CoChat

A Method for Validating CubeSat Satellite EPS Through Power Budget Analysis Aligned With Mission Requirements

Open access
Acero, Ignacio F., Diaz, Jonathan, Hurtado-Velasco, Ronald, Bautista, Sergio Ramiro Gonzalez, Rincón, Sonia, Hernández, Francisco L., Rodriguez-Ferreira, Julian, Gonzalez-Llorente, Jesus · 2023 · IEEE Access

The DOI matches its Crossref record; 18 of the 21 references it cites were found in a registry or an index; 2 of the 16 sources its claims cite were checked for support.

Abstract

The approach determines the power and energy for the operational modes and scenarios and evaluates the battery depth of discharge and charge/discharge cycles.

Overview

CoChat Summary

## TL;DR

The paper proposes a five-step method to validate a CubeSat electrical power system (EPS) by linking power-budget analysis to mission requirements, modes, and scenarios. In the LEOPAR 3U CubeSat case study, the method found that the EPS can meet mission power and energy needs, with a selected battery depth of discharge (DoD) of 20%.

## Key findings

  • The proposed method uses five steps: preliminary power budget, power/energy of operation modes, scenario energy, indicator definition, and EPS validation.
  • For the LEOPAR 3U CubeSat case study, the orbital period was 95.50 min (1.59 h), split into 47.75 min sun time and 47.75 min eclipse time; MATLAB simulations estimated energy generation of 26.19 Wh/orbit with the satellite facing nadir and 48.01 Wh/orbit with the panels facing the sun.
  • The platform battery bank is a Li-Ion 2S3P bank with maximum voltage 8.26 V and capacity 3.8 Ah (30 Wh); the paper states a minimum required capacity of 23.89 Wh and a 20% DoD gives a battery life of 5.4 years.
  • In validation, the maximum power required across operating modes was 18.36 W, which the VBATT bus can supply up to 30 W; the release scenario consumed 13.28 Wh and corresponded to 49.19% battery discharge.

## Methods

  • Design: a five-step EPS validation method grounded in power budget analysis and aligned with mission definition, architecture, and high-level requirements.
  • Data/sample: a case study of the LEOPAR mission, a 3U CubeSat with a 550 km sun-synchronous orbit, hyperspectral payload, and COTS MISC-3 platform components.
  • Analysis: the paper calculates generation, distribution, demand, storage, mode-level power/energy, scenario-level battery discharge, and DoD thresholds, then checks whether generated/stored energy and bus power ratings satisfy the mission modes.

## Limitations

  • The paper explicitly notes that further research could extend the method to include EPS modeling and development of energy management software.
  • The validation is demonstrated on a single case study (LEOPAR), so broader generalization beyond this mission is not directly shown in the text.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1109/access.2023.3271596

Cites

18 of 18 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

2 Valid · 6 Not valid · 16 Not checked · 56 Own results and interpretations

43 more claims

Create a free account to see all 80 claims and to verify the 1 reference still open.

See all claims — free account
  • It may state two separate claims as one. 18
  • The quote only partly states this claim. 2
  • Probably not a substantial claim. 22

