Cited by 139Quality and Supply ManagementSustainable Supply Chain ManagementSupply Chain and Inventory Management

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Analysing supply chain integration through a systematic literature review: a normative perspective

Open access
Mustafa Kamal, Muhammad, Irani, Zahir·2014·Supply Chain Management: An International Journal

Abstract

Purpose: – This paper aims to focus on systematically analysing and synthesising the extant research published on supply chain integration (SCI) area, given the significance of SCI research area. More specifically, the authors aim to answer three questions: “Q1 – What are the factors (e.g. both driving and inhibiting) that influence SCI?”, “Q2 – What are the key developments (e.g. both in research and industry) in SCI area?” and “Q3 – What are the approaches employed/discussed to integrate supply chains?”. Over the past decade, SCI has gained increasing attention in the supply chain management (SCM) context, both from the practitioners’ perspective and as a research area. In realising the global transformations and competitive business environment, a number of organisations are collaborating with their supply chain (SC) partners, to conduct seamless SC operations. Design/methodology/approach: – A systematic and structured literature review is carried out to observe and understand the past trends and extant patterns/themes in the SCI research area, evaluate contributions and summarise knowledge, thereby identifying limitations, implications and potential directions of further research. Thus, to trace the implementation of SCI practices, a profiling approach is used to analyse 293 articles (published in English-speaking peer-reviewed journals between 2000 and 2013) extracted from the Scopus database. The Systematic Review Approach proposed by Tranfield et al. (2003) was followed to analyse and synthesise the extant literature on SCI area. Findings: – The analysis presented in this paper has identified relevant SCI research studies that have contributed to the development and accumulation of intellectual wealth to the SCI and SCM area. Each of the 293 papers was examined for achieving the aim and objectives of the research, the method of data collection, the data analysis method and quality measures. While some of the papers provided information on all of these categories, most of them failed to provide all the information, especially for Q2 and Q3 that resulted in 23 and 21 papers, respectively. Research limitations/implications: – This study would have benefited from the analysis of further journals; however, the analysis of 293 articles from leading journals in the field of operations and SCM was deemed sufficient in scope. Moreover, this research has implications for researchers, journal editors, practitioners, universities and research institutions. It is likely to form the basis and motivation for profiling other database resources and specific operations and SCM-type journals in this area. Practical implications: – This systematic literature review highlights a taxonomy of contextual factors driving and inhibiting SCI for researchers and SC practitioners to refer to while researching or implementing SCI. It also exemplifies some areas for future research, along with the need for researchers to focus on developing more practical techniques for implementing SCI and improving organisational performance. Originality/value: – The prime value and uniqueness of this paper lies in analysing and compiling the existing published material in relation to Q1, Q2 and Q3, including examining other variables (such as yearly publications, geographic location of each publication, type of publication, type of research methods used), which lacks in the recent published five SCI literature review-based articles (by Kim, 2013; Leuschner et al., 2013; Alfalla-Luque et al., 2013; Parente et al., 2008; Fabbe-Costes and Jahre, 2007). This has been achieved by extracting and synthesising existing publications using “Supply Chain Integration” keyword. This paper provides a critique of the conceptual and empirical works in SCI discipline and offers research agendas that can stimulate future researchers to carefully explore the topic.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1108/scm-12-2013-0491

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 128

