The DOI matches its Crossref record; 7 of the 8 references it cites were found in a registry or an index.
An intelligent real-time vision system for surface defect detection
Abstract
In recent years, there is an increased need for quality control in the manufacturing sectors. In the steel making, the rolling operation is often the last process that significantly affects the bulk microstructure of the steel. The cost of having defects on rolled steel is high because it takes more than 5000 KW-Hr to produce a ton of steel. Early detection of defects can reduce product damage and manufacturing cost. This paper describes a real-time visual inspection system that uses support vector machine to automatically learn complicated defect patterns. Based on the experimental results generated from over one thousand images, the proposed system is found to be effective in detecting steel surface detects. The speed of the system for feature extraction and defect detection is less than 6 msec per one-megabyte image.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For long products, particularly wire rods, speed could be as high as 225 miles/h (100 m/s) [2].”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“First-order gradient filter followed by thresholding is more commonly used for edge localisation [2,44,46,59,76] due to its noise immunity characteristics compared to Laplacian.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Region growing has been employed [2,24,59,76], particularly after the use of gradient operators, to identify RoIs.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Spatial domain techniques are fast and easy to implement compared to wavelet-based methods, and they have been used in most of the papers where suitability for real-time operation have also been reported [2,24,26,35,46,58,59,61,76].”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“However, in [2], the use of horizontal gradient operator for detection of vertical edge of seam defects also simultaneously detected equal number of pseudo defects.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Based on seam defect characteristics being very thin and darker than background, seed points were identified and subsequent region growing step provided RoIs.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Thus, it has been widely used for separation of defects from pseudo defects in steel surfaces [2,5,44,47,65,67].”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Gaussian radial basis function (RBF) kernel function was found to be routinely used for steel surface defect classification [2,83,85].”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
In the citing paper
“Subsequently, accuracy from SVM classifier was found to be better than NN-BP classifier (94.4% against 90.8%) for a 306 test dataset for seam defect against pseudo defect for rod surface.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [2]
Citations
Cites
The Nature of Statistical Learning Theory
Vapnik, V. (2000) · Statistics for Engineering and Information Science · doi:10.1007/978-1-4757-3264-1 · Cited by 46,387
Advances in kernel methods: support vector learning
Schölkopf, B., Burges, C. J. C., & Smola, A. J. (1999) · doi:10.5555/299094 · Cited by 5,809
Intrusion detection using neural networks and support vector machines
Mukkamala, S., Janoski, G., & Sung, A. H. (2003) · doi:10.1109/ijcnn.2002.1007774 · Cited by 821
A Comparison of State-of-the-Art Classification Techniques with Application to Cytogenetics
Lerner, B., & Lawrence, N. D. (2001) · Neural Computing and Applications · doi:10.1007/s005210170016 · Cited by 29
A Comparative Study of Different Machine Learning Approaches for Decision Making
Kelemen, A., Liang, Y., & Franklin, S. (2005) · Cited by 23
An Empirical Comparison of Kernel Selection for Support Vector Machines.
Ali, A. B. M. S., & Abraham, A. (2002) · HIS eBooks · Cited by 18
SVM learning from large training data set
Murphey, Y. L., Chen, Z., Putrus, M., & Feldkamp, L. A. (2004) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2003.1224025 · Cited by 8
Self-citation
Flagged first, then by citations
1 of the 8 references couldn’t be matched to a known paper.
Cited by
Sorted by citations
State of the Art in Defect Detection Based on Machine Vision
Ren, Z., Fang, F., Yan, N., & Wu, Y. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-021-00343-6 · Cited by 896
A Generic Deep-Learning-Based Approach for Automated Surface Inspection
Ren, R., Hung, T., & Tan, K. C. (2018) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2017.2668395 · Cited by 485
Image-Based Surface Defect Detection Using Deep Learning: A Review
Bhatt, P. M., Malhan, R. K., Rajendran, P. S., Shah, B. C., Thakar, S., Yoon, Y. J., & Gupta, S. K. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4049535 · Cited by 392
Review of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
“In [2], defect detection was modelled as a nonlinear classification problem using a SVM with RBF as the kernel function.”
