The DOI matches its Crossref record.
Choice of clip levels for beam width measurements using knife-edge techniques
Abstract
The scanning knife-edge technique provides a method for measuring the width of an optical beam having an arbitrary or irregular transverse profile. To implement this method, however, it is necessary to select both a clip level and a scale factor for converting the measured clip width into an effective width of the laser beam. The authors show that the preferred clip level for beam width measurements using this technique should be chosen in the range between 8.5% and about 11.6%. With a suitably matched clip level and scale factor within this range, the conversion from measured clip width to standard deviation can be made exactly accurate for TEM/sub 00/ Gaussian beams, and the conversion factor will become only slightly inaccurate for a wide range of other higher-order or poorer-quality beam profiles.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Generation of Coherent X-rays in the Water Window Using 5-Femtosecond Laser Pulses
Spielmann, C., Burnett, N. H., Sartania, S., Koppitsch, R., Schnürer, M., Kan, C., Lenzner, M., Wobrauschek, P., & Krausz, F. (1997) · Science · doi:10.1126/science.278.5338.661 · Cited by 718
Creation and detection of optical modes with spatial light modulators
Forbes, A., Dudley, A., & McLaren, M. (2016) · Advances in Optics and Photonics · doi:10.1364/aop.8.000200 · Cited by 697
Laser-induced breakdown in aqueous media
Kennedy, P. K., Hammer, D. X., & Rockwell, B. A. (1997) · Progress in Quantum Electronics · doi:10.1016/s0079-6727(97)00002-5 · Cited by 324
Vogel, A., Nahen, K., Theisen, D., & Noack, J. (1996) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.577307 · Cited by 275
Experimental investigation of ultrashort pulse laser-induced breakdown thresholds in aqueous media
Hammer, D. X., Thomas, R. J., Noojin, G. D., Rockwell, B. A., Kennedy, P. K., & Roach, W. P. (1996) · IEEE Journal of Quantum Electronics · doi:10.1109/3.488842 · Cited by 112
Shielding properties of laser-induced breakdown in water for pulse durations from 5 ns to 125 fs
Hammer, D. X., Jansen, E. D., Frenz, M., Noojin, G. D., Thomas, R. J., Noack, J., Vogel, A., Rockwell, B. A., & Welch, A. J. (1997) · Applied Optics · doi:10.1364/ao.36.005630 · Cited by 97
Terahertz Modulator Based on Vertically Coupled Fano Metamaterial
Tran, T. A. P., & Bolivar, P. H. (2018) · IEEE Transactions on Terahertz Science and Technology · doi:10.1109/tthz.2018.2851919 · Cited by 17
“The THz focus spot diameter (10%–90% intensity) measured with a knife-edge method [22] was approximately 2 mm at 500 GHz, much smaller than the 8 × 8 mm2 split-ring array area to avoid the boundary effect and to ease alignment.”
Method
Metadata
- Authors
- Siegman, A. E., Sasnett, M. W., & Johnston, T. F.
- Venue
- IEEE Journal of Quantum Electronics
- Published
- 1991-04
- Volume
- 27
- Issue
- 4
- Pages
- 1098-1104
- ISSN
- 0018-9197 (ISSN-L)
- OpenAlex
- W2135753442
- Cited by
- 212
- References
- 0
- FWCI
- 5.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.