  1. Alfalla-Luque, R. and Medina-Lopez, C. (2009), “Supply chain management: unheard of in the 1970s, core to today’s company”, Business History, Vol. 51 No. 2, pp. 201-220. · DOI
  2. Alfalla-Luque, R. , Medina-Lopez, C. and Dey, P.K. (2013), “Supply chain integration framework using literature review”, Production Planning & Control: The Management of Operations, Vol. 24 Nos 8/9, pp. 800-817. · DOI
  3. Amer, Y. , Luong, L. and Lee, S.-H. (2010), “Case study: optimizing order fulfilment in a global retail supply chain”, International Journal of Production Economics, Vol. 127 No. 2, pp. 278-291. · DOI
  4. Armistead, C.G. and Mapes, J. (1993), “The impact of supply chain integration on operating performance”, Logistics Information Management, Vol. 6 No. 4, pp. 9-14. · DOI
  5. Aryee, G. and Naim, M.M. (2008), “Supply chain integration using a maturity scale”, Journal of Manufacturing Technology Management, Vol. 19 No. 5, pp. 559-575. · DOI
  6. Azevedo, S.G. , Carvalho, H. and Machado, V.C. (2011), “The influence of green practices on supply chain performance: a case study approach”, Transportation Research Part E: Logistics and Transportation Review, Vol. 47 No. 6, pp. 850-871. · DOI
  7. Bernon, M. , Upperton, J. , Bastl, M. and Cullen, J. (2013), “An exploration of supply chain integration in the retail product returns process”, International Journal of Physical Distribution & Logistics Management, Vol. 43 No. 7, pp. 586-608. · DOI
  8. Bhattacharjee, D. and Mohanty, R.P. (2012), “Towards development of composite supply chain collaboration model”, International Journal of Logistics Systems and Management, Vol. 12 No. 2, pp. 123-147. · DOI
  9. Boon-itt, S. and Wong, C.Y. (2011), “The moderating effects of technological and demand uncertainties on the relationship between supply chain integration and customer delivery performance”, International Journal of Physical Distribution & Logistics Management, Vol. 41 No. 3, pp. 253-276. · DOI
  10. Boyson, S. , Corsi, T. and Verbraeck, A. (2003), “The e-supply chain portal: a core business model”, Transportation Research Part E: Logistics and Transportation Review, Vol. 39 No. 2, pp. 175-192. · DOI
  11. Braunscheidel, M.J. and Suresh, N.C. (2009), “The organizational antecedents of a firm’s supply chain agility for risk mitigation and response”, Journal of Operations Management, Vol. 27 No. 2, pp. 119-140. · DOI
  12. Campbell, J. and Sankaran, J. (2005), “An inductive framework for enhancing supply chain integration”, International Journal of Production Research, Vol. 43 No. 16, pp. 3321-3351. · DOI
  13. Casella, G. and Berger, R.L. (1990), Statistical Inference, Vol. 70, Duxbury Press, Belmont, CA.
  14. Cassivi, L. (2006), “Collaboration planning in a supply chain”, Supply Chain Management: An International Journal, Vol. 11 No. 3, pp. 249-258. · DOI
  15. Cervellon, M.-C. and Wernerfelt, A.-S. (2012), “Knowledge sharing among green fashion communities online Lessons for the sustainable supply chain”, Journal of Fashion Marketing and Management, Vol. 16 No. 2, pp. 176-192. · DOI
  16. Chae, B. , Yen, H.R. and Sheu, C. (2005), “Information technology and supply chain collaboration: moderating effects of existing relationships between partners”, IEEE Transactions on Engineering Management, Vol. 52 No. 4, pp. 440-448. · DOI
  17. Chen, D.Q. , Preston, D.S. and Xia, W. (2013), “Enhancing hospital supply chain performance: a relational view and empirical test”, Journal of Operations Management, Vol. 31 No. 6, pp. 391-407. · DOI
  18. Cheung, C.F. , Cheung, C.M. and Kwok, S.K. (2012), “A knowledge-based customization system for supply chain integration”, Expert Systems with Applications, Vol. 39 No. 4, pp. 3906-3924. · DOI
  19. Choi, T.Y. , Wu, Z. , Ellram, L. and Koka, B.R. (2002), “Supplier-supplier relationships and their implications for buyer-supplier relationships”, IEEE Transactions on Engineering Management, Vol. 49 No. 2, pp. 119-130. · DOI
  20. Chong, A.Y.-L. and Bai, R. (2014), “Predicting open IOS adoption in SMEs: an integrated SEM-neural network approach”, Expert Systems with Applications, Vol. 41 No. 1, pp. 221-229. · DOI
  21. Christiaanse, E. and Kumar, K. (2000), “ICT-enabled coordination of dynamic supply webs”, International Journal of Physical Distribution & Logistics Management, Vol. 30 Nos 3/4, pp. 268-285. · DOI
