Review of non-isolated bi-directional DC-DC converters for plug-in hybrid electric vehicle charge station application at municipal parking decks
The DOI matches its Crossref record; 17 of the 18 references it cites were found in a registry or an index.
Abstract
There is a growing interest on plug-in hybrid electric vehicles (PHEV's) due to energy security and green house gas emission issues, as well as the low electricity fuel cost. As battery capacity and all-electric range of PHEV's are improved, and potentially some PHEV's or EV's need fast charging, there is increased demand to build high power off-board charging infrastructures. A charge station architecture for municipal parking decks has been proposed, which has a DC microgrid to interface with multiple DC-DC chargers, distributed renewable power generations and energy storage, and provides functionalities of normal and rapid charging, grid support such as reactive and real power injection (including V2G), current harmonic filtering and load balance. Several non-isolated bidirectional DC-DC converters suited for charge station applications have been reviewed and compared, as the major focus of this paper. Half bridge converter is a good candidate but it is difficult to maintain high efficiency in wide battery pack voltage range. A variable frequency pulse width modulation (VFPWM) scheme is proposed to mitigate this issue. Finally three-level bi-directional DC-DC converter is suggested to be employed in this application. A 10kW prototype verifies that 95.1-97.9% full load efficiency can be achieved in charging mode with 180-360V battery pack voltage. In addition, the inductor size is only one third of the half bridge counterpart, which is a great advantage for high power converters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conversely, in reverse operation mode ( VH to VL ), the converter functions as a Buck converter, which steps down the high voltage to a lower output voltage suitable for the load [40].”
From Bidirectional DC-DC Converter Topologies for Hybrid Energy Storage Systems in Electric Vehicles: A Comprehensive Review (2025) · cites this paper as [40]
Citations
Cites
Ultracapacitor-Based Auxiliary Energy System for an Electric Vehicle: Implementation and Evaluation
Ortuzar, M., Moreno, J., & Dixon, J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.894713 · Cited by 529 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundFundamental Considerations of Three-Level DC–DC Converters: Topologies, Analyses, and Control
Ruan, X., Li, B., Chen, Q., Tan, S.-C., & Tse, C. K. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.927218 · Cited by 254 · cited 1×
“Three-level converters have been proposed for high DClink voltage applications [15-18].”
BackgroundComparing DC-DC converters for power management in hybrid electric vehicles
Schupbach, R. M., & Balda, J. C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1210630 · Cited by 244 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundThree-level buck converter for envelope tracking applications
Yousefzadeh, V., Alarcon, E., & Maksimovic, D. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869728 · Cited by 235
Power System Level Impacts of PHEVs
Roe, C., Farantatos, E., Meisel, J., Meliopoulos, A. P., & Overbye, T. (2009) · 2009 42nd Hawaii International Conference on System Sciences · doi:10.1109/hicss.2009.345 · Cited by 159
Plug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility
Wirasingha, S. G., Schofield, N., & Emadi, A. (2008) · 2008 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2008.4677702 · Cited by 154 · cited 1×
“After more than one million HEV’s are driven on the road today, there is a growing interest on plug-in hybrid electric vehicles (PHEV’s), which is defined by IEEE-USA’s Energy Policy Committee as (1) a battery storage system of 4kWh or more, used to power the motion of the vehicle, (2) a means of recharging that batte…”
BackgroundAutomotive application of multi-phase coupled-inductor DC-DC converter
Czogalla, J., Li, J., & Sullivan, C. R. (2004) · 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003. · doi:10.1109/ias.2003.1257758 · Cited by 112 · cited 1×
“Several non-isolated bi-directional DCDC converters that are reported in literature [11-14] are shown in Fig.”
BackgroundThree-level buck converter for envelope tracking in RF power amplifiers
Yousefzadeh, V., Alarcón, E., & Maksimović, D. (2005) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2005.1453248 · Cited by 98 · cited 1×
“Three-level converters have been proposed for high DClink voltage applications [15-18].”
