Review of non-isolated bi-directional DC-DC converters for plug-in hybrid electric vehicle charge station application at municipal parking decks
The DOI matches its Crossref record; 17 of the 18 references it cites were found in a registry or an index.
Abstract
There is a growing interest on plug-in hybrid electric vehicles (PHEV's) due to energy security and green house gas emission issues, as well as the low electricity fuel cost. As battery capacity and all-electric range of PHEV's are improved, and potentially some PHEV's or EV's need fast charging, there is increased demand to build high power off-board charging infrastructures. A charge station architecture for municipal parking decks has been proposed, which has a DC microgrid to interface with multiple DC-DC chargers, distributed renewable power generations and energy storage, and provides functionalities of normal and rapid charging, grid support such as reactive and real power injection (including V2G), current harmonic filtering and load balance. Several non-isolated bidirectional DC-DC converters suited for charge station applications have been reviewed and compared, as the major focus of this paper. Half bridge converter is a good candidate but it is difficult to maintain high efficiency in wide battery pack voltage range. A variable frequency pulse width modulation (VFPWM) scheme is proposed to mitigate this issue. Finally three-level bi-directional DC-DC converter is suggested to be employed in this application. A 10kW prototype verifies that 95.1-97.9% full load efficiency can be achieved in charging mode with 180-360V battery pack voltage. In addition, the inductor size is only one third of the half bridge counterpart, which is a great advantage for high power converters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conversely, in reverse operation mode ( VH to VL ), the converter functions as a Buck converter, which steps down the high voltage to a lower output voltage suitable for the load [40].”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [40]
Citations
Cites
Ultracapacitor-Based Auxiliary Energy System for an Electric Vehicle: Implementation and Evaluation
Ortuzar, M., Moreno, J., & Dixon, J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.894713 · Cited by 529 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundFundamental Considerations of Three-Level DC–DC Converters: Topologies, Analyses, and Control
Ruan, X., Li, B., Chen, Q., Tan, S.-C., & Tse, C. K. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.927218 · Cited by 254 · cited 1×
“Three-level converters have been proposed for high DClink voltage applications [15-18].”
BackgroundComparing DC-DC converters for power management in hybrid electric vehicles
Schupbach, R. M., & Balda, J. C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1210630 · Cited by 244 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundThree-level buck converter for envelope tracking applications
Yousefzadeh, V., Alarcon, E., & Maksimovic, D. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869728 · Cited by 235
Power System Level Impacts of PHEVs
Roe, C., Farantatos, E., Meisel, J., Meliopoulos, A. P., & Overbye, T. (2009) · 2009 42nd Hawaii International Conference on System Sciences · doi:10.1109/hicss.2009.345 · Cited by 159
Plug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility
Wirasingha, S. G., Schofield, N., & Emadi, A. (2008) · 2008 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2008.4677702 · Cited by 154 · cited 1×
“After more than one million HEV’s are driven on the road today, there is a growing interest on plug-in hybrid electric vehicles (PHEV’s), which is defined by IEEE-USA’s Energy Policy Committee as (1) a battery storage system of 4kWh or more, used to power the motion of the vehicle, (2) a means of recharging that batte…”
BackgroundAutomotive application of multi-phase coupled-inductor DC-DC converter
Czogalla, J., Li, J., & Sullivan, C. R. (2004) · 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003. · doi:10.1109/ias.2003.1257758 · Cited by 112 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundThree-level buck converter for envelope tracking in RF power amplifiers
Yousefzadeh, V., Alarcón, E., & Maksimović, D. (2005) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2005.1453248 · Cited by 98 · cited 1×
“Three-level converters have been proposed for high DClink voltage applications [15-18].”
BackgroundKulshrestha, P., Wang, L., Chow, M., & Lukic, S. M. (2009) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2009.5275688 · Cited by 95 · cited 1×
“An intelligent energy management system (iEMS) with wireless Zigbee communication platform can coordinate system operation [9].”
BackgroundSelf-citationUtilization and effect of plug-in hybrid electric vehicles in the United States power grid
Jenkins, S. D., Rossmaier, J. R., & Ferdowsi, M. (2008) · 2008 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2008.4677501 · Cited by 94 · cited 1×
“On the other hand, vehicle to grid (V2G) operation provides a potential solution of using PHEV batteries as energy storage devices for high penetration of distributed wind and solar power generations and smoothes their intermittent power [8].”