  22. Chuah, P. , Wong, W.P. , Ramayah, T. and Jantan, M. (2010), “Organizational context, supplier management practices and supplier performance: a case study of a multinational company in Malaysia”, Journal of Enterprise Information Management, Vol. 23 No. 6, pp. 724-758. · DOI
  23. Colicchia, C. and Strozzi, F. (2012), “Supply chain risk management: a new methodology for a systematic literature review”, Supply Chain Management: An International Journal, Vol. 17 No. 4, pp. 403-418. · DOI · Paper page
  24. Cousins, P.D. and Menguc, B. (2006), “The implications of socialization and integration in supply chain management”, Journal of Operations Management, Vol. 24 No. 5, pp. 604-620. · DOI
  25. Crook, T.R. and Combs, J.G. (2007), “Sources and consequences of bargaining power in supply chains”, Journal of Operations Management, Vol. 25 No. 2, pp. 546-555. · DOI
  26. Danes, P. (2013), “Supplier integration and company performance: a configurational view”, Omega, Vol. 41 No. 6, pp. 1029-1041. · DOI
  27. Danese, P. , Romano, P. and Formentini, M. (2013), “The impact of supply chain integration on responsiveness: the moderating effect of using an international supplier network”, Transportation Research Part E: Logistics and Transportation Review, Vol. 49 No. 1, pp. 125-140. · DOI
  28. David, R.J. and Han, S.K. (2004), “A systematic assessment of the empirical support for transaction cost economics”, Strategic Management Journal, Vol. 25 No. 1, pp. 39-58. · DOI · Paper page
  29. Davis, S.J. , Peters, G.P. and Caldeira, K. (2011), “The supply chain of CO2 emissions”, Proceedings of the National Academy of Sciences of the United States of America, Vol. 108 No. 45, pp. 18554-18559. · DOI
  30. Delbufalo, E. (2012), “Outcomes of inter-organizational trust in supply chain relationships: a systematic literature review and a meta-analysis of the empirical evidence”, Supply Chain Management: An International Journal, Vol. 17 No. 4, pp. 377-402. · DOI · Paper page
  31. Denyer, D. and Tranfield, D. (2009), “Producing a systematic review”, in Buchanan, , D. , Bryman, and A. (Eds), The Sage Handbook of Organizational Research Methods, Sage Publications, London, pp. 671-689.
  32. Diabat, A. and Simchi-Levi, D. (2009), “A carbon-capped supply chain network problem”, IEEE International Conference on Industrial Engineering and Engineering Management, Piscataway, N.J., pp. 523-527. · DOI
  33. Dwivedi, Y.K. and Mustafee, N. (2010), “Profiling research published in the Journal of Enterprise Information Management”, Journal of Enterprise Information Management, Vol. 23 No. 1, pp. 8-26. · DOI · Paper page
  34. Dwivedi, Y.K. , Kiang, M. , Lal, B. and Williams, M.D. (2008), “Profiling research published in the journal of electronic commerce research”, Journal of Electronic Commerce Research, Vol. 9 No. 2, pp. 77-91.
  35. Eriksson, P.E. (2010), “Improving construction supply chain collaboration and performance: a lean construction pilot project”, Supply Chain Management: An International Journal, Vol. 15 No. 5, pp. 394-403. · DOI
  36. Fabbe-Costes, N. and Jahre, M. (2007), “Supply chain integration improves performance: the Emperor’s new suit?”, International Journal of Physical Distribution & Logistics Management, Vol. 37 No. 10, pp. 835-855. · DOI
  37. Farooq, S. and O’Brien, C. (2012), “A technology selection framework for integrating manufacturing within a supply chain”, International Journal of Production Research, Vol. 50 No. 11, pp. 2987-3010. · DOI
  38. Flynn, B.B. , Huo, B. and Zhao, X. (2010), “The impact of supply chain integration on performance: a contingency and configuration approach”, Journal of Operations Management, Vol. 28 No. 1, pp. 58-71. · DOI · Paper page
  39. Frohlich, M.T. and Westbrook, R. (2001), “Arcs of integration: an international study of supply chain strategies”, Journal of Operations Management, Vol. 19 No. 2, pp. 185-200. · DOI
  40. Gefen, D. , Straub, D. and Boudreau, M.-C. (2000), “Structural equation modelling and regression: guidelines for research practice”, Communications of AIS, Vol. 4 No. 7, pp. 1-80.
  41. Gupta, A.K. and Govindarajan, V. (2000), “Knowledge flows within multinational corporations”, Strategic Management Journal, Vol. 21 No. 4, pp. 473-496. · DOI
  42. Hair, J.H. , Anderson, R.E. , Tatham, R.L. and Black, W.C. (1995), Multivariate Data Analysis, Prentice Hall, Englewood Cliffs, NJ.