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 18 references

Research works printed but not linked: 14

  1. [15] P. Lopes, ''Preliminary design and thermal study of the IGOSat project,'' M.S. thesis, Univ. Paris Diderot, Observatoire de Paris, Paris, France, 2014. -
  2. [14] S. Rossi, A. Ivanov, M. Richards, and V. Gass, ''The SwissCube's technologies results after four years of flight,'' in Proc. 13th Int. Astron. Conf. , Beijing, China, 2013, pp. 23-27. -
  3. [31] GPSRM 1 GNSS Receiver Module , Pumpkin, San Francisco, CA, USA, 2022. -
  4. [30] HiSPiCO S Band Transmitter for Small Satellites Highly Integrated S Band Transmitter , IQ Wireless, Berlin, Germany, 2015. -
  5. [33] Dragonfly Aerospace. MANTISIMAGER,High-PerformanceMantisCamera Systems for CubeSats . Accessed: Feb. 17, 2022. [Online]. Available: https://dragonflyaerospace.com/products/mantis/ <!-- image --> IGNACIO F. ACERO received the degree in electrical engineering from UN, Universidad Nacional de Colombia, in 1998, and the master's degree in electrical engineering from Universidad de los Andes in Colombia, in 2000. Since 2007, he has been a Professor with the Electronic Engineering Program, Universidad Sergio Arboleda, Bogota, Colombia. He is a member of the SIKU Research Group, working in the line of satellite design and testing. He is also an Internal Auditor of ISO 9001-2015, an Academic Peer of the Ministry of National Education, and a consultant in electrical energy management. <!-- image --> JONATHAN DIAZ received the degree in electronic engineering from Sergio Arboleda University, Bogotá, Colombia, in 2018. Currently, he is the CEO and the Co-Founder of VIT Sensors, a startup focused on developing innovative technologies to improve agricultural production in Colombia through effective crop monitoring, where he has received recognition from the Ministry of Science and the Ministry of Agriculture of Colombia to improve agricultural production in Colombia through effective crop monitoring. His research interests include the development of projects and/or entrepreneurship involving the IoT, robotics, and satellites to provide disruptive solutions in areas that require innovation. <!-- image --> RONALD HURTADO-VELASCO received the B.S. degree in physical engineering from the University of Cauca, Colombia, in 2006, and the M.S. degree in mechatronic systems from the University of Brasilia, Brazil, in 2010. Since 2011, he has been a Professor with Sergio Arboleda University, Bogota, Colombia. <!-- image --> <!-- image --> SERGIO RAMIRO GONZALEZ BAUTISTA received the bachelor's degree in electronic engineering from Universidad Pedagógica y Tecnológica de Colombia (UPTC) and the master's degree in electronic engineering from Pontificia Universidad Javeriana (PUJ). He is currently pursuing the Doctor of Philosophy (Ph.D.) degree. His research interests include automatic maintenance management systems, cyber-physical architectures for Industry 4.0, and automated guided vehicles (AGVs). SONIA RINCÓN graduated from UIS as a metallurgical engineer. She was only 24 years old when she was with the Air Maintenance Command, where she remained for 12 years. For her good performance, she won the opportunity for a Colfturo-Mindefensa scholarship to do a master's degree in aerospace manufacturing for two years at Cranfield University, Bedford, U.K. Upon her return, already as a Major in the Air Force, she was appointed the Head of the Center for Research in Aerospace Technologies, CITAE, Colombian Air Force, Cali, where, since 2018, she has been leading the technical-scientific aspects of space programs, such as the monitoring and operation of FACSAT-1, the first satellite of the institution. <!-- image --> FRANCISCO L. HERNÁNDEZ received the Specialist degrees from the University of Quindío, and the Systems Specialist and master's (engineering) degrees from Universidad del Valle. He is currently a Professor with Universidad del Valle in the chairs of space remote sensing, digital photogrammetry and principles and applications of RADAR images. He also directs the GIPER Remote Sensing Research Group and the LASER Remote Sensing Laboratory and advises a large number of degree projects in the area of remote sensing. His research interest includes the study of natural phenomena from satellite images. <!-- image --> JULIAN RODRIGUEZ-FERREIRA (Member, IEEE) received the degree in electronic engineering from Universidad Industrial de Santander (with mention ''Laureate thesis''), the master's degrees in astronomy and astrophysics and in space engineering from Paris Observatory and Paris-Diderot University, France, respectively, and the Ph.D. degree in astrophysics from Paris Observatory and the University of Paris-Saclay. He is currently a Professor with the School of Electrical, Electronics and Telecommunications Engineering, Universidad Industrial de Santander (UIS), the Head of the CEMOS Research Group, and the Head of the Aerospace Student's Group ''Semillero de Cohetería UIS Aeroespacial SCUA.'' He is also an Instrumentation Specialist for astrophysics at Instituto de Astrofísica de Canarias, Spain. As a Scientist, he has worked on the preparation of the satellite for earth climatology ''SMOS,'' the ''BepiColombo'' mission to the planet Mercury and the ''Euclid'' space telescope of the European Space Agency (ESA). He has been a Postdoctoral Fellow with Centre de Physique des Particules de Marseille, France, and a Postdoctoral Researcher with the Relativity and Gravitation Research Group, UIS. His current research interests include radio astronomy and the development of scientific instruments and platforms to observe the earth from the atmosphere and space. He held the Chair of the Colombian Government Space Council ''Comisión Colombiana del Espacio'' as a Representative of the Colombian Academy. He is also a Colombian Antarctic Scientist and explorer, in 2023, from the Colombian Antarctic Program. He has been awarded with public distinctions and won international contest in aerospace engineering has the Latin American Space Challenge, in 2022, and NASA's Deep Space Food Challenge, in 2021. <!-- image --> JESUS GONZALEZ-LLORENTE (Senior Member, IEEE) received the degree in electronics engineering from Universidad Nacional de Colombia, in 2003, the Diploma degree in software engineering from Francisco Jose de Caldas District University, in 2005, the M.S. degree in electrical engineering from the University of Puerto Rico at Mayagüez, in 2009, and the Ph.D. degree in engineering from the Kyushu Institute of Technology at Kitakyushu, Japan, in 2019. He was a Researcher with the National Astronomy and Ionosphere Center-Arecibo Observatory under Cornell University operation, in 2010. He was also an Adjunct Professor with the University of Puerto Rico at Mayaguez and a Visiting Scholar with the University of Arkansas, Fayetteville, USA. He led the electrical team of the Ten-Koh satellite launched by JAXA, in 2018. He was an IEEE AESS Distinguished Lecturer (2023-2024). His research interests include power converters, solar photovoltaic systems, electrical power systems, small satellites, and space systems engineering. Dr. Gonzalez-Llorente received the Emerging Space Leader Grant from the International Astronautical Federation (IAF), in 2015. He also received the United Nations/Japan Long-Term Fellowship, from 2016 to 2019, to participate in the Space Engineering International Course with the Department of Applied Science for Integrated Systems Engineering, Kyutech, Japan, as a part of the Postgraduate Study on Nanosatellite Technology in Collaboration with the United Nations Office for Outer Space Affairs (UNOOSA). He has been recognized as an Associate Researcher by the Ministry of Science Technology and Innovation of Colombia, since 2022.
  6. [32] MAI-400, 1/2U CubeSat ADACS , Maryland Aerosp., Crofton, MD, USA, 2016. <!-- image --> -
  7. [24] Custom PMDSAS Panel, Deployable, Per Cell , Pumpkin, San Francisco, CA, USA. Accessed: May 5, 2022. [Online]. Available: https://www. pumpkinspace.com/store/p166/Custom\_PMDSAS\_panel%2C\_deployable %2C\_per\_cell.html -
  8. [26] User Manual: Standalone 30 Wh Battery , Clyde Space, Uppsala, Sweden, 2013. -
  9. [25] User Manual CS-XUEPS2-60: FleXU CubeSat Electronic Power System Part #: 01-00732 and 01-01120, USM-01-00732; Issue C , Clyde Space, Uppsala, Sweden, 2013. -
  10. [20] J. Rodriguez-Ferreira et al., ''MISC-3 a Colombian CubeSat 3U for Earth observing applications,'' in Proc. 72nd Int. Astron. Congr. (IAC) , Dubai, United Arab Emirates, 2021, pp. 1-10. -
  11. 2013, MISC 3 CubeSat-class Payload Carrier Nanosatellite Assembly User Manual Revision B
  12. [28] Motherboard (MB) , Pumpkin, San Francisco, CA, USA, 2009. -
  13. [27] Pluggable Processor Module (PPM) D1 , Pumpkin, San Francisco, CA, USA, 2010. -
  14. [29] Radio Host Module 1 (RHM 1) With Globalstar Simplex and/or AstroDev Lithium-2-UM34 User Manual , Pumpkin, San Francisco, CA, USA, 2020. -

