The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Techniques for calibration of the scale factor and image center for high accuracy 3-D machine vision metrology
Abstract
Techniques are described for calibrating certain intrinsic camera parameters for machine vision. The parameters to be calibrated are the horizontal scale factor, and the image center. The scale factor calibration uses a one-dimensional fast Fourier transform and is accurate and efficient. It also permits the use of only one coplanar set of calibration points for general camera calibration. Three groups of techniques for center calibration are presented: Group I requires using a laser and a four-degree-of-freedom adjustment of its orientation, but is simplest in concept and is accurate and reproducible; Group II is simple to perform, but is less accurate than the other two; and the most general, Group II, is accurate and efficient, but requires a good calibration plate and accurate image feature extraction of calibration points. Group II is recommended most highly for machine vision applications. Results of experiments are presented and compared with theoretical predictions. Accuracy and reproducibility of the calibrated parameters are reported, as well as the improvement in actual 3-D measurement due to center calibration.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tsai, R. (1987) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1987.1087109 · Cited by 5,838
Self-citationA system for extracting three-dimensional measurements from a stereo pair of TV cameras
Yakimovsky, Y., & Cunningham, R. (1978) · Computer Graphics and Image Processing · doi:10.1016/0146-664x(78)90112-0 · Cited by 306
Decomposition of transformation matrices for robot vision
Ganapathy, S. (2005) · Proceedings. 1984 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1984.1087163 · Cited by 246
Three-dimensional data input by tablet
Sutherland, I. E. (1974) · Proceedings of the IEEE · doi:10.1109/proc.1974.9449 · Cited by 225
CALIBRATION OF CLOSE-RANGE PHOTOGRAMMETRIC SYSTEMS: MATHEMATICAL FORMULATION.
Faig, W. (1975) · Photogrammetric Engineering & Remote Sensing · Cited by 220
Camera models based on data from two calibration planes
Martins, H. A., Birk, J. R., & Kelley, R. B. (1981) · Computer Graphics and Image Processing · doi:10.1016/0146-664x(81)90024-1 · Cited by 199
Moravec, H. (1981) · Medical Entomology and Zoology · Cited by 116
O'Kennedy, B. (2002) · SUNScholar (Stellenbosch University) · Cited by 76
Cited by
Azuma, R. T. (1997) · Presence: Teleoperators and Virtual Environments · doi:10.1162/pres.1997.6.4.355 · Cited by 10,121
Camera calibration with distortion models and accuracy evaluation
Weng, J., Cohen, P., & Herniou, M. (1992) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.159901 · Cited by 1,757
Plenoptic modeling: an image-based rendering system
McMillan, L., & Bishop, G. (1995) · Proceedings of the 22nd annual conference on Computer graphics and interactive techniques - SIGGRAPH '95 · doi:10.1145/218380.218398 · Cited by 1,262
Fast and globally convergent pose estimation from video images
Lu, C.-P., Hager, G. D., & Mjolsness, E. (2000) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.862199 · Cited by 882
Geometric camera calibration using circular control points
Heikkila, J. (2000) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.879788 · Cited by 872
Using vanishing points for camera calibration
Caprile, B., & Torre, V. (1990) · International Journal of Computer Vision · doi:10.1007/bf00127813 · Cited by 711
Straight lines have to be straight
Devernay, F., & Faugeras, O. (2001) · Machine Vision and Applications · doi:10.1007/pl00013269 · Cited by 690
Linear N-point camera pose determination
Quan, L., & Lan, Z. (1999) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.784291 · Cited by 635
Digital camera self-calibration
Fraser, C. S. (1997) · ISPRS Journal of Photogrammetry and Remote Sensing · doi:10.1016/s0924-2716(97)00005-1 · Cited by 595
On plane-based camera calibration: A general algorithm, singularities, applications
Sturm, P. F., & Maybank, S. J. (2003) · Proceedings. 1999 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (Cat. No PR00149) · doi:10.1109/cvpr.1999.786974 · Cited by 545
A comparative review of camera calibrating methods with accuracy evaluation
Salvi, J., Armangué, X., & Batlle, J. (2002) · Pattern Recognition · doi:10.1016/s0031-3203(01)00126-1 · Cited by 497
Linear pose estimation from points or lines
Ansar, A., & Daniilidis, K. (2003) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2003.1195992 · Cited by 434
Improving static and dynamic registration in an optical see-through HMD
Azuma, R., & Bishop, G. (1994) · Proceedings of the 21st annual conference on Computer graphics and interactive techniques - SIGGRAPH '94 · doi:10.1145/192161.192199 · Cited by 390
Implicit and explicit camera calibration: theory and experiments
Wei, G.-Q., & Ma, S. D. (1994) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.291450 · Cited by 314
Robust asymptotically stable visual servoing of planar robots
Kelly, R. (1996) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.538980 · Cited by 305
Accurate technique for complete geometric calibration of cone‐beam computed tomography systems
Cho, Y., Moseley, D. J., Siewerdsen, J. H., & Jaffray, D. A. (2005) · Medical Physics · doi:10.1118/1.1869652 · Cited by 297
Metadata
- Authors
- Lenz, R. K., & Tsai, R. Y.
- Venue
- IEEE Transactions on Pattern Analysis and Machine Intelligence
- Published
- 1988-09
- Volume
- 10
- Issue
- 5
- Pages
- 713-720
- ISSN
- 0162-8828 (ISSN-L)
- 2160-9292
- OpenAlex
- W1981673675
- Cited by
- 557
- References
- 8
- FWCI
- 19.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.