BackgroundKulshrestha, P., Wang, L., Chow, M., & Lukic, S. M. (2009) · IEEE Power Engineering Society General Meeting · doi:10.1109/pes.2009.5275688 · Cited by 95 · cited 1×
“An intelligent energy management system (iEMS) with wireless Zigbee communication platform can coordinate system operation [9].”
BackgroundSelf-citationUtilization and effect of plug-in hybrid electric vehicles in the United States power grid
Jenkins, S. D., Rossmaier, J. R., & Ferdowsi, M. (2008) · 2008 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2008.4677501 · Cited by 94 · cited 1×
“On the other hand, vehicle to grid (V2G) operation provides a potential solution of using PHEV batteries as energy storage devices for high penetration of distributed wind and solar power generations and smoothes their intermittent power [8].”
Background
Research works printed but not linked: 3
- shi, 2006, Three-Level DC-DC Converter: Four Switches Vsmax=Vin/2. TL Voltage Waveform before LC Filter, IEEE 2006 Power Electronics Specialists Conference
- 2009, The Global Outlook for PHEVs: Business Issues, Technology Issues, Key Players, and Market Forecasts, Pike Research Report
- 2008, Autos and Auto-Related, Plug in Hybrids: The Next Automotive Revolution, Morgan Stanley Report, 13
Cited by
Items 201–300 of 322
Arias-Londoño, A., A., J. D. S., Martínez, L. H., Isaza, R. A. H., & Echeverri, M. G. (2015) · IEEE PES Innovative Smart Grid Technologies Conference - Latin America (ISGT Latin America) · doi:10.1109/isgt-la.2015.7381218 · Cited by 5
“Some studies have estimated that over the year 2030 the proportion of EVs will reach 64% of the total of the light vehicles [4].”
BackgroundState-of-the-art Charging Solutions for Electric Transportation and Autonomous E-mobility
Singh, S. A., Ronanki, D., Praneeth, A. V. J. S., & Williamson, S. S. (2018) · Renewable Energy and Sustainable Development · doi:10.21622/resd.2018.04.1.002 · Cited by 5
“[4][5] The Society of Automobile Engineers (SAE) has included DC level I and level II charging in the J1772 standard [6].”
BackgroundManagement of an Electric Vehicle Charging System Supported by RES and Storage Systems
Pires, V. F., Roque, A., Sousa, D. M., & Margato, E. (2018) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2018.8445222 · Cited by 4
“There are several works describing solutions for charging systems under different specifications [5-8], since charging stations operating as gas stations today, are expected in the near future.”
BackgroundClosed-Loop Control Analysis of Interleaved Non-isolated Bidirectional DC-DC Converter
Jangir, P., Nidhi, N., & Kumar, R. (2017) · IEEE International WIE Conference on Electrical and Computer Engineering · doi:10.1109/wiecon-ece.2017.8468882 · Cited by 4
A ZVS Bidirectional Inverting Buck-Boost Converter Using Coupled Inductors
Cheng, X.-F., Zhang, Y., & Yin, C. (2018) · Electronics · doi:10.3390/electronics7100221 · Cited by 4
Two Switch Non-Isolated Quadratic Gain DC-DC Converters
Shahanasmol, H., Sreeja, C., & Mathew, S. (2020) · International Conference on Smart Systems and Inventive Technology (ICSSIT) · doi:10.1109/icssit48917.2020.9214232 · Cited by 4
“In a bidirectional converter, power flow can occur in source to load and also from load to source [3].”
BackgroundEMI generated by Power Electronic Interfaces in Smart Grids
Smoleński, R., Kempski, A., Bojarski, J. T., & Leżyński, P. (2012) · International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe) · doi:10.1109/emceurope.2012.6396771 · Cited by 4
Carstensen, C., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397271 · Cited by 4
“3, a 3 level buck converter [8] is depicted.”
