The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Studies on erosion-corrosion behaviour of plasma sprayed Ni3Al coating in a coal-fired thermal power plant environment at 540°C
Abstract
Purpose: The purpose of this study is to investigate the application of Ni 3 Al coating for boilers and other power plant equipment, which suffer severe erosion-corrosion problems resulting in substantial losses. Currently, superalloys are being used to increase the service life of the boilers. Although the superalloys have adequate mechanical strength at elevated temperature, they often lack resistance to erosion-corrosion environments. Design/methodology/approach: In this paper, the erosion-corrosion performance of plasma-sprayed nickel aluminide (Ni 3 Al) coating on nickel- and iron-based superalloys have been evaluated by exposing them to the low temperature primary superheater zone of the coal-fired thermal power plant at the temperature zone of 540°C for ten cycles of 100 h duration. The exposed products were analysed along the surface and cross-section using scanning electron microscopy (SEM), X-ray diffraction (XRD) and electron micro probe analysis (EPMA). Findings: The XRD, SEM and EPMA analyses have shown the formation of mainly NiO, NiAl 2 O 4 and indicated the presence of Ni 3 Al, Ni and Al 2 O 3. In the boiler environment, Ni 3 Al coating partially oxidizes and acts as a perfect barrier against erosion-corrosion of superalloys. The partially oxidised Ni 3 Al coating remains intact even after 1,000 h cycle exposure. Originality/value: The probable mechanism of attack for the plasma-sprayed Ni 3 Al coating in the given boiler environment is presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mechanisms for the hot corrosion of nickel-base alloys
Goebel, J. A., Pettit, F. S., & Goward, G. W. (1973) · Metallurgical Transactions · doi:10.1007/bf02649626 · Cited by 420
Rafting in single crystal nickel-base superalloys — An overview
Kamaraj, M. (2003) · Sadhana · doi:10.1007/bf02717129 · Cited by 194
Thermal Sprayed Coatings Used Against Corrosion and Corrosive Wear
Fauchais, P. L., & Vardelle, A. M. (2012) · InTech eBooks · doi:10.5772/34448 · Cited by 177
Fundamental studies associated with the plasma spray process
Pfender, E. (1988) · Surface and Coatings Technology · doi:10.1016/0257-8972(88)90083-7 · Cited by 158
Studies on the transient stage of oxidation of VPS and HVOF sprayed MCrAlY coatings
Toma, D., Brandl, W., & Köster, U. (1999) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00332-1 · Cited by 148
Sidhu, B. S., & Prakash, S. (2002) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00772-7 · Cited by 146
Self-citationReview of inorganic coatings and coating processes for reducing wear and corrosion
Sidky, P. S., & Hocking, M. G. (1999) · British Corrosion Journal · doi:10.1179/000705999101500815 · Cited by 143
Environmental Degradation of Metals: Corrosion Technology Series/14
Chatterjee, U. K., Bose, S. K., & Roy, S. K. (2001) · CRC Press eBooks · doi:10.1201/9781482292244 · Cited by 130
Erosion classification of materials using a centrifugal erosion tester
Söderberg, S., Hogmark, S., Engman, U., & Swahn, H. (1981) · Tribology International · doi:10.1016/0301-679x(81)90101-8 · Cited by 114
Wang, Y., & Chen, W. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.08.080 · Cited by 94
Research works printed but not linked: 4
- 2001, Environmental Degradation of Metals
- 2004, Handbook of Thermal Spray Technology
- 2001, Thermal spraying and detonation spray gun processes, 77
- 2001, Tube failures in coal fired boilers, 245
Cited by
Prashar, G., Vasudev, H., & Thakur, L. (2021) · Surface Review and Letters · doi:10.1142/s0218625x22300039 · Cited by 43
Nanocrystalline Cermet Coatings for Erosion–Corrosion Protection
Tiwari, A. K., Seman, S., Singh, G., & Jayaganthan, R. (2019) · Coatings · doi:10.3390/coatings9060400 · Cited by 42
Surface topology analysis of plasma sprayed Inconel625-Al2O3 composite coating
Prashar, G., & Vasudev, H. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.03.090 · Cited by 34
High Temperature Corrosion Resistant and Anti-slagging Coatings for Boilers: A Review
Khantisopon, K., Singh, S., Jitputti, J., Berndt, C. C., & Ang, A. S. M. (2024) · High Temperature Corrosion of Materials · doi:10.1007/s11085-024-10251-0 · Cited by 30
Advancement in cermet based coating on steel substrate: A review
Alam, S., & Das, A. K. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.02.260 · Cited by 27
Metadata
- Authors
- Mishra, S. B., Chandra, K., & Prakash, S.
- Venue
- Anti-Corrosion Methods and Materials
- Publisher
- Emerald
- Published
- 2017-09-04
- Volume
- 64
- Issue
- 5
- Pages
- 540-549
- ISSN
- 0003-5599 (ISSN-L)
- OpenAlex
- W2738650838
- Cited by
- 19
- References
- 29
- Citations by year
- 2025: 2 · 2024: 2 · 2023: 1 · 2022: 3 · 2021: 4 · 2020: 1 · 2019: 4 · 2018: 2
- FWCI
- 1.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.emerald.com/insight/site-policies (tdm)
- Locations
- Anti-Corrosion Methods and Materials (publishedVersion)
- Funders
- Indian Institute of Technology Roorkee
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › Erosion and Abrasive Machining
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- erosion-corrosion, nickel aluminide, coal-fired power plants, boiler superheater, nickel-based superalloy, iron-based superalloys, high-temperature oxidation, NiO formation, NiAl2O4, protective coatings
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Studies on erosion-corrosion behaviour of plasma sprayed Ni3Al coating in a coal-fired thermal power plant environment at 540°C. https://app.cochat.ai/papers/10.1108/acmm-11-2015-1592
- The paper
- Mishra, S. B., Chandra, K., & Prakash, S. (2017). Studies on erosion-corrosion behaviour of plasma sprayed Ni3Al coating in a coal-fired thermal power plant environment at 540°C. Anti-Corrosion Methods and Materials. https://doi.org/10.1108/acmm-11-2015-1592
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.