  43. Halley, A. and Beaulieu, M. (2009), “Mastery of operational competencies in the context of supply chain management”, Supply Chain Management: An International Journal, Vol. 14 No. 1, pp. 49-63. · DOI
  44. Haug, A. (2013), “Improving the design phase through inter-organisational product knowledge models”, International Journal of Production Research, Vol. 51 No. 2, pp. 626-639. · DOI
  45. He, Q. , Ghibadian, A. and Gallear, D. (2013), “Knowledge acquisition in supply chain partnerships: the role of power”, International Journal of Production Economics, Vol. 141 No. 2, pp. 605-608. · DOI
  46. He, Y. and Lai, K.K. (2012), “Supply chain integration and service oriented transformation: evidence from Chinese equipment manufacturers”, International Journal of Production Economics, Vol. 135 No. 2, pp. 791-799. · DOI
  47. Hertz, S. (2006), “Supply chain myopia and overlapping supply chains”, Journal of Business & Industrial Marketing, Vol. 21 No. 4, pp. 208-217. · DOI
  48. Huo, Y. , Jiang, X. , Jia, F. and Li, B. (2008), A Framework and Key Techniques for Supply Chain Integration, Supply Chain, The Way to Flat Organisation, InTech, Vienna. · DOI
  49. Huo, B. (2012), “The impact of supply chain integration on company performance: an organizational capability perspective”, Supply Chain Management: An International Journal, Vol. 17 No. 6, pp. 596-610. · DOI
  50. Irani, Z. and Kamal, M.M (2014), “Intelligent systems research in the construction industry”, Expert Systems with Applications, Vol. 41 No. 4, pp. 934-950. · DOI
  51. Irani, Z. , Sharif, A. , Kamal, M.M. and Love, P.E.D. (2014), “Visualising a knowledge mapping for information systems evaluation”, Expert Systems with Applications, Vol. 41 No. 1, pp. 105-125. · DOI
  52. Jack, E.P. and Raturi, A.S. (2006), “Lessons learned from methodological triangulation in management research”, Management Research News, Vol. 29 No. 6, pp. 345-357. · DOI
  53. Kauremaa, J. , Nurmilaakso, J.M. and Tanskanen, K. (2010), “E-business enabled operational linkages: the role of RosettaNet in integrating the telecommunications supply chain”, International Journal of Production Economics, Vol. 127 No. 2, pp. 343-357. · DOI
  54. Khare, A. , Misra, R.K. , Dubey, A. , Garg, A. , Malhotra, V. , Nandan, H. and Singh, S. (2012), “Exploiting mobile technology for achieving supply chain integration in Indian retail”, Journal of Asia-Pacific Business, Vol. 13 No. 2, pp. 177-202. · DOI
  55. Kim, D.-Y. (2013), “Relationship between supply chain integration and performance”, Operations Management Research, Vol. 6 Nos 1/2, pp. 74-90. · DOI
  56. Krajewski, L. , Wei, J.C. and Tang, L.L. (2005), “Responding to schedule changes in build-to-order supply chains”, Journal of Operations Management, Vol. 23 No. 5, pp. 452-469. · DOI
  57. Lambert, D.M. , Robeson, J.F. and Stock, J.R. (1978), “An appraisal of the integrated physical distribution management concept”, International Journal of Physical Distribution and Materials Management, Vol. 9 No. 1, pp. 74-88. · DOI
  58. Lambert, D.M. and Cooper, M.C. (2000), “Issues in supply chain management”, Industrial Marketing Management, Vol. 29 No. 1, pp. 65-83. · DOI