BackgroundA novel high step-up ratio bi-directional DC-DC converter
Du, Y., Huang, A. Q., Wang, M., & Lukic, S. M. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165870 · Cited by 6
“The applications of particular interest are electric vehicles [5], electric vehicle charging infrastructure [6]-[8], renewable power generation systems [9], hybrid power sources [10].”
BackgroundSelf-citationA Symmetrical Boost Converter with Reduced Common-Mode Leakage Currents for EV Applications
Viana, C. C. D., Yakop, N., Frost, D. F., & Lehn, P. W. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215704 · Cited by 4
“Solutions introduced in literature can be divided into isolated [3, 4, 5] and nonisolated [5, 6] charging methods.”
BackgroundChrakie, A., Hassan, M. H. E., & Ghossein, N. E. (2026) · IEEE Access · doi:10.1109/access.2026.3686474 · Cited by 3
“Such systems’ theoretical foundations were given by Du et al. and Arancibia and Strunz, who offered DC microgrid based charging topologies with multiple DC-DC converters, renewable energy sources, and energy storage [13], [19].”
Firefly Optimized Interleaved Sepic Converter for EV Charging Applications
Kollati, S., Kishore, D. R., Mounika, K., Ajay, M., & Krishna, O. N. N. M. (2024) · International Conference on Innovative Sustainable Technologies for Energy, Mechatronics, and Smart Systems (ISTEMS) · doi:10.1109/istems60181.2024.10560235 · Cited by 3
“However, at the moment, EV sales are not increasing because of high battery costs, confusing charger designs, and inadequate charging infrastructure [4].”
BackgroundTechnological and Socio-Economic Review of Solar Based EV Charging Systems
Singh, K. P., Syal, P., & Bose, S. (2024) · IEEE International Conference on Power Electronics, Intelligent Control and Energy Systems · doi:10.1109/icpeices62430.2024.10719204 · Cited by 3
“Two-quadrant DC-DC converter is the basis of bidirectional DC charger [32].”
BackgroundDesign and Development of a Solar-Wind Hybrid Electric Vehicle Charging Station
Mandal, S., & De, S. (2024) · IEEE International Conference on Condition Assessment Techniques in Electrical Systems (CATCON) · doi:10.1109/catcon60527.2024.10831216 · Cited by 3
Kang, T., & Suh, Y. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310456 · Cited by 3
Kang, T., Chae, B., Kang, T., & Suh, Y. (2015) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2015.7167820 · Cited by 3
Bidirectional converter for single-cell Li-ion batteries in a small space vehicle
Macellari, M., Palmerini, G. B., & Schirone, L. (2012) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2012.6187247 · Cited by 3
“Among the proposed configurations, the requirement of high voltage diversity limits our interest to either the circuit proposed by [12] or the Three Levels Neutral Point Clamped (TLNPC) circuit [25].”
BackgroundCM voltage compensator for DC/DC converters
Smoleński, R., Jarnut, M., Bojarski, J. T., Blinov, A., & Vinnikov, D. (2013) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe.2013.6601167 · Cited by 3
Integration of Renewable Energy Sources into the Transportation and Electricity Sectors
Pathipati, V. K., Shafiei, A., Carli, G., & Williamson, S. S. (2016) · Springer eBooks · doi:10.1007/978-3-319-43651-7_3 · Cited by 3
Integration of Multiple Energy Storage Sections in Solar PV based HMGs using Multi-Input DAB
Nalamati, C. S., Agrawa, A., & Gupta, R. (2018) · IEEE International Conference on Power Electronics, Drives and Energy Systems · doi:10.1109/pedes.2018.8707522 · Cited by 3
“Lack of isolation and limited high voltage to low voltage conversion ratios, and increased device stress are the notified limitations [5]-[6].”
