Analysis of the switching speed limitation of wide band-gap devices in a phase-leg configuration
The DOI matches its Crossref record.
Abstract
Advanced power semiconductor devices, especially wide band-gap devices, have inherent capability for fast switching. However, due to the limitation of gate driver capability and the interaction between two devices in a phase-leg during switching transient (cross talk), the switching speed is slower than expected in practical use. This paper focuses on identifying the key limiting factors for switching speed. The results provide the basis for improving gate drivers, eliminating interference, and boosting switching speed. Based on the EPC2001 Gallium Nitride transistor, both simulation and experimental results verify that the limiting factors in the gate loop include the pull-up (-down) resistance of gate driver, rise (fall) time and amplitude of gate driver output voltage; among these the rise (fall) time plays the primary role. Another important limiting factor of device switching speed is the spurious gate voltage induced by cross talk between two switches in a phase-leg. This induced gate voltage is not only determined by the switch speed, but also depends on the gate loop impedance, junction capacitance, and operating conditions of the complementary device.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges
Morya, A. K., Gardner, M. C., Anvari, B., Liu, L., Yepes, A. G., Doval-Gandoy, J., & Toliyat, H. A. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2892807 · Cited by 444
Methodology for Wide Band-Gap Device Dynamic Characterization
Zhang, Z., Guo, B., Wang, F. F., Jones, E. A., Tolbert, L. M., & Blalock, B. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2655491 · Cited by 287
Self-citationWang, H., Wei, J., Xie, R., Liu, C., Tang, G., & Chen, K. J. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2610460 · Cited by 283
Active Gate Driver for Crosstalk Suppression of SiC Devices in a Phase-Leg Configuration
Zhang, Z., Wang, F., Tolbert, L. M., & Blalock, B. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268058 · Cited by 278
Self-citationWide Bandgap Technologies and Their Implications on Miniaturizing Power Electronic Systems
Mantooth, H. A., Glover, M. D., & Shepherd, P. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2313511 · Cited by 264
A Review of High-Speed GaN Power Modules: State of the Art, Challenges, and Solutions
Emon, A. I., Mustafeez-ul-Hassan, Mirza, A. B., Kaplun, J., Vala, S. S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232265 · Cited by 151
Advances in Power Conversion and Drives for Shipboard Systems
Wang, F., Zhang, Z., Ericsen, T., Raju, R., Burgos, R., & Boroyevich, D. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2495331 · Cited by 135
Self-citationAdoption of wide bandgap technology in hybrid/electric vehicles-opportunities and challenges
Han, D., Li, S., Lee, W., & Sarlioglu, B. (2017) · 2017 IEEE Transportation Electrification Conference and Expo (ITEC) · doi:10.1109/itec.2017.7993332 · Cited by 34
Design and Optimization of 650V/60A Double-Sided Cooled Multichip GaN Module
Emon, A. I., Carlton, H., Harris, J., Krone, A., Mirza, A., Hassan, M., Yuan, Z., Huitink, D., & Luo, F. (2021) · 2021 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec42165.2021.9487307 · Cited by 11
Metadata
- Authors
- Zhang, Z., Zhang, W., Wang, F., Tolbert, L. M., & Blalock, B. J.
- Venue
- 2012 IEEE Energy Conversion Congress and Exposition (ECCE)
- Publisher
- IEEE
- Published
- 2012-09
- Pages
- 3950-3955
- OpenAlex
- W2088974470
- Cited by
- 132
- References
- 0
- FWCI
- 11.87
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.