Fault detection and classification in permanent magnet synchronous machines using Fast Fourier Transform and Linear Discriminant Analysis
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
The main objective of this paper is to propose a method to detect the presence of a fault in Permanent Magnet Synchronous Machines (PMSMs), determine the type of that fault and estimate the severity in the case of eccentricity fault. In this paper, three types of faults are discussed: static eccentricity, inter-turn short circuit, and demagnetization faults. The machine is controlled using a three phase current source and the harmonics of the stator voltage are used as detailed features for the classifier for fault detection. Two dimensional (2-D) Finite Element Analysis (FEA) is used to model and simulate the machine under healthy and faulty conditions. Fast Fourier Transform (FFT) analysis is performed to the phase voltage signal to detect the frequency spectrum and Linear Discriminant Analysis (LDA) is chosen as a classification method. To validate the method, two different types of PMSMs are tested: the first with a concentrated winding and the second with a series distributed winding. The tests are applied for different operation loads.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to [40], the frequency components, the amplitudes of which increase as a result of the failure of the stator winding, are calculated as follows:”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [40]
Citations
Cites
Permanent magnet motor technology : design and applications
Gieras, J. F., & Wing, M. (1996) · Thammasat University Digital Collections · Cited by 746
Classification, estimation, and pattern recognition
Young, T. Y., & Calvert, T. W. (1974) · International Linear Collider · Cited by 332
Espinosa, A. G., Rosero, J. A., Cusido, J., Romeral, L., & Ortega, J. A. (2010) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2009.2037922 · Cited by 243
Hong, J., Park, S., Hyun, D., Kang, T.-J., Lee, S. B., Kral, C., & Haumer, A. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2191253 · Cited by 219
Ebrahimi, B. M., & Faiz, J. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2050496 · Cited by 208
Thomson, W. T., & Barbour, A. (1998) · IEEE Transactions on Energy Conversion · doi:10.1109/60.736320 · Cited by 173
Briz, F., Degner, M. W., Zamarrón, A., & Guerrero, J. M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813746 · Cited by 132
Torkaman, H., Afjei, E. S., & Yadegari, P. (2012) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2012.2191619 · Cited by 79
Study on the Permanent Magnet Demagnetization Fault in Permanent Magnet Synchronous Machines
Rosero, J. A., Cusido, J., Garcia, A., Ortega, J. A., & Romeral, L. (2006) · IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics · doi:10.1109/iecon.2006.347598 · Cited by 67
The Internal Fault Analysis of Brushless DC Motors Based on the Winding Function Theory
Kim, T., Lee, H.-W., & Kwak, S. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2013246 · Cited by 65
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“According to [40], the frequency components, the amplitudes of which increase as a result of the failure of the stator winding, are calculated as follows:”
BackgroundChen, S., Yu, J., & Wang, S. (2020) · Journal of Process Control · doi:10.1016/j.jprocont.2020.01.004 · Cited by 189
Haddad, R. Z., & Strangas, E. G. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2016.2558183 · Cited by 158
“Here, we continue the work of [3].”
Self-citationDiscernment of Broken Magnet and Static Eccentricity Faults in Permanent Magnet Synchronous Motors
Goktas, T., Zafarani, M., & Akin, B. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2015.2512602 · Cited by 140
“The phase voltages to detect and classify the demagnetization and eccentricity faults [12] and the zero-sequence component of the phase voltages [13] to detect demagnetization fault are be used in PMSMs.”
MethodGomathy, V., & Selvaperumal, S. (2016) · Journal of Power Electronics · doi:10.6113/jpe.2016.16.3.1097 · Cited by 53
Metadata
- Authors
- Haddad, R. Z., & Strangas, E. G.
- Affiliations
- Michigan State University (US)
- Venue
- 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED)
- Publisher
- IEEE
- Published
- 2013-08
- Pages
- 99-104
- OpenAlex
- W1971826559
- Cited by
- 46
- References
- 15
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 2 · 2023: 2 · 2022: 5 · 2021: 3 · 2020: 7 · 2019: 6 · 2018: 1 · 2017: 3 · 2016: 7 · 2015: 7
- FWCI
- 6.37
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- permanent magnet synchronous motor, fault detection, fault classification, static eccentricity, inter-turn short circuit, demagnetization, linear discriminant analysis, fast Fourier transform, fault severity estimation, concentrated winding, distributed winding, finite element analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fault detection and classification in permanent magnet synchronous machines using Fast Fourier Transform and Linear Discriminant Analysis. https://app.cochat.ai/papers/10.1109/demped.2013.6645703
- The paper
- Haddad, R. Z., & Strangas, E. G. (2013). Fault detection and classification in permanent magnet synchronous machines using Fast Fourier Transform and Linear Discriminant Analysis. 2013 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED). https://doi.org/10.1109/demped.2013.6645703
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.