BackgroundDesign of quasi‐Z source converter for vehicle to vehicle to battery charging application
(Ashtankar), S. S., & Kadwane, S. G. (2022) · Energy Storage · doi:10.1002/est2.387 · Cited by 3
“ZSC/QZSC application extended to electric vehicle battery charging, smart grid, vehicle to grid battery charging, EV charging, fuel cell battery power, and municipal parking decks application, etc.(7-18) but until now there is no application of ZSC/QZSC mentioned on the concept of V2V battery charging.”
BackgroundA Review on Multi-Input DC-DC Converter and Its Controlling for Hybrid Power System
Narwaria, A., Swarnkar, P., & Gupta, S. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-19-0252-9_25 · Cited by 3
Analysis of a Novel High Power-Density Semiconductor-Level Interleaved Converter
Biajo, V. H. M., Lobato, G. C., & Silva, S. M. (2023) · IEEE Brazilian Power Electronics Conference and Southern Power Electronics Conference · doi:10.1109/spec56436.2023.10407546 · Cited by 3
“Reference [17] introduces the use of bi-directional DC-DC converters in a charging station for electric and hybrid vehicles.”
MethodA bidirectional multi-port DC-DC converter integrating voltage equalizer
Chen, J., Hou, S., Deng, F., & Chen, Z. (2015) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2015.7223058 · Cited by 3
“[9-14] study on multi-port dc-dc converters since it is a good choice to integrate many battery cells in storage systems.”
BackgroundThe issue of plug-in hybrid electric vehicles' grid integration and its control solution
Zhou, X., Li, J., Liang, Z., Huang, A. Q., & Bhattacharya, S. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617710 · Cited by 4
Self-citationPHEV charger model for active and reactive Power commands and its limitations
Fernandez, J. A., Riu, D. M., Bacha, S., Paupert, M., & Vernay, M. (2012) · IFAC Proceedings Volumes · doi:10.3182/20120902-4-fr-2032.00100 · Cited by 3
A bidirectional dc-ac converter
dos Santos, E. C. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6388692 · Cited by 3
Rankin, P., Ohn, S., Yu, J., Burgos, R. P., Boroyevich, D., Suryanarayana, H., & Belcastro, C. A. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557793 · Cited by 3
“This same topology has been used with success in other applications [1] [2] [3], but by utilizing a different switching sequence to minimize output current ripple rather than the synchronous switching method used by this converter.”
Methodda Silva, H. B., & Santiago, L. P. (2019) · Urban computing · doi:10.1007/978-3-030-12255-3_16 · Cited by 4
A Comparative Evaluation of Bidirectional Step-Up DC-DC Converters
Dahono, A., & Dahono, P. A. (2020) · International Journal on Electrical Engineering and Informatics · doi:10.15676/ijeei.2020.12.2.14 · Cited by 3
Hybrid Three-Phase Isolated DC-DC Converter Based on 5-Level NPC Topology
Gandomi, A. A., & Parsa, L. (2020) · IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon43393.2020.9255113 · Cited by 3
“In non-isolated converters, there is no galvanic isolation between input and output, therefore these converters may have lower weight, volume and power loss [2], [3].”
BackgroundTiwari, A., & Chowdhury, A. (2025) · Electrical Engineering · doi:10.1007/s00202-025-03205-5 · Cited by 2
“For example, the single-switch Luo converter simplifies control and lowers manufacturing costs, a key advantage for developing accessible charging infrastructure [13, 14].”
Powertrain selection for electric city bus based on the Multicriteria Decision Making
Ansari, M. N., Kannan, T., Joy, T., & Kumar, P. (2010) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2010.5606640 · Cited by 2
“The protection and cooling arrangement for four motor powertrain is more complex than two motor powertrain [28-31], [36-37].”
BackgroundHigh Frequency Three-phase 5-level T-type DC-DC Converter Using SiC MOSFETs
Gandomi, A. A., & Baskin, J. (2020) · International Symposium on Industrial Electronics · doi:10.1109/isie45063.2020.9152410 · Cited by 2
“In the non-isolated converters, there is no galvanic isolation between input and output and so these converters may have lower weight, volume and power loss due to absence of transformers [2], [3].”
