The DOI matches its Crossref record.
Robust independent joint controller design for industrial robot manipulators
Abstract
A novel approach is presented for the design of simple robust independent joint controllers for industrial robot manipulators. In this approach, each joint actuator is treated as a simple inertial system plus a disturbance torque representing all the unmodeled dynamics. By a very simple algorithm, the disturbance is instantly estimated and rejected, thus allowing a simple proportional-derivative (PD) control scheme to be used. The stability of the proposed control law is analyzed. Experimental evaluations of the controller on a microcomputer-controlled PUMA 560 arm were performed. It is shown that the control scheme is simple and practical and that it can be easily implemented on an industrial manipulator presently in use.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A New Adaptive Sliding-Mode Control Scheme for Application to Robot Manipulators
Baek, J., Jin, M., & Han, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2522386 · Cited by 531
Van, M., Ge, S. S., & Ren, H. (2017) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2016.2555307 · Cited by 486
Jin, M., Lee, J., Chang, P. H., & Choi, C. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024097 · Cited by 428
Adaptive Integral Sliding Mode Control With Time-Delay Estimation for Robot Manipulators
Lee, J., Chang, P. H., & Jin, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2698416 · Cited by 318
Umeno, T., Kaneko, T., & Hori, Y. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.238016 · Cited by 284
Robust Tracking Under Nonlinear Friction Using Time-Delay Control With Internal Model
Cho, G. R., Chang, P. H., Park, S. H., & Jin, M. (2009) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2008.2007650 · Cited by 89
Wang, Y., Peng, J., Zhu, K., Chen, B., & Wu, H. (2020) · International Journal of Systems Science · doi:10.1080/00207721.2020.1808732 · Cited by 21
Taefi, M., & Khosravi, M. A. (2024) · International Journal of Robust and Nonlinear Control · doi:10.1002/rnc.7379 · Cited by 13
Recent Advances in Robotics and Intelligent Robots Applications
Song, Q., & Zhao, Q. (2024) · Applied Sciences · doi:10.3390/app14104279 · Cited by 10
Time-Delay Estimation Improves Active Disturbance Rejection Control for Time-Delay Nonlinear Systems
Nahri, S. N. F., Du, S., van Wyk, B. J., & Nyasulu, T. D. (2024) · Machines · doi:10.3390/machines12080552 · Cited by 7
Fatima Nahri, S. N., Du, S., van Wyk, B. J., Kayode Ajayi, O., Nyasulu, T. D., & Yu, H. (2025) · 2025 33rd Southern African Universities Power Engineering Conference (SAUPEC) · doi:10.1109/saupec65723.2025.10944363 · Cited by 3
Time Delay Control for Robot Manipulators With Prescribed Performance
Yang, P., Zhang, H., Meng, X., & Li, Q. (2025) · IEEE Control Systems Letters · doi:10.1109/lcsys.2025.3601662 · Cited by 2
Metadata
- Authors
- Hsia, T. C. S., Lasky, T. A., & Guo, Z.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 1991
- Volume
- 38
- Issue
- 1
- Pages
- 21-25
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2167054844
- Cited by
- 240
- References
- 0
- FWCI
- 11.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.