The DOI matches its Crossref record.
Performance trends in high-end processors
Abstract
Based on a first order cycle time model performance trends and limits are projected for both bipolar and CMOS processors. The key in identifying trends is the understanding of the pivotal factors at any given stage of technology progression. One such parameter is the physical area of the processor. In coming technologies there will be opposite demands placed on the system's area stemming from a need to reduce the proportion of interconnection capacitance and to send signals across the processor. Contrary to the usual perception, delays resulting from wiring capacitance decrease if processor area increases, while the minimization of signal travel times favors reducing area. The system size tradeoff in the case of bipolar processors is primarily determined by power density, while CMOS processor sizes are determined by wirability requirements. To achieve the full potential of CMOS, interconnections will have to be carefully planned. The performance limits of bipolar and room temperature CMOS uniprocessors are shown to be very similar. The highest performance technology on the horizon is liquid nitrogen temperature CMOS. Alternate technologies, based on III-V compound devices, or more exotic quantum structures, are not expected to play a role in future general-purpose high-end systems.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fundamentals of Modern VLSI Devices
Taur, Y., & Ning, T. H. (2009) · Cambridge University Press eBooks · doi:10.1017/cbo9781139195065 · Cited by 2,922
Rationale and challenges for optical interconnects to electronic chips
Miller, D. A. B. (2000) · Proceedings of the IEEE · doi:10.1109/5.867687 · Cited by 1,189
Banerjee, K., Souri, S. J., Kapur, P., & Saraswat, K. C. (2001) · Proceedings of the IEEE · doi:10.1109/5.929647 · Cited by 1,028
Interconnect limits on gigascale integration (GSI) in the 21st century
Davis, J. A., Venkatesan, R., Kaloyeros, A., Beylansky, M., Souri, S. J., Banerjee, K., Saraswat, K. C., Rahman, A., Reif, R., & Meindl, J. D. (2001) · Proceedings of the IEEE · doi:10.1109/5.915376 · Cited by 512
Wong, H.-S. P., Frank, D. J., Solomon, P. M., Wann, C. H. J., & Welser, J. J. (1999) · Proceedings of the IEEE · doi:10.1109/5.752515 · Cited by 444
CMOS scaling for high performance and low power-the next ten years
Davari, B., Dennard, R. H., & Shahidi, G. G. (1995) · Proceedings of the IEEE · doi:10.1109/5.371968 · Cited by 386
When are transmission-line effects important for on-chip interconnections?
Deutsch, A., Kopcsay, G. V., Restle, P. J., Smith, H. H., Katopis, G., Becker, W. D., Coteus, P. W., Surovic, C. W., Rubin, B. J., Dunne, R. P., et al. (1997) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/22.641781 · Cited by 383
Self-citationA stochastic wire-length distribution for gigascale integration (GSI). I. Derivation and validation
Davis, J. A., De, V. K., & Meindl, J. D. (1998) · IEEE Transactions on Electron Devices · doi:10.1109/16.661219 · Cited by 329
Getting to the bottom of deep submicron
Sylvester, D., & Keutzer, K. (1998) · Proceedings of the 1998 IEEE/ACM international conference on Computer-aided design - ICCAD '98 · doi:10.1145/288548.288614 · Cited by 281
Lanzerotti, M. Y., Fiorenza, G., & Rand, R. A. (2005) · IBM Journal of Research and Development · doi:10.1147/rd.494.0777 · Cited by 47
“These models include a cycle-time model [55], SUSPENS [4, 83], AIM [84], GENESYS [85], RIPE [86], BACPAC [87, 88], and GTX [89].”
BackgroundMethod
Metadata
- Authors
- Sai-Halasz, G. A.
- Venue
- Proceedings of the IEEE
- Published
- 1995
- Volume
- 83
- Issue
- 1
- Pages
- 20-36
- ISSN
- 0018-9219 (ISSN-L)
- OpenAlex
- W2024625835
- Cited by
- 222
- References
- 0
- FWCI
- 25.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.