Cited by

Metadata

Authors
Acero, I. F., Diaz, J., Hurtado-Velasco, R., Bautista, S. R. G., Rincón, S., Hernández, F. L., Rodriguez-Ferreira, J., & Gonzalez-Llorente, J.
Affiliations
  • Universidad Sergio Arboleda (CO)
  • Ingenier&#x00ED;a Electr&#x00F3;nica, Escuela de Ciencias Exactas e Ingenier&#x00ED;a, Universidad Sergio Arboleda, Bogota, Colombia
  • Centro de Investigaci&#x00F3;n en Tecnolog&#x00ED;as Aeroespaciales (CITAE), Cali, Colombia
  • Universidad del Valle (CO)
  • Universidad Industrial de Santander (CO)
Venue
IEEE Access
Published
2023
Volume
11
Pages
43316-43332
ISSN
2169-3536 (ISSN-L)
OpenAlex
W4367333189
Cited by
24
References
21
Citations by year
2026: 8 · 2025: 12 · 2024: 3 · 2023: 1
FWCI
2.92
Type
journal article
Language
en
Open access
Locations
  • IEEE Access (publishedVersion, cc-by-nc-nd)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Espace ÉTS (ETS) (submittedVersion)
Funders
  • Government of Colombia through the Ministry of Science, Technology and Innovation
  • Colombian Air Force (75079)
Topics
  • Physical Sciences › Engineering › Aerospace Engineering › Spacecraft Design and Technology
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Space Technology and Applications
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
Keywords
CubeSat, power systems, power budget analysis, commercial off-the-shelf components, battery depth of discharge, charge-discharge cycling, operating modes, small satellites, mission requirements

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.