  59. Lamming, R.C. (1993), Beyond Partnership: Strategies for Innovation and Lean Supply, Prentice Hall, London.
  60. Laosirihongthong, T. , Tan, K.-C. and Adebanjo, D. (2011), “Supply chain management in ASEAN automotive manufacturing industry”, International Journal of Logistics: Research and Applications, Vol. 14 No. 5, pp. 317-333. · DOI
  61. Lau, A.K.W. , Yam, R.C.M. and Tang, E.P.Y. (2010a), “Supply chain integration and product modularity: an empirical study of product performance for selected Hong Kong manufacturing industries”, International Journal of Operations & Production Management, Vol. 30 No. 1, pp. 20-56. · DOI
  62. Lau, A.K.W. , Tang, E. and Yam, C.M. (2010b), “Effects of supplier and customer integration on product innovation and performance: empirical evidence in Hong Kong manufacturers”, Journal of Product Innovation Management, Vol. 27 No. 5, pp. 761-777. · DOI
  63. Lee, H.L. , Padmanabhan, V. and Whang, S. (1997), “Information distortion in a supply chain: the bullwhip effect”, Management Science, Vol. 43 No. 4, pp. 546-558. · DOI
  64. Leuschner, R. , Rogers, D.S. and Charvet, F.F. (2013), “A meta-analysis of supply chain integration and firm performance”, Journal of Supply Chain Management, Vol. 49 No. 2, pp. 34-56. · DOI
  65. Li, Y. , Tarafdar, M. and Rao, S.S. (2012), “Collaborative knowledge management practices: theoretical development and empirical analysis”, International Journal of Operations & Production Management, Vol. 32 No. 4, pp. 398-422. · DOI
  66. Liu, H. , Ke, W. , Wie, K.K. and Hua, Z. (2013), “Effects of supply chain integration and market orientation on firm performance Evidence from China”, International Journal of Operations & Production Management, Vol. 33 No. 3, pp. 322-346. · DOI
  67. Lockström, M. , Schadel, J. , Harrison, N. , Moser, R. and Malhotra, M.K. (2010), “Antecedents to supplier integration in the automotive industry: a multiple-case study of foreign subsidiaries in China”, Journal of Operations Management, Vol. 28 No. 3, pp. 240-256. · DOI
  68. Lyons, D. (2003), “Back on the chain gang”, Forbes, 13 October, pp. 114-123.
  69. McCullen, P. and Towill, D. (2000), “Achieving lean supply through agile manufacturing”, Integrated Manufacturing Systems, Vol. 12 No. 7, pp. 524-533. · DOI
  70. Malhotra, N.K. (1999), Marketing Research: An Applied Orientation, 3rd ed., Prentice Hall, Upper Saddle River, NJ.
  71. Mason, R. and Lalwani, C. (2006), “Transport integration tools for supply chain management”, International Journal of Logistics: Research and Applications, Vol. 9 No. 1, pp. 57-74. · DOI
  72. Miemczyk, J. , Johnsen, T.E. and Macquet, M. (2012), “Sustainable purchasing and supply management: a structured literature review of definitions and measures at the dyad, chain and network levels”, Supply Chain Management: An International Journal, Vol. 17 No. 5, pp. 478-496. · DOI
  73. Mitra, S. and Singhal, V. (2008), “Supply chain integration and shareholder value: evidence from consortium based industry exchanges”, Journal of Operations Management, Vol. 26 No. 1, pp. 96-114. · DOI
  74. Mouritsen, J. , Skjøtt-Larsen, T. and Kotzab, H. (2003), “Exploring the contours of supply chain management”, Integrated Manufacturing Systems, Vol. 14 No. 8, pp. 686-695. · DOI
  75. Mukhtar, M. (2014), “Issues in the design and evaluation of e-supply chains”, In Handbook of Strategic e-Business Management, Springer Berlin Heidelberg, New York, pp. 255-279. · DOI
  76. Mungan, D. , Yu, J. and Sarker, B.R. (2010), “Manufacturing lotsizing, procurement and delivery schedules over a finite planning horizon”, International Journal of Production Research, Vol. 48 No. 12, pp. 3619-3636. · DOI
  77. Narasimhan, R. , Swink, M. and Viswanathan, S. (2010), “On decisions for integration implementation: an examination of complementarities between product-process technology integration and supply chain integration”, Decision Sciences, Vol. 41 No. 2, pp. 355-372. · DOI
  78. Nguyen, H.-O. (2013), “Critical factors in e-business adoption: evidence from Australian transport and logistics companies”, International Journal of Production Economics, Vol. 146 No. 1, 300-312. · DOI
