The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
A new IPT magnetic coupler for electric vehicle charging systems
Abstract
Inductive Power Transfer (IPT) is a practical method for recharging Electric Vehicles (EVs) because is it safe, efficient and convenient. Couplers or Power Pads are the power transmitters and receivers used with such contactless charging systems. Due to improvements in power electronic components, the performance and efficiency of an IPT system is largely determined by the coupling or flux linkage between these pads. Conventional couplers are based on circular pad designs and due to their geometry have fundamentally limited magnetic flux above the pad. This results in poor coupling at any realistic spacing between the ground pad and the vehicle pickup mounted on the chassis. Performance, when added to the high tolerance to misalignment required for a practical EV charging system, necessarily results in circular pads that are large, heavy and expensive. A new pad topology termed a flux pipe is proposed in this paper that overcomes difficulties associated with conventional circular pads. Due to the magnetic structure, the topology has a significantly improved flux path making more efficient and compact IPT charging systems possible.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationHui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
The design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationLiu, X., & Hui, S. (2007) · IEEE transactions on power electronics · doi:10.1109/tpel.2007.909301 · Cited by 159
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Design and optimisation of magnetic structures for lumped Inductive Power Transfer systems
Budhia, M., Covic, G. A., & Boys, J. T. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316197 · Cited by 108
Self-citationTechnology Improvement Pathways to Cost-effective Vehicle Electrification
Brooker, A., Thornton, M. J., & Rugh, J. P. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-0824 · Cited by 94
A multi-resonant converter for non-contact charging with electromagnetic coupling
Laouamer, R., Brunello, M., Ferrieux, J.-P., Normand, O., & Buchheit, N. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1997.671998 · Cited by 90
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Self-citationA Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Metadata
- Authors
- Budhia, M., Covic, G., & Boys, J.
- Venue
- IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society
- Publisher
- IEEE
- Published
- 2010-11
- Pages
- 2487-2492
- ISSN
- 1553-572X (ISSN-L)
- OpenAlex
- W2052797120
- Cited by
- 268
- References
- 14
- FWCI
- 11.79
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new IPT magnetic coupler for electric vehicle charging systems. https://app.cochat.ai/papers/10.1109/iecon.2010.5675350
- The paper
- Budhia, M., Covic, G., & Boys, J. (2010). A new IPT magnetic coupler for electric vehicle charging systems. IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society. https://doi.org/10.1109/iecon.2010.5675350
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.