BackgroundMethodInfluentialRecent advances in surface defect inspection of industrial products using deep learning techniques
Zheng, X., Zheng, S., Kong, Y., & Chen, J. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-06592-8 · Cited by 287
A deep-learning-based approach for fast and robust steel surface defects classification
Fu, G., Sun, P., Zhu, W., Yang, J., Cao, Y., Yang, M. Y., & Cao, Y. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.05.005 · Cited by 271
Detecting cyber-physical attacks in CyberManufacturing systems with machine learning methods
Wu, M., Song, Z., & Moon, Y. B. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-017-1315-5 · Cited by 238
Xue-wu, Z., Yan-qiong, D., Yan-yun, L., Ai-ye, S., & Rui-yu, L. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.11.030 · Cited by 188
Usamentiaga, R., Lema, D. G., Pedrayes, O. D., & Garcia, D. F. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3151560 · Cited by 196
An End‐to‐End Steel Strip Surface Defects Recognition System Based on Convolutional Neural Networks
Yi, L., Li, G., & Jiang, M. (2017) · steel research international · doi:10.1002/srin.201600068 · Cited by 173
Automatic detection and classification of the ceramic tiles’ surface defects
Hanzaei, S. H., Afshar, A., & Barazandeh, F. (2016) · Pattern Recognition · doi:10.1016/j.patcog.2016.11.021 · Cited by 150
Infrared Thermal Imaging-Based Crack Detection Using Deep Learning
Yang, J., Wang, W., Lin, G., Li, Q., Sun, Y., & Sun, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2958264 · Cited by 144
Yan, H., Paynabar, K., & Shi, J. (2017) · Technometrics · doi:10.1080/00401706.2017.1346522 · Cited by 131
Self-citationDekhtiar, J., Durupt, A., Bricogne, M., Eynard, B., Rowson, H., & Kiritsis, D. (2018) · Computers in Industry · doi:10.1016/j.compind.2018.04.005 · Cited by 125
Research Progress of Visual Inspection Technology of Steel Products—A Review
Sun, X., Gu, J., Tang, S., & Li, J. (2018) · Applied Sciences · doi:10.3390/app8112195 · Cited by 109
Martins, L. A. O., Padua, F. L. C., & Almeida, P. E. M. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675519 · Cited by 101
A new lightweight deep neural network for surface scratch detection
Li, W., Zhang, L., Wu, C., Cui, Z., & Niu, C. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10335-8 · Cited by 97
Feature selection for surface defect classification of extruded aluminum profiles
Chondronasios, A., Popov, I., & Jordanov, I. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7514-3 · Cited by 84
Ortiz, A., Bonnin‐Pascual, F., & Garcia‐Fidalgo, E. (2016) · Sensors · doi:10.3390/s16122118 · Cited by 81
Steel Surface Defect Diagnostics Using Deep Convolutional Neural Network and Class Activation Map
Lee, S. Y., Tama, B. A., Moon, S. J., & Lee, S. (2019) · Applied Sciences · doi:10.3390/app9245449 · Cited by 75
Real-time defect detection on highly reflective curved surfaces
Rosati, G., Boschetti, G., Biondi, A., & Rossi, A. (2008) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2008.03.010 · Cited by 73
Bonnin‐Pascual, F., & Ortiz, A. (2019) · Ocean Engineering · doi:10.1016/j.oceaneng.2019.106420 · Cited by 66
Yun, J. P., Choi, S., Kim, J.-W., & Kim, S. W. (2009) · NDT & E International · doi:10.1016/j.ndteint.2009.01.007 · Cited by 67
Knowledge-driven intelligent quality problem-solving system in the automotive industry
Xu, Z., Dang, Y., & Munro, P. (2018) · Advanced Engineering Informatics · doi:10.1016/j.aei.2018.08.013 · Cited by 65
Qing-sheng, J., Tan, D., Li, Y., Ji, S., Cai, C., & Zheng, Q. (2019) · Applied Sciences · doi:10.3390/app10010087 · Cited by 65
