The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
High-performance heat sinking for VLSI
Abstract
The problem of achieving compact, high-performance forced liquid cooling of planar integrated circuits has been investigated. The convective heat-transfer coefficient h between the substrate and the coolant was found to be the primary impediment to achieving low thermal resistance. For laminar flow in confined channels, h scales inversely with channel width, making microscopic channels desirable. The coolant viscosity determines the minimum practical channel width. The use of high-aspect ratio channels to increase surface area will, to an extent, further reduce thermal resistance. Based on these considerations, a new, very compact, water-cooled integral heat sink for silicon integrated circuits has been designed and tested. At a power density of 790 W/cm2, a maximum substrate temperature rise of 71°C above the input water temperature was measured, in good agreement with theory. By allowing such high power densities, the heat sink may greatly enhance the feasibility of ultrahigh-speed VLSI circuits.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Convective Heat and Mass Transfer
Kays, W. M., & Whitelaw, J. H. (1967) · Journal of Applied Mechanics · doi:10.1115/1.3607663 · Cited by 4,020
Kays, W. M., London, A. L., & Eckert, E. R. G. (1960) · Journal of Applied Mechanics · doi:10.1115/1.3644004 · Cited by 2,840
Anisotropic etching of silicon
Bean, K. E. (1978) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1978.19250 · Cited by 803
Field Assisted Glass-Metal Sealing
Wallis, G., & Pomerantz, D. I. (1969) · Journal of Applied Physics · doi:10.1063/1.1657121 · Cited by 746
Janz, G. J., Gardner, G. L., Krebs, U., & Tomkins, R. P. T. (1974) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253134 · Cited by 325
Physical limits in digital electronics
Keyes, R. W. (1975) · Proceedings of the IEEE · doi:10.1109/proc.1975.9825 · Cited by 301
Fundamental limits in digital information processing
Keyes, R. W. (1981) · Proceedings of the IEEE · doi:10.1109/proc.1981.11959 · Cited by 92
Cited by
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Laser, D. J., & Santiago, J. G. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/r01 · Cited by 1,848
Device scaling limits of Si MOSFETs and their application dependencies
Frank, D. J., Dennard, R. H., Nowak, E., Solomon, P. M., Taur, Y., & Wong, H.-S. P. (2001) · Proceedings of the IEEE · doi:10.1109/5.915374 · Cited by 1,572
The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture
Gad-el-Hak, M. (1999) · Journal of Fluids Engineering · doi:10.1115/1.2822013 · Cited by 1,318
Heat Transfer in Nanofluids—A Review
Das, S. K., Choi, S. U. S., & Patel, H. E. (2006) · Heat Transfer Engineering · doi:10.1080/01457630600904593 · Cited by 1,282
Co-designing electronics with microfluidics for more sustainable cooling
van Erp, R., Soleimanzadeh, R., Nela, L., Kampitsis, G., & Matioli, E. (2020) · Nature · doi:10.1038/s41586-020-2666-1 · Cited by 1,142
Qu, W., & Mudawar, I. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(01)00337-4 · Cited by 1,033
Banerjee, K., Souri, S. J., Kapur, P., & Saraswat, K. C. (2001) · Proceedings of the IEEE · doi:10.1109/5.929647 · Cited by 1,028
A critical review of traditional and emerging techniques and fluids for electronics cooling
Sohel Murshed, S. M., & Nieto de Castro, C. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.112 · Cited by 987
Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology
Kandlikar, S. G., & Grande, W. J. (2003) · Heat Transfer Engineering · doi:10.1080/01457630304040 · Cited by 960
Assessment of high-heat-flux thermal management schemes
Mudawar, I. (2001) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/6144.926375 · Cited by 939
He, Z., Yan, Y., & Zhang, Z. (2021) · Energy · doi:10.1016/j.energy.2020.119223 · Cited by 869
THERMAL TRANSPORT IN NANOFLUIDS
Eastman, J. A., Phillpot, S. R., Choi, S. U. S., & Keblinski, P. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.052803.090621 · Cited by 844
Investigation of heat transfer in rectangular microchannels
Lee, P.-S., Garimella, S. V., & Liu, D. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.11.019 · Cited by 829
On-chip cooling by superlattice-based thin-film thermoelectrics