Background
Research works printed but not linked: 3
- shi, 2006, Three-Level DC-DC Converter: Four Switches Vsmax=Vin/2. TL Voltage Waveform before LC Filter, IEEE 2006 Power Electronics Specialists Conference
- 2009, The Global Outlook for PHEVs: Business Issues, Technology Issues, Key Players, and Market Forecasts, Pike Research Report
- 2008, Autos and Auto-Related, Plug in Hybrids: The Next Automotive Revolution, Morgan Stanley Report, 13
Cited by
Items 101–200 of 322
Bi-directional power flow rapid charging system using coupled inductor for electric vehicle
Suh, Y., Kang, T., Park, H., Kang, B., & Kim, S. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342329 · Cited by 27
“Therefore there is a trend for battery chargers shifting from compact low power on-board installation to shared large high-power off-board charging station [7].”
BackgroundAn overview on V2G strategies to impacts from EV integration into power system
Ma, Y., Zhang, B., Zhou, X., Gao, Z., Wu, Y., Yin, J., & Xu, X. (2016) · Chinese Control and Decision Conference (CCDC) · doi:10.1109/ccdc.2016.7531477 · Cited by 29
“In [11], comparing with several non-isolated bidirectional DC-DC converters, it puts forward the variable frequency pulse width modulation (VFPWM) used in the three-level DC-DC converter to improve the power efficiency of half bridge converter at lower battery pack voltage.”
MethodSelf-citationRivera, S., Wu, B., Wang, J., Athab, H. S., & Kouro, S. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700158 · Cited by 26
“This architecture is also beneficial for the connection of different distributed power systems such as renewable energy generators (PV or wind) or energy storage devices, like the concept proposed in [11].”
BackgroundSahbani, A., Cherif, K., & Saad, K. B. (2020) · International Journal of Smart grid · doi:10.20508/ijsmartgrid.v4i2.102.g86 · Cited by 43
“We find different topologies in literature, the bidirectional DC-DC converter can be isolated [2-6] and non-isolated [7-13].”
BackgroundANFIS Controlled Grid Connected Electric Vehicle Charging Station Using PV Source
Jaladi, K. K., Kumar, S., & Saini, L. M. (2020) · IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA) · doi:10.1109/icmica48462.2020.9242717 · Cited by 23
“BES is equipped with a bi-direction DC/DC converter that responds at high power demand by supplying power to the charging station and absorbs extra power by charging the BES [10], [11].”
BackgroundCarstensen, C., & Biela, J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2504402 · Cited by 22
“3, a three-level buck converter [16] is depicted.”
BackgroundModeling and control of bidirectional DC-DC converter fed PMDC motor for electric vehicles
Joshi, M. C., & Samanta, S. (2013) · IEEE India Conference · doi:10.1109/indcon.2013.6726091 · Cited by 25
“converter has the lower device stress, lower losses as well has the lesser no of components as compared to the bidirectional cascade, buck-boost and cuk converters [2,3].”
BackgroundFamily of universal bidirectional DC–DC converters with an extended voltage gain
Axelrod, B., Berkovich, Y., & Beck, Y. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.6243 · Cited by 21
“The bidirectional softswitching converter based on Cuk converter has been described in [5, 6].”
MethodSmart charging infrastructure for electric vehicles
Ul-Haq, A., Buccella, C., Cecati, C., & Khalid, H. A. (2013) · International Conference on Clean Electrical Power · doi:10.1109/iccep.2013.6586984 · Cited by 25
“Charging station with storage system using AC/DC power converter or and DC/DC bidirectional converter has also been proposed, keeping stress on the power grid to a minimum to support additional load of EV charging stations [35], [36].”
MethodHardware Design of a 150kW/1500V All-SiC Grid-forming Photovoltaic Synchronous Generator (PVSG)
Chen, Z., Rizi, H. S., Xu, W., Yu, R., & Huang, A. Q. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773550 · Cited by 20
“Compared with the conventional two-level boost converter, three-level topology can use lower voltage SiC devices and much smaller boost inductors, achieving higher efficiency and power density [12]-[14].”
BackgroundSelf-citationVehicle Electrification: Technologies, Challenges, and a Global Perspective for Smart Grids
Monteiro, V., Afonso, J. A., Sousa, T. J. C., Cardoso, L. A. L., Pinto, J. G. O., & Afonso, J. L. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.89655 · Cited by 20
Analysis of Interleaved DC-DC Converter using ANFIS Control for EV Charging Applications
Ram, S. K., Kumar, N., Verma, B. K., Abhishek, A., Ranjan, R., Mishra, S., & Akbar, S. A. (2021) · International Conference on Inventive Computation Technologies (ICICT) · doi:10.1109/icict50816.2021.9358606 · Cited by 20
“It is used in applications where nonisolation, step-down conversion ratio and high output current with low ripple are required [15-17].”
