The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
The properties of foams and lattices
Abstract
Man and nature both exploit the remarkable properties of cellular solids, by which we mean foams, meshes and microlattices. To the non-scientist, their image is that of soft, compliant, things: cushions, packaging and padding. To the food scientist they are familiar as bread, cake and desserts of the best kind: meringue, mousse and sponge. To those who study nature they are the structural materials of their subject: wood, coral, cancellous bone. And to the engineer they are of vast importance in building lightweight structures, for energy management, for thermal insulation, filtration and much more. When a solid is converted into a material with a foam-like structure, the single-valued properties of the solid are extended. By properties we mean stiffness, strength, thermal conductivity and diffusivity, electrical resistivity and so forth. And the extension is vast—the properties can be changed by a factor of 1000 or more. Perhaps the most important concept in analysing the mechanical behaviour is that of the distinction between a stretch- and a bending-dominated structure. The first is exceptionally stiff and strong for a given mass; the second is compliant and, although not strong, it absorbs energy well when compressed. This paper summarizes a little of the way in which the mechanical properties of cellular solids are analysed and illustrates the range of properties offered by alternative configurations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Self-citationCellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Self-citationAshby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
Self-citationEffective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Self-citationFoam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Self-citationL. On the calculation of the equilibrium and stiffness of frames
Maxwell, J. C. (1864) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786446408643668 · Cited by 1,028
Matrix analysis of statically and kinematically indeterminate frameworks
Pellegrino, S., & Calladine, C. R. (1986) · International Journal of Solids and Structures · doi:10.1016/0020-7683(86)90014-4 · Cited by 810
Calladine, C. R. (1983) · Cambridge University Press eBooks · doi:10.1017/cbo9780511624278 · Cited by 729
The deformation of foamed elastic materials
Gent, A. N., & Thomas, A. G. (1959) · Journal of Applied Polymer Science · doi:10.1002/app.1959.070010117 · Cited by 243
Duckett, R. A., Rabinowitz, S., & Ward, I. M. (1970) · Journal of Materials Science · doi:10.1007/bf00574864 · Cited by 198
Cited by
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Design and Optimization of Lattice Structures: A Review
Pan, C., Han, Y., & Lu, J. (2020) · Applied Sciences · doi:10.3390/app10186374 · Cited by 640
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Micro‐/Nanostructured Mechanical Metamaterials
Lee, J., Singer, J. P., & Thomas, E. L. (2012) · Advanced Materials · doi:10.1002/adma.201201644 · Cited by 559
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Abueidda, D. W., Elhebeary, M., Shiang, C.-S. (., Pang, S., Abu Al-Rub, R. K., & Jasiuk, I. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107597 · Cited by 491
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.006 · Cited by 481
Abueidda, D. W., Bakir, M., Abu Al-Rub, R. K., Bergström, J. S., Sobh, N. A., & Jasiuk, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.018 · Cited by 455
The mechanics and design of a lightweight three-dimensional graphene assembly
Qin, Z., Jung, G. S., Kang, M. J., & Buehler, M. J. (2017) · Science Advances · doi:10.1126/sciadv.1601536 · Cited by 453
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Mechanical performance of additively manufactured meta-biomaterials
Zadpoor, A. A. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.038 · Cited by 429
Thermal conductivity of porous materials
Smith, D. S., Alzina, A., Bourret, J., Nait-Ali, B., Pennec, F., Tessier-Doyen, N., Otsu, K., Matsubara, H., Elser, P., & Gonzenbach, U. T. (2013) · Journal of Materials Research · doi:10.1557/jmr.2013.179 · Cited by 407
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 375
Mechanically robust lattices inspired by deep-sea glass sponges
Fernandes, M. C., Aizenberg, J., Weaver, J. C., & Bertoldi, K. (2021) · Nature Materials · doi:10.1038/s41563-020-0798-1 · Cited by 370
Functionalized graphene sheet filled silicone foam nanocomposites
Verdejo, R., Barroso-Bujans, F., Rodriguez-Perez, M. A., Antonio de Saja, J., & Lopez-Manchado, M. A. (2008) · Journal of Materials Chemistry · doi:10.1039/b718289a · Cited by 364
Contact Lens Materials: A Materials Science Perspective
Musgrave, C. S. A., & Fang, F. (2019) · Materials · doi:10.3390/ma12020261 · Cited by 355
Mahmoud, D., & Elbestawi, M. (2017) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp1020013 · Cited by 338
Stabilization of bubbles and foams
Murray, B. S. (2007) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2007.07.009 · Cited by 333
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces
Abueidda, D. W., Abu Al-Rub, R. K., Dalaq, A. S., Lee, D.-W., Khan, K. A., & Jasiuk, I. (2016) · Mechanics of Materials · doi:10.1016/j.mechmat.2016.01.004 · Cited by 317
Design of lattice structure for additive manufacturing
Tao, W., & Leu, M. C. (2016) · 2016 International Symposium on Flexible Automation (ISFA) · doi:10.1109/isfa.2016.7790182 · Cited by 316
Highly stretchable carbon aerogels
Guo, F., Jiang, Y., Xu, Z., Xiao, Y., Fang, B., Liu, Y., Gao, W., Zhao, P., Wang, H., & Gao, C. (2018) · Nature Communications · doi:10.1038/s41467-018-03268-y · Cited by 313
Li, D., Liao, W., Dai, N., Dong, G., Tang, Y., & Xie, Y. M. (2018) · Computer-Aided Design · doi:10.1016/j.cad.2018.06.003 · Cited by 303
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Zhang, X. Z., Leary, M., Tang, H. P., Song, T., & Qian, M. (2018) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2018.05.002 · Cited by 285
A review on integration of lightweight gradient lattice structures in additive manufacturing parts
Seharing, A., Azman, A. H., & Abdullah, S. (2020) · Advances in Mechanical Engineering · doi:10.1177/1687814020916951 · Cited by 270
Reexamining the mechanical property space of three-dimensional lattice architectures
Meza, L. R., Phlipot, G. P., Portela, C. M., Maggi, A., Montemayor, L. C., Comella, A., Kochmann, D. M., & Greer, J. R. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.08.052 · Cited by 268
Arabnejad, S., & Pasini, D. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.10.003 · Cited by 266
Digital Morphing Wing: Active Wing Shaping Concept Using Composite Lattice-Based Cellular Structures
Jenett, B., Calisch, S., Cellucci, D., Cramer, N., Gershenfeld, N., Swei, S., & Cheung, K. C. (2017) · Soft Robotics · doi:10.1089/soro.2016.0032 · Cited by 265
A review of the recent trends on core structures and impact response of sandwich panels
Ma, Q., Rejab, M., Siregar, J., & Guan, Z. (2021) · Journal of Composite Materials · doi:10.1177/0021998321990734 · Cited by 259
Zhao, M., Liu, F., Fu, G., Zhang, D. Z., Zhang, T., & Zhou, H. (2018) · Materials · doi:10.3390/ma11122411 · Cited by 257
Low‐Density Open Cellular Sponges as Functional Materials
Jiang, S., Agarwal, S., & Greiner, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700684 · Cited by 217
Metadata
- Authors
- Ashby, M. F.
- Venue
- Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2005-11-29
- Volume
- 364
- Issue
- 1838
- Pages
- 15-30
- ISSN
- 1364-503X (ISSN-L)
- 1471-2962
- OpenAlex
- W2079930781
- Cited by
- 1,771
- References
- 15
- FWCI
- 14.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.