Chowdhury, I., Prasher, R., Lofgreen, K., Chrysler, G., Narasimhan, S., Mahajan, R., Koester, D., Alley, R., & Venkatasubramanian, R. (2009) · Nature Nanotechnology · doi:10.1038/nnano.2008.417 · Cited by 821
Convective Heat and Mass Transfer
Ghiaasiaan, S. M. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9780511800603 · Cited by 788
Ebrahimi, K., Jones, G. F., & Fleischer, A. S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.007 · Cited by 779
Cooling of photovoltaic cells under concentrated illumination: a critical review
ROYNE, A., DEY, C., & MILLS, D. (2005) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.09.003 · Cited by 760
Convective heat transfer and flow friction for water flow in microchannel structures
Peng, X. F., & Peterson, G. P. (1996) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(95)00327-4 · Cited by 741
Bulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
State of the Art of High Heat Flux Cooling Technologies
Agostini, B., Fabbri, M., Park, J. E., Wojtan, L., Thome, J. R., & Michel, B. (2007) · Heat Transfer Engineering · doi:10.1080/01457630601117799 · Cited by 640
Fluid flow and heat transfer in wavy microchannels
Sui, Y., Teo, C. J., Lee, P. S., Chew, Y. T., & Shu, C. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.022 · Cited by 595
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Bowers, M. B., & Mudawar, I. (1994) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(94)90103-1 · Cited by 483
Limits to binary logic switch scaling-a gedanken model
Zhirnov, V. V., Cavin, R. K., Hutchby, J. A., & Bourianoff, G. I. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818324 · Cited by 482
Forced convective heat transfer across a pin fin micro heat sink
Peles, Y., Koşar, A., Mishra, C., Kuo, C.-J., & Schneider, B. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.03.017 · Cited by 473
Cooling performance of a microchannel heat sink with nanofluids
Jang, S. P., & Choi, S. U. S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.02.036 · Cited by 462
Heat and fluid flow in high-power LED packaging and applications
Luo, X., Hu, R., Liu, S., & Wang, K. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.05.003 · Cited by 460
Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Fedorov, A. G., & Viskanta, R. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(99)00151-9 · Cited by 446
Heat transfer for water flow in trapezoidal silicon microchannels
Qu, W., Mala, G. M., & Li, D. (2000) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00045-4 · Cited by 432
Drummond, K. P., Back, D., Sinanis, M. D., Janes, D. B., Peroulis, D., Weibel, J. A., & Garimella, S. V. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.10.015 · Cited by 427
Experimental investigation on liquid forced-convection heat transfer through microchannels
Wang, B. X., & Peng, X. F. (1994) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(94)90011-6 · Cited by 426
Heat sink optimization with application to microchannels
Knight, R. W., Hall, D. J., Goodling, J. S., & Jaeger, R. C. (1992) · IEEE Transactions on Components, Hybrids, and Manufacturing Technology · doi:10.1109/33.180049 · Cited by 409
Nanoparticles enhanced phase change materials (NePCMs)-A recent review
Tariq, S. L., Ali, H. M., Akram, M. A., Janjua, M. M., & Ahmadlouydarab, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115305 · Cited by 405
A COMPARATIVE ANALYSIS OF STUDIES ON HEAT TRANSFER AND FLUID FLOW IN MICROCHANNELS
Sobhan, C. B., & Garimella, S. V. (2001) · Microscale Thermophysical Engineering · doi:10.1080/10893950152646759 · Cited by 400
Single-phase liquid friction factors in microchannels
Steinke, M. E., & Kandlikar, S. G. (2006) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2006.01.016 · Cited by 392
Kandlikar, S. G. (2012) · Journal of Heat Transfer · doi:10.1115/1.4005126 · Cited by 389
Gunnasegaran, P., Mohammed, H. A., Shuaib, N. H., & Saidur, R. (2010) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2010.06.014 · Cited by 387
FRICTIONAL FLOW CHARACTERISTICS OF WATER FLOWING THROUGH RECTANGULAR MICROCHANNELS
Peng, X. F., Peterson, G. P., & Wang, B. X. (1994) · Experimental Heat Transfer · doi:10.1080/08916159408946484 · Cited by 381
Waldbaur, A., Rapp, H., Länge, K., & Rapp, B. E. (2011) · Analytical Methods · doi:10.1039/c1ay05253e · Cited by 381
Developing convective heat transfer in deep rectangular microchannels
Harms, T. M., Kazmierczak, M. J., & Gerner, F. M. (1999) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(98)10055-3 · Cited by 369