Accurate and Efficient Inspection of Speckle and Scratch Defects on Surfaces of Planar Products
Kong, H., Yang, J., & Chen, Z. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2668438 · Cited by 55
Hoffmann, L. F. S., Bizarria, F. C. P., & Bizarria, J. W. P. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106559 · Cited by 68
Wang, Y., Xia, H., Yuan, X., Li, L., & Sun, B. (2018) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5238-0 · Cited by 61
Corrosion Detection for Automated Visual Inspection
Bonnin‐Pascual, F., & Ortiz, A. (2014) · InTech eBooks · doi:10.5772/57209 · Cited by 61
Defect Detection of Steel Surfaces with Global Adaptive Percentile Thresholding of Gradient Image
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2017) · Journal of The Institution of Engineers (India): Series B · doi:10.1007/s40031-017-0296-2 · Cited by 61
Convolutional Neural Network Based Surface Inspection System for Non-patterned Welding Defects
Park, J.-K., An, W.-H., & Kang, D. (2019) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-019-00074-4 · Cited by 61
Zhao, Y. J., Yan, Y. H., & Song, K. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9489-0 · Cited by 59
Real-time vision-based defect inspection for high-speed steel products
Yun, J. P., Choi, S., Seo, B., & Kim, S. W. (2008) · Optical Engineering · doi:10.1117/1.2957958 · Cited by 59
Zong, Y., Liang, J. T., Wang, H., Ren, M., Zhang, M., Li, W., Wang, L., & Ye, M. (2021) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2021.106633 · Cited by 58
A local annular contrast based real-time inspection algorithm for steel bar surface defects
Li, W.-B., Lu, C.-H., & Zhang, J.-C. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.03.007 · Cited by 54
Agarwal, K., Shivpuri, R., Zhu, Y., Chang, T.-S., & Huang, H. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.12.026 · Cited by 54
Self-citationDefect inspection system for steel wire rods produced by hot rolling process
Yun, J. P., Choi, D.-C., Jeon, Y.-J., Park, C., & Kim, S. W. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5397-8 · Cited by 50
Automated visual classification of frequent defects in flat steel coils
Medina, R., Gayubo, F., González-Rodrigo, L. M., Olmedo, D., Gómez-García-Bermejo, J., Zalama, E., & Perán, J. R. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3352-0 · Cited by 49
Machine Learning for Object Recognition in Manufacturing Applications
Yun, H., Kim, E., Kim, D. M., Park, H. W., & Jun, M. B. (2023) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00764-6 · Cited by 52
A fuzzy inference system applied to defect detection in flat steel production
Borselli, A., Colla, V., Vannucci, M., & Veroli, M. (2010) · IEEE International Conference on Fuzzy Systems (FUZZ-IEEE) · doi:10.1109/fuzzy.2010.5584036 · Cited by 47
A fast method of steel surface defect detection using decision trees applied to LBP based features
Aghdam, S. R., Amid, E., & Imani, M. F. (2012) · 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2012.6360951 · Cited by 46
Garfo, S., Muktadir, M., & Sun, Y. (2020) · Journal of Mechatronics and Robotics · doi:10.3844/jmrsp.2020.74.84 · Cited by 46
Gong, R., Wu, C., & Chu, M. (2018) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.11.018 · Cited by 44
Computer vision defect detection on unseen backgrounds for manufacturing inspection
Mezher, A. M., & Marble, A. E. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.122749 · Cited by 49
Few-shot learning for defect detection in manufacturing
Zajec, P., Rožanec, J. M., Theodoropoulos, S., Fontul, M., Koehorst, E., Fortuna, B., & Mladenić, D. (2024) · International Journal of Production Research · doi:10.1080/00207543.2024.2316279 · Cited by 48
