The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Erosion–corrosion behaviour of Ni–20Cr plasma coating in actual boiler environment
Abstract
Erosion–corrosion is encountered in a large variety of engineering industries. In such environments, protective coatings are used. In this investigation, erosion–corrosion of the Ni–20Cr coating on nickel and iron based superalloys has been investigated by subjecting them to the boiler of coal fired thermal power plant at the temperature zone of 540°C for 1000 h duration. The erosion–corrosion kinetics of the plasma sprayed Ni–20Cr coating on different superalloys has been investigated. XRD, SEM with EDS and EPMA have been used to analyse the eroded–corroded products along the surface and cross-section. Main phases identified in all the Ni–20Cr coated superalloys after exposure are NiO, Cr 2 O 3, Al 2 O 3 and SiO 2. Aluminium has penetrated from the bond coat to the top coat along the splat boundaries. Oxides of chromium, nickel and aluminium are recognized as protective oxides for boiler environment. The probable mechanism of attack for Ni–20Cr coating in the given boiler environment is discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mechanisms for the hot corrosion of nickel-base alloys
Goebel, J. A., Pettit, F. S., & Goward, G. W. (1973) · Metallurgical Transactions · doi:10.1007/bf02649626 · Cited by 420
Designing oxidation-resistant coatings
Nicholls, J. R. (2000) · JOM · doi:10.1007/s11837-000-0112-2 · Cited by 300
Protective coatings – purpose, role, and design
Goward, G. W. (1986) · Materials Science and Technology · doi:10.1179/026708386790123314 · Cited by 162
Matthews, S. J., James, B., & Hyland, M. H. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.01.030 · Cited by 140
Oxidation Mechanism of Ni—20Cr Foils and Its Relation to the Oxide-Scale Microstructure
Calvarin, G., Molins, R., & Huntz, A. M. (2000) · Oxidation of Metals · doi:10.1023/a:1004578513020 · Cited by 130
Characterisation and Corrosion-Erosion Behaviour of Carbide based Thermal Spray Coatings
Chatha, S. S., Sidhu, H. S., & Sidhu, B. S. (2012) · Journal of Minerals and Materials Characterization and Engineering · doi:10.4236/jmmce.2012.116041 · Cited by 79
Studies on erosion behaviour of plasma sprayed coatings on a Ni-based superalloy
Mishra, S. B., Prakash, S., & Chandra, K. S. (2005) · Wear · doi:10.1016/j.wear.2005.02.098 · Cited by 79
Self-citationErosion - Corrosion of Cermet Coating
Rayes, M. M. E., Abdo, H. S., & Khalil, K. A. (2013) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)14085-5 · Cited by 78
Hidalgo, V. H., Varela, F. J. B., & Rico, E. F. (1997) · Tribology International · doi:10.1016/s0301-679x(97)00029-7 · Cited by 76
Oxidation behavior of sputter-deposited NiCrAlY coating
Li, M., Zhang, Z., Sun, X., Li, J., Yin, F., Hu, W., Guan, H. R., & Hu, Z. Q. (2002) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00738-7 · Cited by 70
Research works printed but not linked: 6
- Chatha SS, 2012, J. Miner. Mater. Character. Eng., 11, 569
- 10.1179/mst.1986.2.3.194 · doi:10.1179/mst.1986.2.3.194 · Paper page
- Berndt CC, 1979, Austr. Weld. Res., 6, 75
- Nicholls, 2000, J. Mater., 52, 28
- Prakash S, Singh S, Sidhu BS and Madeshia A: ‘Tube failures in coal fired boilers’, Proc. National Seminar on ‘Advances in material and processing’, Roorkee, India, November 2001, 245–253.
- Nelson HW, Krause HH, Ungar EW, Putnam AA, Slunder CJ, Miller PD, Hummel JD and Landry BA: ‘A review of available information on corrosion and deposits in coal and oil-fired boilers and gas turbines’, Report of ASME Research Committee on Corrosion and Deposits from Combustion Gases, Pub. Pergamon Press and ASME, New York, 1959.
Cited by
Combating hot corrosion of boiler tubes – A study
Kumar, S., Kumar, M., & Handa, A. (2018) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2018.08.004 · Cited by 207
Influence of processing conditions on the properties of thermal sprayed coating: a review
Kumar, S., & Kumar, R. (2021) · Surface Engineering · doi:10.1080/02670844.2021.1967024 · Cited by 168
Kumar, S., Handa, A., Chawla, V., Grover, N. K., & Kumar, R. (2021) · Surface Engineering · doi:10.1080/02670844.2021.1924506 · Cited by 133
Kumar, S., Kumar, M., & Handa, A. (2020) · Materials at High Temperatures · doi:10.1080/09603409.2020.1810922 · Cited by 101
Kumar, S., Kumar, M., & Handa, A. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5fae · Cited by 74
Metadata
- Authors
- Mishra, S. B., & Prakash, S.
- Affiliations
- Motilal Nehru National Institute of Technology (IN)
- Indian Institute of Technology Roorkee (IN)
- Corresponding author
- Mishra, S. B.
- ORCID
- Mishra, S. B.
- Venue
- Surface Engineering
- Publisher
- SAGE Publications
- Published
- 2015-01
- Volume
- 31
- Issue
- 1
- Pages
- 29-38
- ISSN
- 0267-0844 (ISSN-L)
- 1743-2944
- OpenAlex
- W1981425852
- Cited by
- 31
- References
- 29
- Citations by year
- 2025: 2 · 2024: 5 · 2023: 2 · 2022: 2 · 2021: 5 · 2020: 5 · 2019: 4 · 2018: 1 · 2017: 3 · 2016: 1 · 2015: 1
- FWCI
- 2.46
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
- Locations
- Surface Engineering (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › Erosion and Abrasive Machining
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- erosion-corrosion, plasma-sprayed coatings, coal-fired power plants, nickel-based superalloy, iron-based superalloys, protective oxide scale, bond coat, coating degradation mechanisms
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Erosion–corrosion behaviour of Ni–20Cr plasma coating in actual boiler environment. https://app.cochat.ai/papers/10.1179/1743294414y.0000000338
- The paper
- Mishra, S. B., & Prakash, S. (2015). Erosion–corrosion behaviour of Ni–20Cr plasma coating in actual boiler environment. Surface Engineering. https://doi.org/10.1179/1743294414y.0000000338
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.