BackgroundTransformer-Less Solar PV Inverter With Fuzzy Assisted MPPT for Standalone/ Grid Connected System
Thomas, F., & Mathew, J. (2020) · IEEE Recent Advances in Intelligent Computational Systems · doi:10.1109/raics51191.2020.9332489 · Cited by 2
Wang, X. (2023) · Highlights in Science Engineering and Technology · doi:10.54097/7rmk9c11 · Cited by 2
“2 The classification of DC-DC converter topologies [2] This paper introduces the DC/DC converters that are essential for electric vehicles, analyses the circuits and operating principles of different DC/DC converter topologies, compares and analyses the features, advantages and disadvantages of the…”
BackgroundSingle-phase and three-phase non-isolated bidirectional Dc-Dc-Ac converters
dos Santos, E. C., & Darabi, M. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520553 · Cited by 2
Zhou, X. (2011) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 2
Self-citationAnalysis and design of a three-level DC-DC converter with load adaptive ZVS auxiliary circuit
Das, P., Pahlevaninezhad, M., Mukherjee, A., Moschopoulos, G., & Jain, P. K. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647438 · Cited by 2
DC-DC-AC power converter for three-phase four-wire with bidirectional characteristic
Darabi, M., & dos Santos, E. C. (2013) · Brazilian Power Electronics Conference (COBEP) · doi:10.1109/cobep.2013.6785251 · Cited by 2
“The work presented in [3] brings a stateof-the-art of non-isolated bidirectional dc-dc converters for applications in hybrid electric vehicles.”
BackgroundA Design and Control of Rapid Electric Vehicle Charging System for Lithium-Ion Battery
Kang, T., Suh, Y., Park, H., Kang, B., & Kim, S. (2013) · The Transactions of the Korean Institute of Power Electronics · doi:10.6113/tkpe.2013.18.1.26 · Cited by 2
“The bi-directional converter may be transformer-isolated or non-isolated, depending on the application [8] .”
BackgroundCompensation of Interference Sources Inside Power Electronic Interfaces
Smoleński, R. (2012) · Power systems · doi:10.1007/978-1-4471-2960-8_5 · Cited by 2
Kang, T., Chae, B., Kang, T., & Suh, Y. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953415 · Cited by 2
A high performance bi-directional AC-DC converter for charge equalization
Tashakor, N., Farjah, E., Hosseini, S. R. K., & Ghanbari, T. (2016) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2016.7556866 · Cited by 2
“Furthermore, they can be categorized to on-board and offboard battery chargers with single phase, three phase or high voltage dc interfaces as input source [1], [3].”
BackgroundMultipurpose emulation platform for research in microgrids
Lledó-Ponsati, T., Montesinos‐Miracle, D., & Arellano, S. G. (2016) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2016.7695553 · Cited by 2
Configuration 5S: a bi-directional AC-DC converter
dos Santos, E. C. (2012) · Eletrônica de Potência · doi:10.18618/rep.2012.2.529537 · Cited by 2
A Novel Bidirectional DC/DC Converter with Wide Voltage Gain Range for Energy Storage Device
Wang, Z., Wang, P., & Bi, H. (2018) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac.2018.8590568 · Cited by 2
Analysis and Design of Hybrid Energy Storage Systems
García, J. (2020) · MDPI eBooks · doi:10.3390/books978-3-03928-687-4 · Cited by 3
Model Predictive Control of Dual-Buck Balancing Converters in DC Charging Stations
Sadiq, M., Hoang, L. Q. N., & Su, C. (2023) · IEEE IAS Global Conference on Emerging Technologies (GlobConET) · doi:10.1109/globconet56651.2023.10150138 · Cited by 2
A bidirectional power converter connecting electric vehicle battery and DC microgrid
Wijanarko, S., Hasyim, G. I., Furqani, J., Rizqiawan, A., Dahono, P. A., & Muqorobin, A. (2024) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v15.i2.pp978-992 · Cited by 2
“This voltage fluctuations of two sides in adjacent levels will cause voltage overlap, as discussed in [11]–[13].”
