The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Defect detection of steel surface using entropy segmentation
Abstract
Today, because of high manufacturing speed in steel industry, there is a need of fast and accurate detection of steel defect for quality assurance of product. Unlike other papers on defect detection of steel surface based on entropy this paper presents a new pre-processing and processing algorithm. The method presented here overcomes the limitations of traditional segmentation method or adaptive segmentation method like Otsu's method. This paper presents a new defect detection algorithm based on entropy. As a pre-processing step illumination compensation of image has been introduced using inverse illumination to remove non-uniformity of light intensity in the image. In the second part Local entropy of image has been used to detect the region of defect. The paper also suggests the concept of dynamic updation which helps to find a good background i.e. ideal steel surface and provides an effective method to classify the defects in its initial stage into defective and non-defective image. Background subtraction method is then used to extract the defective portion of image from the entropy image by comparing the entropy of image with the entropy of background image. Histogram thresholding method has been introduced to separate the background and defective portion in the background subtracted image to get the segmented image. The method was successfully tested on three kinds of defect on steel surface i.e. water droplet, blister and scratch.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Digital Image Processing: An Algorithmic Introduction using Java
Burger, W., & Burge, M. J. (2008) · Texts in Computer Science · doi:10.1007/978-1-84628-968-2 · Cited by 1,540
Automated surface inspection for statistical textures
Tsai, D.-M., & Huang, T.-Y. (2003) · Image and Vision Computing · doi:10.1016/s0262-8856(03)00007-6 · Cited by 217
Steel Surface Defect Detection Using Texture Segmentation Based on Multifractal Dimension
Yazdchi, M., Yazdi, M., & Mahyari, A. G. (2009) · 2009 International Conference on Digital Image Processing · doi:10.1109/icdip.2009.68 · Cited by 65
Surface defects inspection of cold rolled strips based on neural network
Kang, G.-W., & Liu, H.-B. (2005) · 2005 International Conference on Machine Learning and Cybernetics · doi:10.1109/icmlc.2005.1527830 · Cited by 62
(2000) · doi:10.1109/kes.2000.885769 · Cited by 45
Yazdchi, M. R., Mahyari, A. G., & Nazeri, A. (2008) · 2008 International Conference on Computational Intelligence for Modelling Control & Automation · doi:10.1109/cimca.2008.130 · Cited by 39 · cited 6×
“In section 5, appropriate features are extracted using Entropy [6].”
MethodInfluentialDesign of online surface inspection system of hot rolled strips
Wu, G., Kwak, H., Jang, S., Xu, K., & Xu, J. (2008) · 2008 IEEE International Conference on Automation and Logistics · doi:10.1109/ical.2008.4636548 · Cited by 38 · cited 1×
“One important way to improve the quality of the end product is to inspect the output of each manufacturing process [1], [2].”
BackgroundDevelopment of Defect Classification Algorithm for POSCO Rolling Strip Surface Inspection System
Choi, K., Koo, K., & Lee, J. (2006) · 2006 SICE-ICASE International Joint Conference · doi:10.1109/sice.2006.314681 · Cited by 30
Weiwei, L., Yunhui, Y., Jun, L., Yao, Z., & Hongwei, S. (2008) · 2008 Second International Symposium on Intelligent Information Technology Application · doi:10.1109/iita.2008.67 · Cited by 23
Wu, G., Zhang, H., Sun, X., Xu, J., & Xu, K. (2007) · 2007 IEEE International Conference on Automation and Logistics · doi:10.1109/ical.2007.4338916 · Cited by 21
Research works printed but not linked: 2
- gonzalez, 2008, Digital Image Processing
- zhao, 2010, The cold rolling strip surface defect on-line inspection system based on machine vision, second pacific-asia conference on ieee circuits, Communications and System (PACCS), 402
Cited by
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
Review of surface defect detection of steel products based on machine vision
Tang, B., Chen, L., Sun, W., & Lin, