viscosity. https://app.cochat.ai/papers/10.1098/rsta.1963.0005
- The paper
- Crook, A. W. (1963). The lubrication of rollers IV. Measurements of friction and effective viscosity. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences. https://doi.org/10.1098/rsta.1963.0005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.