Yazdchi, M. R., Mahyari, A. G., & Nazeri, A. (2008) · 2008 International Conference on Computational Intelligence for Modelling Control & Automation · doi:10.1109/cimca.2008.130 · Cited by 39
A lower envelope Weber contrast detection algorithm for steel bar surface pit defects
Li, W.-B., Lu, C., & Zhang, J. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.05.016 · Cited by 37
Li, K., Wang, X., & Ji, L. (2019) · International Conference on Artificial Intelligence and Advanced Manufacture (AIAM) · doi:10.1109/aiam48774.2019.00136 · Cited by 37
Zhao, Q.-J., Cao, P., & Tu, D.-W. (2014) · Advances in Manufacturing · doi:10.1007/s40436-014-0057-2 · Cited by 35
An imbalanced small sample slab defect recognition method based on image generation
Fu, T., Li, P., & Liu, S. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.03.028 · Cited by 37
Intrusion Detection System for Cyber-Manufacturing System
Wu, M., & Moon, Y. B. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4042053 · Cited by 34
Real-Time Defects Detection Algorithm For High-Speed Steel Bar In Coil
Choi, S. H., Yun, J. P., Seo, B., Park, Y., & Kim, S. (2007) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1333681 · Cited by 34
Synthetic Data Augmentation Using GAN For Improved Automated Visual Inspection
Rožanec, J. M., Zajec, P., Theodoropoulos, S., Koehorst, E., Fortuna, B., & Mladenić, D. (2023) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2023.10.817 · Cited by 34
Fu, G., Jia, S., Zhu, W., Yang, J., Cao, Y., Yang, M. Y., & Cao, Y. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109109 · Cited by 34
ACD‐YOLO: Improved YOLOv5‐based method for steel surface defects detection
Fan, J., Wang, M., Li, B., Liu, M., & Shen, D. (2023) · IET Image Processing · doi:10.1049/ipr2.12983 · Cited by 31
Oh, Y., Ransikarbum, K., Busogi, M., Kwon, D., & Kim, N. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.03.020 · Cited by 31
Detection of Cracks and Corrosion for Automated Vessels Visual Inspection
Bonnín-Pascual, F., & Ortiz, A. (2010) · International Conference of the Catalan Association for Artificial Intelligence · doi:10.3233/978-1-60750-643-0-111 · Cited by 36
Huang, Q., Zhang, F., Zhao, Y., & Duan, J. (2025) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2025.110121 · Cited by 30
Curt, J., Capaldo, M., François Hild, A., & Roux, S. (2021) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2021.106842 · Cited by 30
Multiscale image quality measures for defect detection in thin films
Tolba, A. S., & Raafat, H. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6758-7 · Cited by 27
A Review and Benchmark on State-of-the-Art Steel Defects Detection
Chazhoor, A. A. P., Ho, E. S. L., Gao, B., & Woo, W. L. (2023) · SN Computer Science · doi:10.1007/s42979-023-02436-2 · Cited by 36
Ortiz, A., Bonnin‐Pascual, F., Garcia‐Fidalgo, E., & Joan P. Company (2015) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-27149-1_18 · Cited by 27
Steel Surface Defect Classification Based on Discriminant Manifold Regularized Local Descriptor
Zhao, J., Peng, Y., & Yan, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2881962 · Cited by 26
Park, K.-B., & Lee, J. Y. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac115 · Cited by 30
Ragab, K. (2023) · Sensors · doi:10.3390/s23010544 · Cited by 24
E-quality control: A support vector machines approach
Tseng, T.-L., Aleti, K. R., Hu, Z., & Kwon, Y. J. (2015) · Journal of Computational Design and Engineering · doi:10.1016/j.jcde.2015.06.010 · Cited by 25
Analysis of the Surface Defects in a Hot-Rolled Low-Carbon C–Mn Steel Plate