MethodReview on Renewable Energy Based EV Charging System with Grid Support Functionality
Ram, S. K., Devassy, S., Verma, B. K., Mishra, S., & Akbar, S. A. (2021) · International Conference on Advanced Computing and Communication Systems (ICACCS) · doi:10.1109/icaccs51430.2021.9442027 · Cited by 22
“Topology for electric vehicle chargers can be categorized depending upon the location of chargers (on-board and off board), direction of power flow (unidirectional/ bidirectional) and other features such as vehicle integration and type of renewable energy used in the systems [29], [30].”
BackgroundAhmed, A., Khan, M. A., Badawy, M. O., Sozer, Y., & Husain, I. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646869 · Cited by 21
Fault analysis of an active LVDC distribution network for utility applications
Wang, D. J., Emhemed, A. S., Burt, G., & Norman, P. (2016) · International Universities Power Engineering Conference (UPEC) · doi:10.1109/upec.2016.8114002 · Cited by 24
“Diagram of DC/DC Bidirectional Converter [30]”
BackgroundGrid Connected Electric Vehicle Charging Station Using PV Source
Kumar, S., & Jaladi, K. K. (2020) · IEEE International Conference on Measurement, Instrumentation, Control and Automation (ICMICA) · doi:10.1109/icmica48462.2020.9242806 · Cited by 20
“3, a simple structure is used in the bidirectional DC/DC converter which has two ideal switch and the advantages of low cost, simple structure, high reliability and high efficiency [8], [9].”
BackgroundMethodKhaldi, H. S., & Ammari, A. C. (2015) · International Renewable Energy Congress · doi:10.1109/irec.2015.7110930 · Cited by 18
“The use of the three level DC/DC converters is justified view of point performance in comparison with the classic DC/DC converters [4,7,8].”
Raju, V. S. N. N., Premalatha, M., & K, D. V. S. K. R. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.08.261 · Cited by 18
Design of a sustainable residential microgrid system including PHEV and energy storage device
Roggia, L., Rech, C., Schuch, L., Baggio, J. E., Hey, H. L., & Pinheiro, J. R. (2011) · European Conference on Power Electronics and Applications · Cited by 23
Zhou, L., Jahnes, M., Eull, M., Wang, W., Cen, G., & Preindl, M. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3165143 · Cited by 17
Grid Integration of PV Based Electric Vehicle Charging Stations: A Brief Review
Ahmed, S. I., Salehfar, H., & Selveraj, D. F. (2022) · North American Power Symposium (NAPS) · doi:10.1109/naps56150.2022.10012159 · Cited by 19
“According to references [53, 54], three-level bi-directional dc-dc converters with half-bridge topology are ideal for EV charging systems due to their efficiency, rapid charging capability, and flexible charging operation with constant current and voltage mode.”
BackgroundMobile Charging Stations: A Comprehensive Review of Converter Topologies and Market Solutions
Neto, R. C., Bandeira, C. M., Azevedo, G. M. S., Limongi, L. R., de Carvalho, M. R. S., Castro, J. F. C., Rosas, P. A. C., Venerando, A. C., Spader, N., & Bueno, E. J. (2024) · Energies · doi:10.3390/en17235931 · Cited by 16
Nisha, K. S., & Gaonkar, D. N. (2022) · Electrical Engineering · doi:10.1007/s00202-022-01492-w · Cited by 20
“In [13], a 10 kW experiment prototype of three-level bi-directional DC–DC converter in municipal parking deck charge station application is done, but it is done with some test switching pulses with constant duty cycle, i.”
Background30kW DC-DC Converters with Regenerative Mode for Electric Cars
Ibáñez, F. M., Vadillo, J., Maiza, M. M.-I., & Echeverría, J. M. (2012) · Journal of Power Electronics · doi:10.6113/jpe.2012.12.2.233 · Cited by 17
Kang, T., Chae, B., & Suh, Y. (2013) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia.2013.6579143 · Cited by 18
“Therefore there is a trend for battery chargers shifting from compact low power on-board installation to shared large high-power off-board charging station [7].”