BackgroundMini-review on DC-DC Power Converters Used in V2X Battery Chargers
Bella, H., Rachid, A., Abbou, A., Errifai, N., Khamlichi, S., & Saidi, E. (2024) · Lecture notes in networks and systems · doi:10.1007/978-3-031-68650-4_46 · Cited by 2
Active and Reactive Power Control of Flexible Loads for Distribution-Level Grid Services
Wang, J. (2018) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/757 · Cited by 2
Architecture and control of an electric vehicle charging station using a bipolar DC bus
Iunnissi, S. A. R. (2021) · doi:10.32920/ryerson.14645229 · Cited by 2
A Critical Review and Analysis on Energy Storage Systems Applicable in Micro Grids
Singh, S. K., & Kumar, S. (2023) · International Journal for Research in Applied Science and Engineering Technology · doi:10.22214/ijraset.2023.49308 · Cited by 1
Weighting Factor-Free Model Predictive Control for Three-Level Buck Converters
Makhamreh, H., & Dyab, A. (2023) · Global Power, Energy and Communication Conference · doi:10.1109/gpecom58364.2023.10175673 · Cited by 1
“A detailed review paper on nonisolated bidirectional DC-DC converters suited for charge station applications can be found in [3].”
BackgroundDesign and Simulation of V2G Bidirectional Inverter and DC-DC Converter
Agatep, A., & Ung, M. (2011) · DigitalCommons - CalPoly (California State Polytechnic University) · Cited by 4
A novel three-level DC-DC converter with load adaptive ZVS auxiliary circuit
Das, P., Pahlevaninezhad, M., Moschopoulos, G., & Jain, P. K. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520182 · Cited by 1
Dargahi, S., Valizadeh, P., & Williamson, S. S. (2011) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2011.6043209 · Cited by 1
“Interleaved structure has also been suggested in this regard mainly to minimize the current ripple and reduce the magnetic component size [2].”
BackgroundKhan, M. A. (2015) · NCSU Libraries Repository (North Carolina State University Libraries) · Cited by 1
Protection and energy management of zero net electric energy clusters of buildings
Pandey, G. S., Singh, S. N., Rajpurohit, B. S., & Gonzalez-longatt, F. M. (2015) · Students Conference on Engineering and Systems · doi:10.1109/sces.2015.7506451 · Cited by 1
“The value of virtual resistance is calculated as per current sharing concept [4], [12].”
BackgroundControl of EV charging station based on three-phase three-level AC/DC rectifier
El-Zohri, E. H., & Sayed, K. (2015) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.2015.7572303 · Cited by 1
“To solve this problem, a variable frequency strategy is proposed [12].”
BackgroundMethodInfluentialA New ZVS Switched-Capacitor DC-DC Converter with Low Boost Inductance
Kim, J., Kim, S., Sagpazar, N. B., & Choi, S. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796884 · Cited by 1
Time-Sharing Duty Cycle-Based Concurrent Control for a Triple-Output Converter With Energy Storage
Kim, T., Wang, M., & Su, W. (2019) · IEEE Access · doi:10.1109/access.2019.2960041 · Cited by 1
“The non-isolated multi-port converter structures that include energy storage typically have a DC source, a battery, and DC output buses [12]–[14].”
