The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Optimum semiconductors for high-power electronics
Abstract
Elemental and compound semiconductors, including wide-bandgap semiconductors, are critically examined for high-power electronic applications in terms of several parameters. On the basis of an analysis applicable to a wide range of semiconducting materials and by using the available measured physical parameters, it is shown that wide-bandgap semiconductors such as SiC and diamond could offer significant advantages compared to either silicon or group III-V compound semiconductors for these applications. The analysis uses peak electric field strength at avalanche breakdown as a critical material parameter for evaluating the quality of a semiconducting material for high-power electronics. Theoretical calculations show improvement by orders of magnitude in the on-resistance, twentyfold improvement in the maximum frequency of operation, and potential for successful operation at temperatures beyond 600 degrees C for diamond high-power devices. New figures of merit for power-handling capability that emphasize electrical and thermal conductivities of the material are derived and are applied to various semiconducting materials. It is shown that an improvement in power-handling capabilities of semiconductor devices by three orders of magnitude is feasible by replacing silicon with silicon carbide; improvement in power-handling capability by six orders of magnitude is projected for diamond-based devices.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physics of Semiconductor Devices
Sze, S. M., & Ng, K. K. (2006) · doi:10.1002/0470068329 · Cited by 14,627
Irreversibility and heat generation in the computing process
Landauer, R. (1961) · IBM Journal of Research and Development · doi:10.1147/rd.53.0183 · Cited by 4,980
Irreversibility and heat generation in the computing process
Landauer, R. (2000) · IBM Journal of Research and Development · doi:10.1147/rd.441.0261 · Cited by 2,585
Low-Pressure, Metastable Growth of Diamond and "Diamondlike" Phases
Angus, J. C., & Hayman, C. C. (1988) · Science · doi:10.1126/science.241.4868.913 · Cited by 1,574
Semiconductors for high-voltage, vertical channel field-effect transistors
Baliga, B. J. (1982) · Journal of Applied Physics · doi:10.1063/1.331646 · Cited by 470
Self-citationPhysical limitations on frequency and power parameters of transistors
Johnson, E. (2005) · IRE International Convention Record · doi:10.1109/irecon.1965.1147520 · Cited by 449
High-field transport in wide-band-gap semiconductors
Ferry, D. K. (1975) · Physical Review B · doi:10.1103/physrevb.12.2361 · Cited by 264
Growth of diamond thin films by electron assisted chemical vapor deposition
Sawabe, A., & Inuzuka, T. (1985) · Applied Physics Letters · doi:10.1063/1.95715 · Cited by 254
The insulated gate rectifier (IGR): A new power switching device
Baliga, B. J., Adler, M. S., Gray, P. V., Love, R. P., & Zommer, N. (1982) · 1982 International Electron Devices Meeting · doi:10.1109/iedm.1982.190269 · Cited by 203
Self-citationFigure of merit for semiconductors for high-speed switches
Keyes, R. W. (1972) · Proceedings of the IEEE · doi:10.1109/proc.1972.8593 · Cited by 160
Breakdown field in vapor-grown silicon carbide p-n junctions
von Muench, W., & Pfaffeneder, I. (1977) · Journal of Applied Physics · doi:10.1063/1.323509 · Cited by 111
Silicon Carbide—A high temperature semiconductor
Pincherle, L. (1961) · Solid-State Electronics · doi:10.1016/0038-1101(61)90059-4 · Cited by 87
Cited by
Comparison of 6H-SiC, 3C-SiC, and Si for power devices
Bhatnagar, M., & Baliga, B. J. (1993) · IEEE Transactions on Electron Devices · doi:10.1109/16.199372 · Cited by 1,120
Self-citationSilicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537
SiC devices: physics and numerical simulation
Ruff, M., Mitlehner, H., & Helbig, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.293319 · Cited by 508
Wide bandgap compound semiconductors for superior high-voltage unipolar power devices
Chow, T. P., & Tyagi, R. (1994) · IEEE Transactions on Electron Devices · doi:10.1109/16.297751 · Cited by 487
Degradation of hexagonal silicon-carbide-based bipolar devices
Skowronski, M., & Ha, S. (2006) · Journal of Applied Physics · doi:10.1063/1.2159578 · Cited by 474
Metadata
- Authors
- Shenai, K., Scott, R. S., & Baliga, B. J.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 1989-09
- Volume
- 36
- Issue
- 9
- Pages
- 1811-1823
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W1998370272
- Cited by
- 617
- References
- 12
- FWCI
- 13.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.