BackgroundThapliyal, R., Bose, S., & Dwivedi, P. (2023) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2023.3344039 · Cited by 15
Grid-connected quasi-Z-source PV inverter for electricvehicle charging station
Rasin, Z., & Rahman, M. F. (2013) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2013.6749831 · Cited by 15
“However as the harvested energy from PV is constrained by the factors such as sun irradiation availability and size and space of PV array installation, the charging station still normally need to be connected to the grid to maintain a stable power supply.”
BackgroundAnalysis and Design of a Nonisolated Bidirectional DC–DC Converter Based on CLC Network
Li, Y., Wang, Y., Song, H., & Xu, D. (2021) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2021.3096731 · Cited by 15
“Li and He [17] and Du et al.[18], respectively, point out that nonisolated converters will be widely used in photovoltaic grid-connected power generation and plug-in hybrid”
Grid Integrated Bidirectional EV Battery Charger in V2G-G2V Mode With Improved Power Quality
Dixit, A., Swarnkar, P., & Nema, R. (2023) · IEEE International Students' Conference on Electrical, Electronics and Computer Science (SCEECS) · doi:10.1109/sceecs57921.2023.10062990 · Cited by 15
Tabari, M., & Yazdani, A. (2016) · IEEE Power Engineering Society General Meeting · doi:10.1109/pesgm.2016.7741152 · Cited by 16
Sattianadan, D., Saravanan, K., Murugan, S., Hari, N., & Venkadesh, P. (2019) · International Journal of Power Electronics and Drive Systems (IJPEDS) · doi:10.11591/ijpeds.v10.i1.pp366-373 · Cited by 14
Guo, S., Ni, X., Tan, K., & Huang, A. Q. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7049238 · Cited by 15
Self-citationBidirectional three-level DC-DC converters: Sum-difference modeling and control
Eull, M., & Preindl, M. (2017) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2017.7993334 · Cited by 14
Energy Transport Station Deployment in Electric Vehicles Energy Internet
Sui, Y. F., Yi, P., Liu, X., & Zhu, T. (2019) · IEEE Access · doi:10.1109/access.2019.2926408 · Cited by 18
“DC charging electric vehicles do not need to convert DC to AC, the efficiency of which process is 95% [38].”
BackgroundCircuit Configurable Bidirectional DC-DC Converter for Retired Batteries
Teng, J., Shen, P., Liu, B., & Chen, S. (2021) · IEEE Access · doi:10.1109/access.2021.3129249 · Cited by 15
“[4], [5] reviewed the non-isolated bidirectional DC-DC converters for ESSs and Plug-in Hybrid EVs (PHEVs).”
BackgroundModeling, Analysis and Design of Renewable Energy Nanogrid Systems
Cvetkovic, I. (2010) · VTechWorks (Virginia Tech) · Cited by 18
RETRACTED ARTICLE: Bidirectional DC-DC converter circuits and smart control algorithms: a review
Viswanatha, V., Ramachandra, A. C., & Reddy, R. (2022) · Journal of Electrical Systems and Information Technology · doi:10.1186/s43067-022-00048-z · Cited by 14
RetractedOn a battery/supercapacitor powered SRM drive for EV with integrated on-board charger
He, J., Hu, K., & Liaw, C. M. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125491 · Cited by 14
“Some existing DC/DC front-end converters can be found in [22-27].”
BackgroundAfshari, E., Moradi, G. R., Ramyar, A., Rahimi, R., Farhangi, B., & Farhangi, S. (2017) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2017.7993249 · Cited by 14
Charge station placement in electric vehicle energy distribution network
Xu, J., Yi, P., Xie, T., Wang, W., Liu, X., & Zhu, T. (2017) · International Conference on Communications · doi:10.1109/icc.2017.7996576 · Cited by 13
“Follow-up works paid more attention to some preliminary conception like conceptual framework of integrating EV into power system, establishing connection between EV and new source to develop green economy [15].”
BackgroundDesign of high‐efficiency non‐insulated step‐up converters
Schirone, L., & Macellari, M. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0554 · Cited by 12
Du, Y., Huang, A. Q., Yu, X., & Li, J. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520515 · Cited by 15
“Recently more and more work on DC microgrids has been reported, including plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) DC charging infrastructure [11][12], DC microgrid for data center [13][14] and for home [15][16].”