BackgroundRule-Based Energy Management Strategy for Multi-energy Drive System
Yuan, Y., He, R., Zhao, H., Li, E., Li, X., & Xu, C. (2020) · Lecture notes in electrical engineering · doi:10.1007/978-981-15-2862-0_48 · Cited by 1
Luo, N., Wen, H., & Bu, Q. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367989 · Cited by 2
International Congress on Renewable Energy (I CORE 2021)
Subburaj, V., Dash, R. K., Reddy, J., & Raghu, C. N. (2022) · doi:10.13052/rp-9788770227537 · Cited by 1
Design of EV Charging Station with Integrated Renewable Energy Sources
Kumar, D. A., & Karuppiah, N. (2023) · Lecture notes in electrical engineering · doi:10.1007/978-981-99-4795-9_43 · Cited by 1
Ananth Angel, Z., & Kumar, S. S. (2024) · Energy Storage · doi:10.1002/est2.70042 · Cited by 1
Switch-Level Interleaved Converter: Circuit Operation, Output Ripple and Circulating Current
Biajo, V. H. M., Lobato, G. C., & Silva, S. M. (2024) · Eletrônica de Potência · doi:10.18618/rep.e202454 · Cited by 1
“Reference [17] introduces the use of bi-directional DC-DC converters in a charging station for electric and hybrid vehicles.”
Computationally Efficient Learning-Based Controller for Bidirectional Interleaved DC–DC Converter
Li, R., Feng, W., Qie, T., Liu, Y., Fernando, T. L., Iu, H. H., & Zhang, X. (2025) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2025.3526649 · Cited by 1
Malto, T. M. (2025) · IEEE International Conference on Electrical Energy Conversion Systems and Control (IEECSC) · doi:10.1109/ieecsc64206.2025.11100110 · Cited by 1
“1, the bidirectional DC-DC converter is also utilized in plug-in hybrid electric vehicle (PHEV) charging stations and smart grids [5].”
Contribution of evidence-similarity to target classification
Li, J., & Lan, J. (2012) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2012.6361023 · Cited by 1
An analysis of DC distribution systems
Ajitkumar, R. (2011) · SMARTech Repository (Georgia Institute of Technology) · Cited by 1
Integrated on-board battery chargers for EVs based on multiphase machines and power electronics
Subotić, I. (2016) · Liverpool John Moores University · doi:10.24377/ljmu.t.00004526 · Cited by 1
“Solutions employing a low frequency transformer on the grid side and non-isolated dc-dc converters are possible [Yu et al (2010)], but not typical.”
BackgroundBidirectional Power Transfer between Grid and Electric Vehicle Batteries
Habte, O. K. (2020) · NORA - Norwegian Open Research Archives · Cited by 2
Bidirectional embedded battery charger with V2G capabilities
Bhowmick, N. (2021) · theses.fr (ABES) · doi:10.70675/53dd6f5dz7a82z491ez805dz20bd5a7d99c9 · Cited by 2
Chhean, R.-N. M. (2012) · DigitalCommons - CalPoly (California State Polytechnic University) · doi:10.15368/theses.2012.214
Tabari, M. (2014) · Scholarship@Western (Western University)
An Integrated Bi-directional Automotive Charging System With Controller
Khan, G. M. Z. (2013) · Scholarship at UWindsor (University of Windsor)
Dargahi, S. (2012) · Spectrum Research Repository (Concordia University)
CM Voltage Compensators for Power Electronic Interfaces
Smoleński, R., Bojarski, J. T., Leżyński, P., Kempski, A., & Łuszcz, J. (2015) · IEEE Electromagnetic Compatibility Magazine · doi:10.1109/memc.2015.7098519
The return of investment analysis of a PHEV charging station with coordinated charging
He, D., Lin, W., Ntsama, P., & Harley, R. G. (2012) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2012.6388561
Optimization of "charging-parking" combined parking deck based on computer simulation
Zhang, Y., Lai, M., & Wu, H. (2011) · International Conference on E-Business and E-Government · doi:10.1109/icebeg.2011.5882625
BIDIRECTIONAL DC TO DC CONVERTER BASED DRIVE
Buvana, D., Jayashree, R., & Abdur, B. S. (2012)
Reduction Method of Recovery Current in a Bi-directional Chopper
Fujita, Y., Miyawaki, S., & Itoh, J. (2011)
Vehicle-to-Grid Interface and Electrical Infrastructure
Carli, G., Shafiei, A., Berthold, F., & Williamson, S. S. (2014) · Energy, power electronics, and machines series · doi:10.1201/b17506-17
Analysis on Typical Schemes of the Integration of EV Charging Facilities into the Grid
Li, C., Cao, Y., Kuang, Y., & Zhou, B. (2016) · Power systems · doi:10.1007/978-3-662-49364-9_6
Design of charging system based on three level structure for ultracapacitor light rail vehicles
Wu, Z. H., Liu, W. R., Huang, Z. W., Zhou, R., Gong, X. H., & Song, Y. (2016) · Chinese Control Conference (CCC) · doi:10.1109/chicc.2016.7554746
“Therefore, the linear adaptor is not suitable for ultracapacitor charging system[2].”
