Lean implementation in Indian process industries – some empirical evidence
The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Abstract
Purpose: – In the present era of intense competition, industries are adopting lean manufacturing for successful survival. The concept of lean manufacturing is new for Indian process industries. The purpose of this paper is to investigate the status of lean manufacturing in Indian process industries in terms of lean practices, reasons and challenges of implementing lean manufacturing. Design/methodology/approach: – A survey was carried out to assess the level of lean implementation in Indian process industries. Statistical tests were conducted to assess the significant lean practices, reasons and challenges of implementing lean in Indian process industries. Findings: – It is observed that the level of implementation of lean manufacturing in Indian process industries is still low. Results indicate that Indian process industries those who have implemented lean found lean to be very useful to reduce wastes and to increase quality. Major lean practices being implemented by Indian process industries are primarily those which are related to waste elimination or improvement in quality. Indian process industries found that important challenges to implement lean are to produce in small batches, to arrange for lean experts and to impart training to employees. Research limitations/implications: – In the present study, the sample size is small and hence, the findings should be generalized cautiously. Although the study indicates that lean can be very useful if implemented in Indian process industries but further empirical studies are required to quantify performance improvements through adoption of lean. Originality/value: – The paper explores status of lean adoption in Indian process industries. Considering the unique characteristics of process industries, the present research would be helpful for making strategies to implement lean in process industry setups.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adoption of the Lean-Kaizen approach improves the organization output by solving problems through identifying and implementing small improvements in process, product, and system [29, 30].”
From Lean and Kaizen: The Past and the Future of the Methodologies (2021) · cites this paper as [29]
Citations
Cites
Lean manufacturing: context, practice bundles, and performance
Shah, R., & Ward, P. T. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00108-0 · Cited by 2,897
Defining and developing measures of lean production
Shah, R., & Ward, P. T. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.019 · Cited by 2,399
Lean Thinking—Banish Waste and Create Wealth in your Corporation
Womack, J. P., & Jones, D. T. (1997) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600967 · Cited by 2,122
An assessment of survey research in POM: from constructs to theory
Malhotra, M. K., & Grover, V. (1998) · Journal of Operations Management · doi:10.1016/s0272-6963(98)00021-7 · Cited by 1,313
Abdulmalek, F. A., & Rajgopal, J. (2007) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.09.009 · Cited by 1,046
The Sustainability of University-Industry Research Collaboration: An Empirical Assessment
Lee, Y. S. (2000) · The Journal of Technology Transfer · doi:10.1023/a:1007895322042 · Cited by 706
Agile manufacturing: Enablers and an implementation framework
Gunasekaran, A. (1998) · International Journal of Production Research · doi:10.1080/002075498193291 · Cited by 598
The Benefits of Lean Manufacturing
Melton, T. (2005) · Chemical Engineering Research and Design · doi:10.1205/cherd.04351 · Cited by 571
Process industry supply chains: Advances and challenges
Shah, N. (2005) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2005.02.023 · Cited by 364
The effect of inventory management on firm performance
Koumanakos, D. P. (2008) · International Journal of Productivity and Performance Management · doi:10.1108/17410400810881827 · Cited by 281
Research works printed but not linked: 5
- Billesbach, J.T. (1994), “Applying lean production principles to a process facility”, Production & Inventory Management Journal , Vol. 35 No. 3, pp. 40-44.
- Cook, R.C. and Rogowski, R.A. (1996), “Applying JIT principles to continuous process manufacturing supply chains”, Production & Inventory Management Journal , Vol. 37 No. 1, pp. 12-16.
- Dov, M. (1992), “A manufacturing process with a different flavour: JIT and the ice cream industry”, Industrial Management , Vol. 34 No. 2, pp. 10-13.
- Dunstan, K. , Lavin, B. and Sanford, R. (2006), “The application of lean manufacturing in a mining environment”, Proceedings of the International Mine Management Conference in Melbourne, pp. 145-157.
- Upasani, S. (2012), “Emerging supply chain management practices in Indian manufacturing industries”, International Journal of Research in IT & Management , Vol. 2 No. 2, pp. 1237-1248.
Cited by
Barriers in green lean six sigma product development process: an ISM approach
Kumar, S., Luthra, S., Govindan, K., Kumar, N., & Haleem, A. (2016) · Production Planning & Control · doi:10.1080/09537287.2016.1165307 · Cited by 247
Lean practices and their effect on performance: a literature review
Negrão, L. L. L., Godinho Filho, M., & Marodin, G. (2016) · Production Planning & Control · doi:10.1080/09537287.2016.1231853 · Cited by 243
“Each analysed article investigated the implementation of practices based on consolidated methods, among which the most frequently used are Shah and Ward (2003, 2007), Karlsson and Ahlstrom (1996a), Panizzolo (1998), Womack, Jones, and roos (1990), White and ruch (1990), White, Pearson, and Wilson (1999) and Chong, Whi…”
BackgroundInfluentialYadav, G., Luthra, S., Huisingh, D., Mangla, S. K., Narkhede, B. E., & Liu, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118726 · Cited by 228
Abu, F., Gholami, H., Mat Saman, M. Z., Zakuan, N., & Streimikiene, D. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.279 · Cited by 197
“In the study by Panwar et al. (2015) and Abolhassani et al. (2016), a response rate of 20% and 16% was attained respectively; meanwhile, Thanki and Thakkar (2014) had gathered data from 32 different industries in India.”
BackgroundMethodResultInfluentialPanwar, A., Jain, R., Rathore, A. P. S., Nepal, B. P., & Lyons, A. C. (2017) · Production Planning & Control · doi:10.1080/09537287.2017.1397788 · Cited by 175
Self-citation
Metadata
- Authors
- Panwar, A., Jain, R., & Rathore, A. P. S.
- Affiliations
- Malaviya National Institute of Technology Jaipur (IN)
- Venue
- Journal of Manufacturing Technology Management
- Publisher
- Emerald
- Published
- 2015-02-02
- Volume
- 26
- Issue
- 1
- Pages
- 131-160
- ISSN
- 1741-038X (ISSN-L)
- OpenAlex
- W2021454603
- Cited by
- 101
- References
- 72
- Citations by year
- 2026: 4 · 2025: 4 · 2024: 11 · 2023: 7 · 2022: 9 · 2021: 16 · 2020: 17 · 2019: 12 · 2018: 5 · 2017: 11 · 2016: 5
- FWCI
- 15.28
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.emerald.com/insight/site-policies (tdm)
- Locations
- Journal of Manufacturing Technology Management (publishedVersion)
- Topics
- Social Sciences › Business, Management and Accounting › Management Information Systems › Quality and Supply Management
- Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Digital Transformation in Industry
- Keywords
- lean manufacturing, lean implementation, process industry, Indian manufacturing, lean practices, waste reduction, quality improvement, barriers to lean adoption, small-batch production, employee training
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lean implementation in Indian process industries – some empirical evidence. https://app.cochat.ai/papers/10.1108/jmtm-05-2013-0049
- The paper
- Panwar, A., Jain, R., & Rathore, A. P. S. (2015). Lean implementation in Indian process industries – some empirical evidence. Journal of Manufacturing Technology Management. https://doi.org/10.1108/jmtm-05-2013-0049
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.