BackgroundSelf-citationDesign and simulation of a fast DC recharging station for EV
Castiglia, V., Livreri, P., Miceli, R., Galluzzo, F. R., Santelia, G., & Schettino, G. (2017) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2017.8191243 · Cited by 12
“This topology can operate both in buck mode, powering the battery with an adjustable voltage lower than the input voltage (VDC), and in boost mode, providing an adjustable voltage input greater than that of the battery [7], [8].”
BackgroundNasir, A. (2021) · doi:10.33422/4th.msetconf.2021.03.02 · Cited by 13
“Due to its three-level nature, the three-level boost converter is suitable for interfacing the EV battery with a bipolar bus such as the EV charging station topologies proposed in [60], [61] and [62].”
BackgroundA new power circuit topology for energy router
Lu, S., Zhao, Z., Ge, J., Yuan, L., & Lu, T. (2014) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2014.7013810 · Cited by 12
Wani, R., Patil, S. L., & Shinde, P. (2021) · IEEE International Conference for Convergence in Technology (I2CT) · doi:10.1109/i2ct51068.2021.9418219 · Cited by 11
A novel concept of unidirectional bridgeless combined boost-buck converter for EV battery chargers
Monteiro, V., Pinto, J. G. O., Exposto, B., Monteiro, L. F. C., Couto, C., & Afonso, J. L. (2015) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2015.7281467 · Cited by 13
“In the literature can also be found several studies about dc-dc back-end converters, where the main topologies are based in the half-bridge converter [21], the interleaved converters [22], and cascade converters [23].”
BackgroundPerformance Evaluation of a 500 W Bidirectional Converter for DC Microgrid
Abhishek, A., Ranjan, A., Singh, B., & Akbar, S. A. (2022) · IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE) · doi:10.1109/pesgre52268.2022.9715753 · Cited by 11
Charging Architectures for Electric and Plug-In Hybrid Electric Vehicles
Rivera, S., Kouro, S., & Wu, B. (2016) · Springer eBooks · doi:10.1007/978-3-319-43651-7_4 · Cited by 13
An Improved Mode Transition Technique for a Non-Isolated Bidirectional DC-DC Converter
Sharma, A., Nag, S. S., Bhuvaneswari, G., & Veerachary, M. (2020) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2020.2984664 · Cited by 11
Bidirectional DC–DC Converter with Coupled Inductor Fordc-Bus Regulation in Microgrid Applications
Mayer, R., Kattel, M. B. E., & Oliveira, S. V. G. (2020) · Eletrônica de Potência · doi:10.18618/rep.2020.3.0007 · Cited by 10
“The topology has fewer components as compared to the bidirectional cascade, Buck-Boost, Cuk and Interleaved bidirectional dc-dc converters [14]–[17], it allows bidirectional power flow between dc sources E1 and E2.”
BackgroundChen, C., Chen, Z., Rizi, H. S., & Huang, A. Q. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131202 · Cited by 11
“bidirectional DC-DC converters, such as the three-level flying capacitor converter (FCC) and three-level bidirectional (TLB) DC-DC converter, are promising candidates because of reduced device voltage rating requirement and three-level voltage waveforms [11]-[15], [21]-[28].”
BackgroundSelf-citationParallel Bi-directional DC-DC converter for energy storage system
Ouchi, T., Kanoda, A., & Takahashi, N. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6870062 · Cited by 10
Control of DC-DC Converter for Interfacing Supercapcitors Energy storage to DC Micro Grids
Mohamed, M. A. A., Guan, Q., & Rashed, M. (2018) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2018.8607327 · Cited by 11
Wang, X., Liu, Y., Qian, W., Janabi, A., Wang, B., Lu, X., Zou, K., Chen, C., & Peng, F. Z. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda46397.2019.8998951 · Cited by 13
“The DAB is the main workhorse to transfer energy directionally from battery to the other DC side.”
BackgroundInfluentialTan, L., Wu, B., Yaramasu, V., & Rivera, S. (2015) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2015.7334139 · Cited by 10
“The three-level dc-dc converter has been well implemented in high-voltage high-power applications so as to reduce the voltage stress across switches and to increase the power rating [11]–[14].”