Sarkar, P. P., Dhua, S. K., Thakur, S. K., & Rath, S. (2017) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-017-0281-8 · Cited by 25
Real-time system for automatic cold strip surface defect detection
Kostenetskiy, P., Alkapov, R., Vetoshkin, N., Chulkevich, R., Napolskikh, I., & Poponin, O. (2019) · FME Transactions · doi:10.5937/fmet1904765k · Cited by 23
A computer vision system for automatic steel surface inspection
Liu, Y.-C., Hsu, Y.-L., Sun, Y.-N., Tsai, S.-J., Ho, C.-Y., & Chen, C.-M. (2010) · 2010 5th IEEE Conference on Industrial Electronics and Applications · doi:10.1109/iciea.2010.5515197 · Cited by 23
Detection of line defects in steel billets using undecimated wavelet transform
Yun, J. P., Choi, S., Jeon, Y.-J., Choi, D.-C., & Kim, S. W. (2008) · 2008 International Conference on Control, Automation and Systems · doi:10.1109/iccas.2008.4694506 · Cited by 21
An EA-based pruning on improved YOLOv3 for rapid copper elbow surface defect detection
Xian, Y., Yu, Y., Lian, Y., Fan, J., & Wang, Z. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.106412 · Cited by 21
Development of Real-time Defect Detection Algorithm for High-speed Steel Bar in Coil(BIC)
Yun, J., Park, Y., Seo, B., Kim, S., Choi, S. W., Park, C., Bae, H., & Hwang, H. W. (2006) · SICE-ICASE International Joint Conference · doi:10.1109/sice.2006.314680 · Cited by 21
Bagnoli, C., Bravin, A., Massaro, M., & Vignotto, A. (2018) · Studi e ricerche · doi:10.30687/978-88-6969-286-4 · Cited by 17
Boudiaf, A., Harrar, K., Benlahmidi, S., Zaghdoudi, R., Ziani, S., & Taleb, S. (2022) · International Conference on Image and Signal Processing and their Applications (ISPA) · doi:10.1109/ispa54004.2022.9786361 · Cited by 17
Defects Detection of Billet Surface Using Optimized Gabor Filters
Yun, J. P., Choi, S. H., Seo, B., Park, C. H., & Kim, S. W. (2008) · IFAC Proceedings Volumes · doi:10.3182/20080706-5-kr-1001.00012 · Cited by 16
(2007) · Cited by 16
Modeling and recognition of steel-plate surface defects based on a new backward boosting algorithm
Hu, L., Zhou, M., Xiang, F., & Feng, Q. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1113-4 · Cited by 16
Peña, D. G., Pérez, D. G., Díaz, I., & Juárez, J. M. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14069-7 · Cited by 17
The study on real-time data processing based on CCD scanning and detecting device on FPGA
Xu, G. (2009) · IEEE International Conference on Intelligent Computing and Intelligent Systems (ICIS) · doi:10.1109/icicisys.2009.5358238 · Cited by 15
Wang, C., D’Amato, R., & Gómez, E. (2019) · Measurement · doi:10.1016/j.measurement.2019.01.043 · Cited by 15
(2009) · 2009 ICCAS-SICE · Cited by 15
Defect Detection Algorithm in Steel Billets Using Morphological Top-Hat filter
Lee, D., Kang, Y., Park, C., & Won, S. (2009) · IFAC Proceedings Volumes · doi:10.3182/20091014-3-cl-4011.00038 · Cited by 14
Borselli, A., Colla, V., & Vannucci, M. (2011) · doi:10.2316/p.2011.717-068 · Cited by 14
Composite score for anomaly detection in imbalanced real-world industrial dataset
Bougaham, A., Adoui, M. E., Linden, I., & Frénay, B. (2023) · Machine Learning · doi:10.1007/s10994-023-06415-9 · Cited by 13
Parallel Dilated CNN for Detecting and Classifying Defects in Surface Steel Strips in Real-Time
Ragab, K. (2021) · Lecture notes in networks and systems · doi:10.1007/978-3-030-82193-7_11 · Cited by 13
Yun, J. P., Jeon, Y.-J., Choi, D.-C., & Kim, S. W. (2012) · Journal of the Optical Society of America A · doi:10.1364/josaa.29.000797 · Cited by 13
Defect detection algorithm for high speed inspection in machine vision