BackgroundAskarian, I., Pahlevani, M., & Bakhshai, A. (2015) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.2015.7572462
“Replacing (5) in (2), the condition (3) is recalculated as follows:”
BackgroundRegenerative Energy Control of DC Electric Railway Based on Solid State Transformer
Han, S.-G., Kim, H., & Park, J.-S. (2015) · International Journal of Control and Automation · doi:10.14257/ijca.2015.8.11.39
Implementation of Bidirectional LLC Resonant Converter for RES with Automatic Transition
Ajith Kumar, N., & Dhanalakshmi, R. (2017) · IJIREEICE · doi:10.17148/ijireeice.2017.5112
“Whereas the paper [2] has reviewed a non-isolated bidirectional dc–dc converters which finds application in plug-in hybrid electric vehicles with charging facilities with optimized operation of the converter by employing soft switching technique.”
BackgroundRoque, A., Pires, V. F., Pedraza, L., Margato, E., & Sousa, D. M. (2018) · Renewable Energy and Power Quality Journal · doi:10.24084/repqj16.444
Eltief, S., Matin, M. A., & Tifour, B. (2019) · doi:10.1117/12.2532074
Application of an improved harmonic detection algorithm in harmonic control of charging station
Kunfeng, Z. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1311/1/012007
Modeling and Design of a SiC Zero Common-Mode Voltage Three-Level DC/DC Converter
Rankin, P. (2019) · VTechWorks (Virginia Tech)
A High-Power High-Frequency Isolated DC Power Supply for Electric Vehicle Charging Application
Joshi, S., Patel, R. M., Patel, V. B., Trivedi, T., & Mistry, P. (2020) · Smart innovation, systems and technologies · doi:10.1007/978-981-15-1616-0_39
Simulation on modified hysteresis current control in half-bridge bidirectional DC-DC converter
Azwa, O. N., Hamdan, D., & Shafie, B. M. (2015) · UMP Institutional Repository (Universiti Malaysia Pahang)
Adaptive Hierarchical Control in V2G Integrated Micro-grids
Shakeel, F. M. (2021) · doi:10.11575/prism/38666 · Cited by 2
Metadata
- Authors
- Du, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A.
- Affiliations
- North Carolina State University (US)
- Venue
- 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2010-02
- Pages
- 1145-1151
- ISSN
- 1048-2334 (ISSN-L)
- OpenAlex
- W2158250329
- Cited by
- 314
- References
- 18
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 14 · 2023: 17 · 2022: 15 · 2021: 23 · 2020: 24 · 2019: 23 · 2018: 23 · 2017: 17 · 2016: 23 · 2015: 32 · 2014: 19 · 2013: 25 · 2012: 26
- FWCI
- 30.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Keywords
- plug-in hybrid electric vehicles, vehicle-to-grid, DC microgrid, half-bridge converter, three-level converter, converter efficiency, inductor size reduction, harmonic filtering, load balancing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.