BackgroundMorandin, M., Bolognani, S., Petrella, R., Pevere, A., & Calligaro, S. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6166041 · Cited by 10
Optimal Operation of Smart Grids Including Distributed Generation Units and Plug in Vehicles
Bracale, A., Pierluigi Caramia, M. S., & Proto, D. (2017) · Renewable Energy and Power Quality Journal · doi:10.24084/repqj09.553 · Cited by 10
Bidirectional DC-DC Converter Circuits and Smart Control Algorithms: A ReviewPreprint
Viswanatha, V., Ramachandra, A. C., & Venkata Siva Reddy, R. (2022) · Research Square · doi:10.21203/rs.3.rs-1217632/v1 · Cited by 12
Digital controlled bidirectional DC/DC converter for electrical and hybrid vehicles
Cacciato, M., Consoli, A., Crisafulli, V., Abbate, N., & Vitale, G. (2010) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2010.5606649 · Cited by 9
“The traction battery is charged by means of the hybrid system control, while the 12 V battery is charged by the traction battery via the DC/DC converter [ 9-15 ].”
MethodEbrahimi, S., Akbari, R., Tahami, F., & Oraee, H. (2016) · Electric Power Components and Systems · doi:10.1080/15325008.2016.1157108 · Cited by 9
Conexão de Veículos Elétricos à Rede de Energia Elétrica para Recarga de Baterias: Uma Visão Geral
Rodrigues, M. D. C. B. P., Oliveira, J. G., Ferreira, A. A., Barbosa, P. G., & Braga, H. A. C. (2014) · Eletrônica de Potência · doi:10.18618/rep.2014.2.194207 · Cited by 17
Monteiro, V., Sousa, T. J. C., Sepúlveda, M. J., Couto, C., Lima, A. G. G., & Afonso, J. L. (2019) · International Conference on Smart Energy Systems and Technologies (SEST) · doi:10.1109/sest.2019.8849084 · Cited by 10
“1, where for other applications the same topology can be applied, such as: multilevel dc-dc converters [25]; ultracapacitors [26][27]; automotive applications [28][29].”
BackgroundA novel architecture of a bidirectional bridgeless interleaved converter for EV battery chargers
Monteiro, V., Exposto, B., Pinto, J. G. O., Fernandes, J. C. A., Monteiro, L. F. C., & Afonso, J. L. (2015) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2015.7281466 · Cited by 10
“On the other hand, for the dc-dc back-end non-isolated converter, the main topologies are based in the half-bridge converter [21], the interleaved converters [22], and cascade converters [23].”
BackgroundVishnu, P., Ajaykrishna, R., & Thirumalini, S. (2012) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2012.6360971 · Cited by 9
“The present study reveals the following facts: • Cost of the battery modules is significantly reduced when compared to fully Li-ion battery packs.[20] • About 40-50% of CO2 reduction in emission is achieved.”
BackgroundZero Sequence Voltage Control Enabling Transformerless Electric Vehicle Chargers
Eull, M., Wang, W., Zhou, L., & Preindl, M. (2021) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec51675.2021.9490108 · Cited by 9
Dual Output Voltage Balancing Strategy in EV Charging Stations Using Model Predictive Control
Sadiq, M., Su, C., Alfaro, C., Mutarraf, M. U., Hoang, L. Q. N., Buzna, Ľ., & Micallef, A. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3541600 · Cited by 9
Capacitor Voltage Balancing in a Three-Level-Converter-Based Energy Storage System
Burusteta, S., Pou, J., Ceballos, S., Marino, I., Alzola, J. Á., & Agelidis, V. G. (2013) · EPE Journal · doi:10.1080/09398368.2013.11463863 · Cited by 8
“Some consequences are that the efficiency of the system may increase up to 2-3 % in charge or discharge operations [18], being more than double in the round-trip efficiency, and that the overall size and weight of the system decreases because the inductance can be reduced [19, 20].”
BackgroundOptimization for charge station placement in electric vehicles energy network
Sui, Y. F., Yi, P., Liu, X., Wang, W., & Zhu, T. (2017) · doi:10.1145/3132479.3132480 · Cited by 16
“Charging EVs by DC power doesn’t need to convert DC power to AC power, of which the efficiency is 95% [9].”
BackgroundA Survey on Charging Station Architectures for Electric Transportation
Hariri, R., Sebaaly, F., Ibrahim, C., Williamson, S. S., & Kanaan, H. Y. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589396 · Cited by 8
“1, is more efficient due to the smaller number of needed converters (conversion stages) [5,16,19,20].”
BackgroundHabib, S., Ehsan, F., Liu, H., Nadeem, M. H., Abbas, F., & Numan, M. (2021) · Springer eBooks · doi:10.1007/978-3-030-82796-0_7 · Cited by 9
Kumar, K. N., Miskiewicz, R. M., Trochimiuk, P., Rąbkowski, J., & Peftitsis, D. (2025) · Electronics · doi:10.3390/electronics14224522 · Cited by 8
“A DC link with a bipolar DC voltage is considered because it ensures lower on-state losses in devices, higher power quality, and enhanced flexibility [15–17] while charging the EVs.”
