The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
High-performance heat sinking for VLSI
Abstract
The problem of achieving compact, high-performance forced liquid cooling of planar integrated circuits has been investigated. The convective heat-transfer coefficient h between the substrate and the coolant was found to be the primary impediment to achieving low thermal resistance. For laminar flow in confined channels, h scales inversely with channel width, making microscopic channels desirable. The coolant viscosity determines the minimum practical channel width. The use of high-aspect ratio channels to increase surface area will, to an extent, further reduce thermal resistance. Based on these considerations, a new, very compact, water-cooled integral heat sink for silicon integrated circuits has been designed and tested. At a power density of 790 W/cm2, a maximum substrate temperature rise of 71°C above the input water temperature was measured, in good agreement with theory. By allowing such high power densities, the heat sink may greatly enhance the feasibility of ultrahigh-speed VLSI circuits.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Convective Heat and Mass Transfer
Kays, W. M., & Whitelaw, J. H. (1967) · Journal of Applied Mechanics · doi:10.1115/1.3607663 · Cited by 4,020
Kays, W. M., London, A. L., & Eckert, E. R. G. (1960) · Journal of Applied Mechanics · doi:10.1115/1.3644004 · Cited by 2,840
Anisotropic etching of silicon
Bean, K. E. (1978) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1978.19250 · Cited by 803
Field Assisted Glass-Metal Sealing
Wallis, G., & Pomerantz, D. I. (1969) · Journal of Applied Physics · doi:10.1063/1.1657121 · Cited by 746
Janz, G. J., Gardner, G. L., Krebs, U., & Tomkins, R. P. T. (1974) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253134 · Cited by 325
Physical limits in digital electronics
Keyes, R. W. (1975) · Proceedings of the IEEE · doi:10.1109/proc.1975.9825 · Cited by 301
Fundamental limits in digital information processing
Keyes, R. W. (1981) · Proceedings of the IEEE · doi:10.1109/proc.1981.11959 · Cited by 92
Cited by
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Laser, D. J., & Santiago, J. G. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/r01 · Cited by 1,848
Device scaling limits of Si MOSFETs and their application dependencies
Frank, D. J., Dennard, R. H., Nowak, E., Solomon, P. M., Taur, Y., & Wong, H.-S. P. (2001) · Proceedings of the IEEE · doi:10.1109/5.915374 · Cited by 1,572
The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture
Gad-el-Hak, M. (1999) · Journal of Fluids Engineering · doi:10.1115/1.2822013 · Cited by 1,318
Heat Transfer in Nanofluids—A Review
Das, S. K., Choi, S. U. S., & Patel, H. E. (2006) · Heat Transfer Engineering · doi:10.1080/01457630600904593 · Cited by 1,282
Metadata
- Authors
- Tuckerman, D. B., & Pease, R. F. W.
- Venue
- IEEE Electron Device Letters
- Published
- 1981-05
- Volume
- 2
- Issue
- 5
- Pages
- 126-129
- ISSN
- 0741-3106 (ISSN-L)
- 1558-0563
- OpenAlex
- W2156259175
- Cited by
- 5,291
- References
- 7
- FWCI
- 64.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.