  79. Nurmilaakso, J.-M. (2008), “Adoption of e-business functions and migration from EDI-based to XML-based e-business frameworks in supply chain integration”, International Journal of Production Economics, Vol. 113 No. 2, pp. 732-733. · DOI
  80. Pagell, M. (2004), “Understanding the factors that enable and inhibit the integration of operations, purchasing and logistics”, Journal of Operations Management, Vol. 22 No. 5, pp. 459-487. · DOI
  81. Parente, D.H. , Lee, P.D. , Ishman, M.D. and Roth, A.V. (2008), “Marketing and supply chain management: a collaborative research agenda”, Journal of Business & Industrial Marketing, Vol. 23 No. 8, pp. 520-528. · DOI
  82. Parnaby, J. (1979), “Concept of a manufacturing system”, International Journal of Production Research, Vol. 17 No. 2, pp. 123-135. · DOI
  83. Paulraj, A. , Lado, A. and Chen, I. (2008), “Inter-organizational communication as a relational competency: antecedents and performance outcomes in collaborative buyer–supplier relationships”, Journal of Operations Management, Vol. 26 No. 1, pp. 45-64. · DOI
  84. Petrick, I.J. and Echols, A.E. (2004), “Technology roadmapping in review: a tool for making sustainable new product development decisions”, Technological Forecasting & Social Change, Vol. 71 Nos 1/2, pp. 81-100. · DOI
  85. Prajogo, D. and Olhager, J. (2012), “Supply chain integration and performance: the effects of long-term relationships, information technology and sharing, and logistics integration”, International Journal of Production Economics, Vol. 135 No. 1, pp. 514-522. · DOI
  86. Quesada, G. , Rachamadugu, R. , Gonzalez, M. and Martinez, J.L. (2008), “Linking order winning and external supply chain integration strategies”, Supply Chain Management: An International Journal, Vol. 13 No. 4, pp. 296-303. · DOI
  87. Ragatz, G.L. , Handfield, R.B. and Petersen, K.J. (2002), “Benefits associated with supplier integration into new product development under conditions of technology uncertainty”, Journal of Business Research, Vol. 55 No. 5, pp. 389-400. · DOI
  88. Ramanathana, U. and Gunasekaranb, A. (2012), “Supply chain collaboration: impact of success in long-term partnership”, International Journal of Production Economics, Vol. 147, Part B, pp. 252-259.
  89. Reeves, S. , Albert, M. , Kuper, A. and Hodges, B.D. (2008), “Qualitative research: why use theories in qualitative research?”, British Medical Journal, Vol. 337 No. 7670, pp. 631-634.
  90. Richey, R.G. , Chen, H. , Upreti, R. , Fawcett, S.E. and Adams, F.G. (2009), “The moderating role of barriers on the relationship between drivers to supply chain integration and firm performance”, International Journal of Physical Distribution & Logistics Management, Vol. 39 No. 10, pp. 826-840. · DOI
  91. Schubert, P. and Legner, C. (2011), “B2B integration in global supply chains: an identification of technical integration scenarios”, Journal of Strategic Information Systems, Vol. 20 No. 3, pp. 250-267. · DOI
  92. Seuring, S. and Gold, S. (2012), “Conducting content-analysis based literature reviews in supply chain management”, Supply Chain Management: An International Journal, Vol. 17 No. 5, pp. 544-555. · DOI
  93. Shao, X.-F. (2013), “Supply chain characteristics and disruption mitigation capability: an empirical investigation in China”, International Journal of Logistics Research and Applications, Vol. 16 No. 4, pp. 277-295. · DOI
  94. Shou, Y. , Feng, Y. , Zheng, J. , Wang, G. and Yeboah, N.E. (2013), “Power source and its effect on customer – supplier relationships: an empirical study in Yangtze River Delta”, International Journal of Production Economics, Vol. 146 No. 1, pp. 118-128. · DOI
  95. Simatupang, T.M. and Sridharan, R. (2008), “Design for supply chain collaboration”, The International Journal of Logistics Management, Vol. 13 No. 1, pp. 15-30. · DOI
  96. Simchi-Levi, D. , Kaminsky, P. and Simchi-Levi, E. (2003), Designing and Managing the Supply Chain, 2nd ed., McGraw-Hill, Boston, MA.
