The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Analysis of direct torque control in permanent magnet synchronous motor drives
Abstract
This paper describes an investigation of direct torque control (DTC) for permanent magnet synchronous motor (PMSM) drives. It is mathematically proven that the increase of electromagnetic torque in a permanent magnet motor is proportional to the increase of the angle between the stator and rotor flux linkages, and, therefore, the fast torque response can be obtained by adjusting the rotating speed of the stator flux linkage as fast as possible. It is also shown that the zero voltage vectors should not be used, and stator flux linkage should be kept moving with respect to the rotor flux linkage all the time. The implementation of DTC in the permanent magnet motor is discussed, and it is found that for DTC using available digital signal processors (DSPs), it is advantageous to have a motor with a high ratio of the rated stator flux linkage to stator voltage. The simulation results verify the proposed control and also show that the torque response under DTC is much faster than the one under current control.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor
Takahashi, I., & Noguchi, T. (1986) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1986.4504799 · Cited by 3,407
Direct torque control of permanent magnet drives
French, C., & Acarnley, P. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530302 · Cited by 205
Cited by
Direct Torque Control of PWM Inverter-Fed AC Motors—A Survey
Buja, G. S., & Kazmierkowski, M. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.831717 · Cited by 1,267
Zhang, Y., & Zhu, J. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2059047 · Cited by 389
Foo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030820 · Cited by 367
Self-citationTang, L., Zhong, L., Rahman, M. F., & Hu, Y. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823170 · Cited by 365
Self-citationRahman, M. F., Zhong, L., & Lim, K. W. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.738985 · Cited by 298
Self-citationRahman, M. F., Zhong, L., & Lim, K. W. (2002) · IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting · doi:10.1109/ias.1997.643010 · Cited by 259
Self-citationFoo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030815 · Cited by 198
Self-citationFoo, G. H. B., & Rahman, M. F. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2036354 · Cited by 190
Self-citation
Metadata
- Authors
- Zhong, L., Rahman, M. F., Hu, W. Y., & Lim, K. W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1997-05
- Volume
- 12
- Issue
- 3
- Pages
- 528-536
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2126620870
- Cited by
- 951
- References
- 2
- FWCI
- 1.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.