Iyshwerya, K., Janani, B., Krithika, S., & Manikandan, T. (2013) · International Conference on Smart Structures and Systems (ICSSS) · doi:10.1109/icsss.2013.6623010 · Cited by 12
A method of steel strip image segmentation based on local gray information
Yang, S.-S., He, Y.-H., Wang, Z.-L., & Zhao, W.-S. (2008) · 2008 IEEE International Conference on Industrial Technology · doi:10.1109/icit.2008.4608646 · Cited by 11
Real-Time Curvature Defect Detection on Outer Surfaces Using Best-Fit Polynomial Interpolation
Golkar, E., Prabuwono, A. S., & Patel, A. (2012) · Sensors · doi:10.3390/s121114774 · Cited by 11
Tout, K., Cogranne, R., & Retraint, F. (2017) · Signal Processing · doi:10.1016/j.sigpro.2017.10.030 · Cited by 10
Enhanced You Only Look Once X for surface defect detection of strip steel
Wu, R., Zhou, F., Li, N., Liu, H., Guo, N., & Wang, R. (2022) · Frontiers in Neurorobotics · doi:10.3389/fnbot.2022.1042780 · Cited by 10
Vertical scratch detection algorithm for high-speed scale-covered steel BIC(Bar in Coil)
Yun, J. P., Park, C., Bae, H., Hwang, H., & Choi, S. (2010) · ICCAS 2010 · doi:10.1109/iccas.2010.5670190 · Cited by 10
Inspection of metallic surfaces using Local Binary Patterns
Mansano, M. D. R., Pavesi, L., Oliveira, L. S., Britto, A., & Koerich, A. L. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119655 · Cited by 10
Real-Time Steel Inspection System Based on Support Vector Machine and Multiple Kernel Learning
Chen, Y., Chen, L., Liu, X., Ding, S., & Zhang, H. (2011) · Advances in Intelligent and Soft Computing · doi:10.1007/978-3-642-25658-5_21 · Cited by 9
Rani, A., Ortíz-Arroyo, D., & Durdevic, P. (2024) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2024.108921 · Cited by 10
Chen, D., Zhang, J., Jiao, Z., Lei, H., Ma, J., Wu, L., & Zhong, Z. (2024) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2024.109148 · Cited by 9
A defect detection system of glass tube yarn based on machine vision
Bao, J., Jing, J., & Xie, Y. (2023) · Journal of Industrial Textiles · doi:10.1177/15280837231152878 · Cited by 9
Huang, H., Hu, C., Wang, T., Zhang, L., Li, F., & Guo, P. (2017) · IEEE International Conference on Information and Automation (ICIA) · doi:10.1109/icinfa.2017.8078936 · Cited by 9
Industry 4.0: Intelligent Quality Control and Surface Defect Detection
Johnson, V. C., Bali, J. S., Kolanur, C. B., & Tanvashi, S. (2022) · 3C Empresa Investigación y pensamiento crítico · doi:10.17993/3cemp.2022.110250.214-220 · Cited by 9
Continual learning for surface defect segmentation by subnetwork creation and selection
Dekhovich, A., & Bessa, M. A. (2024) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02393-4 · Cited by 11
Metadata
- Authors
- Jia, H., Murphey, Y. L., Shi, J., & Chang, T.-S.
- Affiliations
- University of Michigan (US)
- OG Technologies (United States) (US)
- Venue
- Proceedings of the 17th International Conference on Pattern Recognition, 2004. ICPR 2004.
- Publisher
- IEEE
- Published
- 2004
- Pages
- 239-242 Vol.3
- ISSN
- 1041-3278 (ISSN-L)
- OpenAlex
- W4250878893
- Cited by
- 174
- References
- 8
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 9 · 2023: 16 · 2022: 17 · 2021: 13 · 2020: 3 · 2019: 14 · 2018: 12 · 2017: 12 · 2016: 7 · 2015: 6 · 2014: 5 · 2013: 8 · 2012: 7
- FWCI
- 2.99
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Proceedings - International Conference on Pattern Recognition/Proceedings/International Conference on Pattern Recognition (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- surface defect detection, rolled steel, real-time visual inspection, support vector machine, feature extraction, steel quality control, image processing
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