  97. So, S. and Sun, H. (2011), “An extension of IDT in examining the relationship between electronic-enabled supply chain integration and the adoption of lean production”, International Journal of Production Research, Vol. 49 No. 2, pp. 447-466. · DOI
  98. Spralls, S.A. , Hunt, S.D. and Wilcox, J.B. (2011), “Extranet use and building relationship capital in interfirm distribution networks: the role of extranet capability”, Journal of Retailing, Vol. 87 No. 1, pp. 59-74. · DOI
  99. Stuart, F.I. , Verville, J. and Taskin, N. (2012), “Trust in buyer-supplier relationships: supplier competency, interpersonal relationships and performance outcomes”, Journal of Enterprise Information Management, Vol. 25 No. 4, pp. 392-412. · DOI
  100. Swink, M. , Narasimhan, R. and Wang, C. (2007), “Managing beyond the factory walls: effects of four types of strategic integration on manufacturing plant performance”, Journal of Operations Management, Vol. 25 No. 1, pp. 148-164. · DOI
  101. Tang, D. and Qian, X. (2008), “Product lifecycle management for automotive development focusing on supplier integration”, Computers in Industry, Vol. 59 Nos 2/3, pp. 288-295. · DOI
  102. Themistocleous, M. and Irani, Z. and Love, P.E.D (2004), “Evaluating the integration of supply chain information systems: a case study”, European Journal of Operational Research, Vol. 159 No. 2, pp. 393-405. · DOI
  103. Toktay, L.B. , Wein, L.M. and Zenios, S.A. (2000), “Inventory management of remanufacturable products”, Management Science, Vol. 46 No. 11, pp. 1412-1426. · DOI
  104. Tranfield, D. , Denyer, D. and Smart, P. (2003), “Towards a methodology for developing evidence-informed management knowledge by means of systematic review”, British Journal of Management, Vol. 14 No. 3, pp. 207-222. · DOI · Paper page
  105. Trkman, P. , Štemberger, M.I. , Jaklic, J. and Groznik, A. (2007), “Process approach to supply chain integration”, Supply Chain Management: An International Journal, Vol. 12 No. 2, pp. 116-128. · DOI
  106. Vachon, S. and Klassen, R.D. (2006), “Extending green practices across the supply chain: the impact of upstream and downstream integration”, International Journal of Operations & Production Management, Vol. 26 No. 7, pp. 795-821. · DOI
  107. van der Vaart, T. and van Donk, D.P. (2008), “A critical review of the survey-based research in supply chain integration”, International Journal of Production Economics, Vol. 111 No. 1, pp. 42-55. · DOI
  108. van der Vaart, T. , van Donk, D.P. , Gimenez, C. and Sierra, V. (2012), “Modelling the integration-performance relationship: collaborative practices, enablers and contextual factors”, International Journal of Operations & Production Management, Vol. 32 No. 9, pp. 1043-1074. · DOI
  109. van Donk, D.P. and van der Vaart, T. (2005), “A case of shared resources, uncertainty and supply chain integration in the process industry”, International Journal of Production Economics, Vol. 96 No. 1, pp. 97-108. · DOI
  110. Vanpoucke, E. , Boyer, K.K. and Vereecke, A. (2009), “Supply chain information flow strategies: an empirical taxonomy”, International Journal of Operations & Production Management, Vol. 29 No. 12, pp. 1213-1241. · DOI
  111. Vickery, S.K. , Jayaram, J. , Droge, C. and Calantone, R. (2003), “The effects of an integrative supply chain strategy on customer service and financial performance: an analysis of direct versus indirect relationships”, Journal of Operations Management, Vol. 21 No. 5, pp. 523-539. · DOI
  112. Vijayasarathy, L.R. (2010), “Supply integration: an investigation of its multi-dimensionality and relational antecedents”, International Journal of Production Economics, Vol. 124 No. 2, pp. 489-505. · DOI
  113. Wang, M. , Liu, J. , Wang, H. , Cheung, W.K. and Xie, X. (2008), “On-demand e-supply chain integration: a multi-agent constraint-based approach”, Expert Systems with Applications, Vol. 34 No. 4, pp. 2683-2692. · DOI
  114. Wang, W.Y.C. and Chan, H.K. (2010), “Virtual organization for supply chain integration: two cases in the textile and fashion retailing industry”, International Journal of Production Economics, Vol. 127 No. 2, pp. 333-342. · DOI
  115. Wolfswinkel, J.F. , Furtmueller, E. and Wilderom, C.P.M. (2013), “Using grounded theory as a method for rigorously reviewing literature”, European Journal of Information Systems, Vol. 22 No. 1, pp. 45-55. · DOI
