Evaluation of the switching characteristics of a gallium-nitride transistor
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Gallium-nitride (GaN) technology for power conversion is maturing, with a growing need to evaluate the capabilities of GaN devices in high switching frequency and elevated ambient temperature operation. These capabilities may particularly benefit systems constrained by strict EMI standards, due to the possibility of significant size and weight reduction. An inductive load tester circuit has been developed for switching characterization of a GaN transistor (EPC1010) and a paired silicon diode (SBR10U200P5). Maximum measured switching speeds for hard switching turn-on and turn-off transitions were dv/dt(on)= 4 V/ns, di/dt(on)= 4.5 A/ns, and dv/dt(off)= 18 V/ns, di/dt(off)= 5 A/ns respectively. Total measured switching energy loss was Etot= 40 μJ under 100 V supply voltage and 15 A load current conditions, with little change with increase of transistor junction temperature from 25 °C to 100 °C. Zero-voltage switching reduced loss to only Etot= 6 μJ, thus enabling high switching frequency operation. As the switching pair of a silicon diode and an EPC1010 is not suitable in hard switching mode and high switching frequency operation due to high switching loss of the turn-on process, another tester was built. Here, two EPC1010 devices were used in a phase-leg configuration. The fastest switching speeds were dv/dt(on)= 21 V/ns, di/dt(on)= 9 A/ns, and dv/dt(off)= 20 V/ns, di/dt(off)= 2 A/ns respectively. Total measured switching energy loss was Etot= 11 μJ, under 100 V supply voltage and 15 A load current conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
AlGaN/GaN HEMTs—An Overview of Device Operation and Applications
Mishra, U. K., Parikh, P., & Wu, Y.-F. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021567 · Cited by 2,312
Silicon carbide benefits and advantages for power electronics circuits and systems
Elasser, A., & Chow, T. P. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021562 · Cited by 537
Cited by
Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges
Jones, E. A., Wang, F. F., & Costinett, D. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2582685 · Cited by 1,259
Avenas, Y., Dupont, L., & Khatir, Z. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2178433 · Cited by 559
Stability, Reliability, and Robustness of GaN Power Devices: A Review
Kozak, J. P., Zhang, R., Porter, M., Song, Q., Liu, J., Wang, B., Wang, R., Saito, W., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3266365 · Cited by 441
Self-citationMethodology for Wide Band-Gap Device Dynamic Characterization
Zhang, Z., Guo, B., Wang, F. F., Jones, E. A., Tolbert, L. M., & Blalock, B. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2655491 · Cited by 287
Wang, H., Wei, J., Xie, R., Liu, C., Tang, G., & Chen, K. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2610460 · Cited by 283
Metadata
- Authors
- Danilovic, M., Chen, Z., Wang, R., Luo, F., Boroyevich, D., & Mattavelli, P.
- Venue
- 2011 IEEE Energy Conversion Congress and Exposition
- Publisher
- IEEE
- Published
- 2011-09
- Pages
- 2681-2688
- OpenAlex
- W2165878638
- Cited by
- 144
- References
- 2
- FWCI
- 29.46
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.