Distributed dc bus EV charging station using a single dc-link h-bridge multilevel converter
Rivera, S., Wu, B., & Kouro, S. (2014) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864836 · Cited by 7
“In addition, the dc architecture enables the integration of distributed generators and also energy storage stages, as suggested in [10], [12].”
BackgroundA vehicle-to-grid based reactive power dispatch approach using particle swarm optimization
Zhang, W., Das, P., & Srinivasan, D. (2016) · IEEE Congress on Evolutionary Computation (CEC) · doi:10.1109/cec.2016.7744351 · Cited by 8
“Moreover, a recent study shows that V2G can be modularly organized as parking lots [9].”
BackgroundA quasi-resonant bi-directional tri-mode DC-DC converter with limited valley current
Moshirvaziri, M., Li, C., & Trescases, O. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165869 · Cited by 7
“While several isolated and non-isolated topologies have been proposed for highpower EV applications [5], [6], the boost topology was chosen due to its low cost and high efficiency, especially when operated with soft-switching.”
BackgroundFault Ride-Through Power Electronic Topologies for Hybrid Energy Storage Systems
Georgious, R., García, J., Sumner, M., Saeed, S., & García, P. (2020) · Energies · doi:10.3390/en13010257 · Cited by 7
“This yields to a final configuration of two parallel bidirectional buck-boost converters [25,26], as shown in Figure 4.”
MethodBidirectional DC-DC Converter for Incorporating Regenerative Braking in E-bikes
Sharma, A., Mishra, R., Yadav, A. K., & Phukan, A. (2018) · International Conference on Electrical, Electronics, Communication, Computer and Optimization Techniques (ICEECCOT) · doi:10.1109/iceeccot43722.2018.9001557 · Cited by 8
“Du et al presented a review of the various non-isolated BDC topologies mentioned above [15, 19].”
BackgroundArango, J. D. S., Arias-Londoño, A., & Echeverri, M. G. (2018) · IEEE Latin America Transactions · doi:10.1109/tla.2018.8528234 · Cited by 7
DESIGN OF A BIDIRECTIONAL DC-DCCONVERTER FOR HYBRID ELECTRICVEHICLES (HEV) USING MATLAB
Dutta, D., & Ganguli, S. (2013) · International Journal of Advanced Research in Electrical Electronics and Instrumentation Engineering · Cited by 6
Impact of V2G on substation capacity and SVR devices for Radial Distribution network
Chukwu, U. C., & Nworgu, O. A. (2013) · IEEE SoutheastCon · doi:10.1109/secon.2013.6567375 · Cited by 7
Design a Modified Bi-Directional Converter for Solar LED Lighting System
Wang, Y., Chen, X., Tang, H., Yang, Y., Wen, H., & Lin, Y. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557641 · Cited by 6
“Taking into account the time-sharing operating characteristics of solar LED lighting system, bidirectional converter topology can be used[14], the system only need single converter to achieve control conversion function.”
MethodA Review of DSTATCOM Used in Solar Photovoltaic System
Gajjar, N. A., & Zaveri, T. (2018) · International Conference and Utility Exhibition on Energy, Environment and Climate Change (ICUE) · doi:10.23919/icue-gesd.2018.8635787 · Cited by 6
Malek, A., & Varjani, A. Y. (2020) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc49159.2020.9088452 · Cited by 6
“In contrast, the isolated type has a higher voltage gain than its counterpart [3].”
BackgroundFuture developments in vehicle-to-grid technologies
Longo, M., Yaïci, W., & Foiadelli, F. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816816-5.00028-0 · Cited by 6
Multi-Pulse Converter based Rectification Scheme for Improving Power-Quality of EVs Charging Station
Khalid, M. R., Alam, M. S., Amrr, S. M., & Asghar, M. S. J. (2021) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet48154.2021.9375681 · Cited by 5
Subramanian, P. S., & Sutha, S. (2023) · Electric Power Components and Systems · doi:10.1080/15325008.2023.2240799 · Cited by 5
“Du et al. [28] presented a comprehensive review on non-isolated bidirectional DC – DC converter topologies for improving the performance of EV applications, which includes the boost DC – DC, buck DC – DC, and CUK/SEPIC DC – DC converters.”