  116. Wong, C.W.Y. , Boon-itt, S. and Wong, C.Y. (2011), “The contingency effects of environmental uncertainty on the relationship between supply chain integration and operational performance”, Journal of Operations Management, Vol. 29 No. 6, pp. 604-615. · DOI
  117. Wong, C.W.Y. , Wong, C.Y. and Boon-itt, S. (2013), “The combined effects of internal and external supply chain integration on product innovation”, International Journal of Production Economics, Vol. 146 No. 2, pp. 566-574. · DOI
  118. Woo, J. , Kulvatunyou, B. and Cho, H. (2007), “Allocation of manufacturers through internet-based collaboration for distributed process planning”, International Journal of Production Research, Vol. 46 No. 7, pp. 1991-2007. · DOI
  119. Wu, G.-G. (2013), “The influence of green supply chain integration and environmental uncertainty on green innovation in Taiwan’s IT industry”, Supply Chain Management: An International Journal, Vol. 18 No. 5, pp. 539-552. · DOI
  120. Xu, H.Q. , Ristic, M. , Besant, C.B. and Pradoux, C. (2005), “A web-based system for manufacturing co-ordination in complex supply networks”, International Journal of Production Research, Vol. 43 No. 10, pp. 2049-2070. · DOI
  121. Yang, J. (2013), “Harnessing value in knowledge management for performance in buyer–supplier collaboration”, International Journal of Production Research, Vol. 51 No. 7, pp. 1984-1991. · DOI
  122. Yao, J. (2010), “Decision optimization analysis on supply chain resource integration in fourth party logistics”, Journal of Manufacturing Systems, Vol. 29 No. 4, pp. 121-129. · DOI
  123. Yu, W. , Jacobs, M.A. , Salisbury, W.D. and Enns, H. (2013), “The effects of supply chain integration on customer satisfaction and financial performance: an organizational learning perspective”, International Journal of Production Economics, Vol. 146 No. 1, pp. 346-358. · DOI
  124. Yuan, X.-M. , Low, J.M.W. and Yeo, W.M. (2012), “A network prototype for integrated production distribution planning with non-multi-functional plants”, International Journal of Production Research, Vol. 50 No. 4, pp. 1097-1113. · DOI
  125. Zahay, D.L. and Handfield, R.B. (2004), “The role of learning and technical capabilities in prediction adoption of B2B technologies”, Industrial Marketing Management, Vol. 33 No. 7, pp. 627-641. · DOI
  126. Zhang, M. and Huo, B. (2013), “The impact of dependence and trust on supply chain integration”, International Journal of Physical Distribution & Logistics Management, Vol. 43 No. 7, pp. 544-563. · DOI
  127. Zhao, X. , Huo, B. , Flynn, B.B. and Yeung, J. (2008), “The impact of power and relationship commitment on the integration between manufacturers and customers in a supply chain”, Journal of Operations Management, Vol. 26 No. 3, pp. 368-388. · DOI
  128. Vokurka, R.J. and O’Leary-Kelly, S.W. (2000), “A review of empirical research on manufacturing flexibility”, Journal of Operations Management, Vol. 18 No. 4, pp. 485-501. · DOI

Cited by

Sorted by citations

Metadata

Authors
Mustafa Kamal, M., & Irani, Z.
Affiliations
Brunel University of London (GB)
Venue
Supply Chain Management: An International Journal
Publisher
Emerald
Published
2014-09-02
Volume
19
Issue
5/6
Pages
523-557
ISSN
1359-8546 (ISSN-L)
OpenAlex
W2153301688
Cited by
139
References
2
Citations by year
2026: 3 · 2025: 6 · 2024: 9 · 2023: 15 · 2022: 20 · 2021: 14 · 2020: 16 · 2019: 21 · 2018: 12 · 2017: 12 · 2016: 7 · 2015: 4
FWCI
4.46
Type
journal article
Language
en
Open access
Locations
  • Supply Chain Management An International Journal (publishedVersion)
  • Bradford Scholars (University of Bradford) (submittedVersion)
  • Brunel University Research Archive (BURA) (Brunel University London) (submittedVersion)
Topics
  • Social Sciences › Business, Management and Accounting › Management Information Systems › Quality and Supply Management
  • Social Sciences › Business, Management and Accounting › Strategy and Management › Sustainable Supply Chain Management
  • Social Sciences › Decision Sciences › Management Science and Operations Research › Supply Chain and Inventory Management
Keywords
supply chain integration, supply chain management, driving and inhibiting factors, supply chain collaboration, research trends, research quality, research gaps, Scopus

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review