The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
X-ray study of the oxidation of liquid-gallium surfaces
Open accessAbstract
The oxidation of liquid-gallium surfaces has been investigated with surface x-ray scattering techniques. By exposing the liquid-metal surface at room temperature to doses on the order of 180 L of oxygen where 1 L=${10}^{\mathrm{\ensuremath{-}}6}$ Torr s, a gallium oxide film with a well-defined thickness of \ensuremath{\sim}5 \AA{} readily forms. The oxide thickness and roughness of the liquid/oxide and oxide/vapor interfaces do not change with oxygen dosage up to 1600 L nor with temperature up to 573 K. This is in contrast to what is observed for the bare liquid-Ga surface, which is roughened significantly by thermally excited capillary waves with temperatures up to only 443 K. This is a good indication that the oxide layer provides rigidity to the liquid surface and is likely a solid; grazing-incidence measurements suggest that the film is amorphous or poorly crystallized. Based on comparisons with known crystal structures, models are suggested for the atomic arrangements in the gallium oxide layer and its interface with the underlying liquid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Greenwood, N. N., & Earnshaw, A. (1984) · Cited by 5,489
X-Ray Reflectivity Measurements of Surface Layering in Liquid Mercury
Magnussen, O. M., Ocko, B. M., Regan, M. J., Penanen, K., Pershan, P. S., & Deutsch, M. (1995) · Physical Review Letters · doi:10.1103/physrevlett.74.4444 · Cited by 351
Self-citation
Cited by
Stretchable and Soft Electronics using Liquid Metals
Dickey, M. D. (2017) · Advanced Materials · doi:10.1002/adma.201606425 · Cited by 1,776
Dickey, M. D., Chiechi, R. C., Larsen, R. J., Weiss, E. A., Weitz, D. A., & Whitesides, G. M. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200701216 · Cited by 1,468
Liquid metals: fundamentals and applications in chemistry
Daeneke, T., Khoshmanesh, K., Mahmood, N., de Castro, I. A., Esrafilzadeh, D., Barrow, S. J., Dickey, M. D., & Kalantar-zadeh, K. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00043j · Cited by 1,222
Markvicka, E. J., Bartlett, M. D., Huang, X., & Majidi, C. (2018) · Nature Materials · doi:10.1038/s41563-018-0084-7 · Cited by 1,067
Ma, Z., Huang, Q., Xu, Q., Zhuang, Q., Zhao, X., Yang, Y., Qiu, H., Yang, Z., Wang, C., Chai, Y., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00902-3 · Cited by 772
Emerging Applications of Liquid Metals Featuring Surface Oxides
Dickey, M. D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5043017 · Cited by 719
Materials and Structures toward Soft Electronics
Wang, C., Wang, C., Huang, Z., & Xu, S. (2018) · Advanced Materials · doi:10.1002/adma.201801368 · Cited by 662
Reversibly Deformable and Mechanically Tunable Fluidic Antennas
So, J., Thelen, J., Qusba, A., Hayes, G. J., Lazzi, G., & Dickey, M. D. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900604 · Cited by 555
Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles
Lin, Y., Genzer, J., & Dickey, M. D. (2020) · Advanced Science · doi:10.1002/advs.202000192 · Cited by 503
Liquid metal enabled microfluidics
Khoshmanesh, K., Tang, S.-Y., Zhu, J. Y., Schaefer, S., Mitchell, A., Kalantar-zadeh, K., & Dickey, M. D. (2017) · Lab on a Chip · doi:10.1039/c7lc00046d · Cited by 458
Mechanically Sintered Gallium–Indium Nanoparticles
Boley, J. W., White, E. L., & Kramer, R. K. (2015) · Advanced Materials · doi:10.1002/adma.201404790 · Cited by 439
Giant and switchable surface activity of liquid metal via surface oxidation
Khan, M. R., Eaker, C. B., Bowden, E. F., & Dickey, M. D. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1412227111 · Cited by 434
Parida, K., Thangavel, G., Cai, G., Zhou, X., Park, S., Xiong, J., & Lee, P. S. (2019) · Nature Communications · doi:10.1038/s41467-019-10061-y · Cited by 426
Liquid Metal Direct Write and 3D Printing: A Review
Neumann, T. V., & Dickey, M. D. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000070 · Cited by 332
Methods to pattern liquid metals
Joshipura, I. D., Ayers, H. R., Majidi, C., & Dickey, M. D. (2015) · Journal of Materials Chemistry C · doi:10.1039/c5tc00330j · Cited by 326
Suarez, F., Parekh, D. P., Ladd, C., Vashaee, D., Dickey, M. D., & Öztürk, M. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.181 · Cited by 317
Shaping a Soft Future: Patterning Liquid Metals
Ma, J., Krisnadi, F., Vong, M. H., Kong, M., Awartani, O. M., & Dickey, M. D. (2023) · Advanced Materials · doi:10.1002/adma.202205196 · Cited by 311
Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals
Carey, B. J., Ou, J. Z., Clark, R. M., Berean, K. J., Zavabeti, A., Chesman, A. S. R., Russo, S. P., Lau, D. W. M., Xu, Z.-Q., Bao, Q., et al. (2017) · Nature Communications · doi:10.1038/ncomms14482 · Cited by 292
Doudrick, K., Liu, S., Mutunga, E. M., Klein, K. L., Damle, V., Varanasi, K. K., & Rykaczewski, K. (2014) · Langmuir · doi:10.1021/la5012023 · Cited by 285
Wang, J., Cai, G., Li, S., Gao, D., Xiong, J., & Lee, P. S. (2018) · Advanced Materials · doi:10.1002/adma.201706157 · Cited by 274
Liquid metal batteries for future energy storage
Zhang, S., Liu, Y., Fan, Q., Zhang, C., Zhou, T., Kalantar-Zadeh, K., & Guo, Z. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00531f · Cited by 268
Knight, M. W., Coenen, T., Yang, Y., Brenny, B. J. M., Losurdo, M., Brown, A. S., Everitt, H. O., & Polman, A. (2015) · ACS Nano · doi:10.1021/nn5072254 · Cited by 174
Metadata
- Authors
- Regan, M. J., Tostmann, H., Pershan, P. S., Magnussen, O. M., DiMasi, E., Ocko, B. M., & Deutsch, M.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 1997-04-15
- Volume
- 55
- Issue
- 16
- Pages
- 10786-10790
- ISSN
- 0163-1829 (ISSN-L)
- 1095-3795
- OpenAlex
- W2165597759
- Cited by
- 325
- References
- 2
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.