BackgroundWu, W., Jinpeng, H., & Xinlei, W. (2018) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2018.8397734 · Cited by 5
“In [9], the system efficiency would be improved, the converter volume and the filter inductance would be reduced while three level topology was adopted.”
BackgroundPerformance Assessment of Two Alternative DC-DC Converter Topologies for EV Charging Applications
Bento, F., & Cardoso, A. J. M. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243075 · Cited by 5
“While some literature selects interleaved DC-DC converters as the preferable topology for EV charging applications [9]–[12], other studies adopt multi-level DC-DC converters as the topology of choice [13]–[15].”
BackgroundGrid Connected Off-Board EV Charger with V2G / G2V and V2V Capability
Sankar, N., Vaideeswaran, V., Kumar, J. S., & Singaravel, M. M. R. (2023) · International Conference on Signal Processing, Computation, Electronics, Power and Telecommunication (IConSCEPT) · doi:10.1109/iconscept57958.2023.10169951 · Cited by 5
“The bidirectional, non-isolated, low-cost converter proposed in [17, 18] achieves high efficiency at rated power with fewer components and simple control logic.”
BackgroundBolognani, S., Morandin, M., Calligaro, S., Petrella, R., & Pevere, A. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803402 · Cited by 5
Novel multi-input bi-directional hybrid system to manage electric vehicles in V2G and Plug-In modes
Rezaee, S., & Farjah, E. (2012) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2012.6183360 · Cited by 5
Mahghani, M., & Afjei, E. S. (2017) · Iranian Conference on Electrical Engineering · doi:10.1109/iraniancee.2017.7985196 · Cited by 5
Tabari, M., & Yazdani, A. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310135 · Cited by 6
Modeling, control, and energy management for DC microgrid
Han, Y., Chen, W., & Li, Q. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812154-2.00004-3 · Cited by 5
Experimental Results of a Bidirectional Coupled Inductor DC-DC Converter
da Rosa, M. B., Kattel, M. B. E., Mayer, R., & Oliveira, S. V. G. (2019) · IEEE Brazilian Power Electronics Conference and Southern Power Electronics Conference · doi:10.1109/cobep/spec44138.2019.9065476 · Cited by 5
“The topology has fewer components and smaller inductor volume compared to the bidirectional cascade, Buck-Boost, Cùk and interleaved bidirectional DC-DC converters [7]-[11], also allowing bidirectional power flow between E1 and E2.”
BackgroundStable startup of seamless controlled parallel bidirectional DC-DC converter
Ouchi, T., Kanouda, A., Takahashi, N., & Moteki, M. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309279 · Cited by 4
“In addition, several types of energy-storage systems (ESSs), such as electric vehicle (EV) charging infrastructures [4]-[8], for securing power quality have been developed.”
BackgroundSeamless controlled parallel bi-directional DC-DC converter for energy storage system
Ouchi, T., Kanouda, A., Takahashi, N., & Moteki, M. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910837 · Cited by 4
“In addition, several types of energy storage systems (ESSs), such as electric vehicle (EV) charging infrastructures [4]-[8], have been developed to secure power quality.”
BackgroundModeling and design for integrated coupled inductors in interleaved three-level DC/DC converters
Qin, R., & Lee, F. C. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095824 · Cited by 4
“INTRODUCTION There is a growing interest on application of renewable energy systems with PV farm, energy storage system or electrical vehicle charge station in recent years [1-3].”
BackgroundCarli, G., Shafiei, A., & Williamson, S. S. (2013) · Green energy and technology · doi:10.1007/978-1-4471-5104-3_14 · Cited by 4
Novel bidirectional DC-DC-AC three-phase power converter
dos Santos, E. C., & Darabi, M. (2013) · IEEE Power and Energy Conference at Illinois (PECI) · doi:10.1109/peci.2013.6506053 · Cited by 4
Metadata
- Authors
- Du, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A.
- Affiliations
- North Carolina State University (US)
- Venue
- 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2010-02
- Pages
- 1145-1151
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2158250329
- Cited by
- 314
- References
- 18
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 14 · 2023: 17 · 2022: 15 · 2021: 23 · 2020: 24 · 2019: 23 · 2018: 23 · 2017: 17 · 2016: 23 · 2015: 32 · 2014: 19 · 2013: 25 · 2012: 26
- FWCI
- 30.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- plug-in hybrid electric vehicles, vehicle-to-grid, DC microgrid, half-bridge converter, three-level converter, converter efficiency, inductor size reduction, harmonic filtering, load balancing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.