Influence of geometric parameters on flow and heat transfer performance of micro-channel heat sinks
Wang, H., Chen, Z., & Gao, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.039 · Cited by 363
Lin, L., Zhao, J., Lu, G., Wang, X.-D., & Yan, W.-M. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.05.013 · Cited by 356
Two-Phase Microchannel Heat Sinks: Theory, Applications, and Limitations
Mudawar, I. (2011) · Journal of Electronic Packaging · doi:10.1115/1.4005300 · Cited by 347
Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
Dixit, T., & Ghosh, I. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.024 · Cited by 339
Liquid transport in micron and submicron channels
Pfahler, J., Harley, J., Bau, H., & Zemel, J. (1990) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(89)80008-1 · Cited by 327
Forced convection and flow boiling heat transfer for liquid flowing through microchannels
Peng, X. F., & Wang, B.-X. (1993) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(93)90160-8 · Cited by 325
Heat transfer and fluid flow in microchannels
Mohiuddin Mala, G., Li, D., & Dale, J. D. (1997) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(96)00356-0 · Cited by 325
Development of heat sink device by using topology optimization
Koga, A. A., Lopes, E. C. C., Villa Nova, H. F., Lima, C. R. D., & Silva, E. C. N. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.05.007 · Cited by 320
Li, Y. F., Xia, G. D., Ma, D. D., Jia, Y. T., & Wang, J. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.022 · Cited by 316
Mohammed, H. A., Bhaskaran, G., Shuaib, N. H., & Saidur, R. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.031 · Cited by 314
Zhao, C., Cao, W., Dong, T., & Jiang, F. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.083 · Cited by 311
A review of the state-of-the-art in electronic cooling
Zhang, Z., Wang, X., & Yan, Y. (2021) · e-Prime - Advances in Electrical Engineering, Electronics and Energy · doi:10.1016/j.prime.2021.100009 · Cited by 310
Laminar fluid behavior in microchannels using micropolar fluid theory
Papautsky, I., Brazzle, J., Ameel, T., & Frazier, A. B. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(98)00261-1 · Cited by 301
Single-phase heat transfer in microchannels: The importance of scaling effects
Rosa, P., Karayiannis, T. G., & Collins, M. W. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.05.015 · Cited by 292
Single-Phase Liquid Friction Factors in Microchannels
Steinke, M. E., & Kandlikar, S. G. (2005) · ASME 3rd International Conference on Microchannels and Minichannels, Parts A and B · doi:10.1115/icmm2005-75112 · Cited by 289
Two-Phase Flow, Boiling, and Condensation: In Conventional and Miniature Systems
Ghiaasiaan, S. M. (2017) · Cambridge University Press eBooks · doi:10.1017/9781316597392 · Cited by 286
Heat Transfer in Microchannels—2012 Status and Research Needs
Kandlikar, S. G., Colin, S., Peles, Y., Garimella, S., Pease, R. F., Brandner, J. J., & Tuckerman, D. B. (2013) · Journal of Heat Transfer · doi:10.1115/1.4024354 · Cited by 285
Self-citation3D-ICE: Fast compact transient thermal modeling for 3D ICs with inter-tier liquid cooling
Sridhar, A., Vincenzi, A., Ruggiero, M., Brunschwiler, T., & Atienza, D. (2010) · 2010 IEEE/ACM International Conference on Computer-Aided Design (ICCAD) · doi:10.1109/iccad.2010.5653749 · Cited by 284
High Flux Heat Removal with Microchannels—A Roadmap of Challenges and Opportunities
Kandlikar, S. G. (2005) · Heat Transfer Engineering · doi:10.1080/01457630591003655 · Cited by 282
Finned Metal Foam Heat Sinks for Electronics Cooling in Forced Convection
Bhattacharya, A., & Mahajan, R. L. (2002) · Journal of Electronic Packaging · doi:10.1115/1.1464877 · Cited by 279
Numerical study of convective heat transfer of nanofluids: A review
Vanaki, S. M., Ganesan, P., & Mohammed, H. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.042 · Cited by 277
Aquasar: A hot water cooled data center with direct energy reuse
Zimmermann, S., Meijer, I., Tiwari, M. K., Paredes, S., Michel, B., & Poulikakos, D. (2012) · Energy · doi:10.1016/j.energy.2012.04.037 · Cited by 276
Three-dimensional numerical optimization of a manifold microchannel heat sink
Ryu, J. H., Choi, D. H., & Kim, S. J. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00443-x · Cited by 262
Xia, G. D., Jiang, J., Wang, J., Zhai, Y. L., & Ma, D. D. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.08.095 · Cited by 262
Influence of channel geometry on the performance of a counter flow microchannel heat exchanger
Hasan, M. I., Rageb, A. A., Yaghoubi, M., & Homayoni, H. (2009) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2009.01.004 · Cited by 260
Li, H., Ding, X., Meng, F., Jing, D., & Xiong, M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118638 · Cited by 256
Chip cooling with integrated carbon nanotube microfin architectures
Kordás, K., Tóth, G., Moilanen, P., Kumpumäki, M., Vähäkangas, J., Uusimäki, A., Vajtai, R., & Ajayan, P. M. (2007) · Applied Physics Letters · doi:10.1063/1.2714281 · Cited by 256
Nanofluid as a coolant for electronic devices (cooling of electronic devices)
Ijam, A., & Saidur, R. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.08.032 · Cited by 255
An experimental investigation of microchannel flow with internal pressure measurements
Kohl, M. J., Abdel-Khalik, S. I., Jeter, S. M., & Sadowski, D. L. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.030 · Cited by 254
Thermal–hydraulic performance of small scale micro-channel and porous-media heat-exchangers
Jiang, P.-X., Fan, M.-H., Si, G.-S., & Ren, Z.-P. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00169-1 · Cited by 253
A Practical Implementation of Silicon Microchannel Coolers for High Power Chips
Colgan, E. G., Furman, B., Gaynes, M., Graham, W. S., LaBianca, N. C., Magerlein, J. H., Polastre, R. J., Rothwell, M. B., Bezama, R. J., Choudhary, R., et al. (2007) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2007.897977 · Cited by 252
A review on microchannel heat exchangers and potential applications
Khan, M. G., & Fartaj, A. (2011) · International Journal of Energy Research · doi:10.1002/er.1720 · Cited by 232
Yang, D., Wang, Y., Ding, G., Jin, Z., Zhao, J., & Wang, G. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.211 · Cited by 235
Reversible electronic logic using switches
Merkle, R. C. (1993) · Nanotechnology · doi:10.1088/0957-4484/4/1/002 · Cited by 178
Andhare, R. S., Shooshtari, A., Dessiatoun, S. V., & Ohadi, M. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.133 · Cited by 106
van Erp, R., Kampitsis, G., & Matioli, E. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2959736 · Cited by 97
Forced air cooling by using manifold microchannel heat sinks
Kim, Y. H., Chun, W. C., Kim, J. T., Pak, B. C., & Baek, B. J. (1998) · KSME International Journal · doi:10.1007/bf02945732 · Cited by 58
Cooling Limits for GaN HEMT Technology
Won, Y., Cho, J., Agonafer, D., Asheghi, M., & Goodson, K. E. (2013) · 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) · doi:10.1109/csics.2013.6659222 · Cited by 57
The role of microchannel geometry selection on heat transfer enhancement in heat sinks: A review
Dash, B., Nanda, J., & Rout, S. K. (2022) · Heat Transfer · doi:10.1002/htj.22357 · Cited by 41
Microchannel cooling strategies for high heat flux (1 kW/cm2) power electronic applications
Jung, K. W., Kharangate, C. R., Lee, H., Palko, J., Zhou, F., Asheghi, M., Dede, E. M., & Goodson, K. E. (2017) · 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2017.7992457 · Cited by 39
Illán-Gómez, F., García-Cascales, J. R., Hidalgo-Mompeán, F., & López-Belchí, A. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.041 · Cited by 37
High power density air-cooled microchannel heat exchanger
Kwon, B., Maniscalco, N. I., Jacobi, A. M., & King, W. P. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.11.068 · Cited by 37
Embedded Microchannel Cooling for High Power-Density GaN-on-Si Power Integrated Circuits
Erp, R. V., Kampitsis, G., Nela, L., Ardebili, R. S., & Matioli, E. (2020) · 2020 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm45881.2020.9190356 · Cited by 33
Liu, X., Chen, H., Wang, X., & Kefayati, G. (2020) · Energies · doi:10.3390/en13051065 · Cited by 11
Ahmadi, V. E., Barestrand, H. A., Summers, J., & Yilmaz, C. (2026) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2026.107650 · Cited by 10
Metadata
- Authors
- Tuckerman, D. B., & Pease, R. F. W.
- Venue
- IEEE Electron Device Letters
- Published
- 1981-05
- Volume
- 2
- Issue
- 5
- Pages
- 126-129
- ISSN
- 0741-3106 (ISSN-L)
- 1558-0563
- OpenAlex
- W2156259175
- Cited by
- 5,291
- References
- 7
- FWCI
- 64.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.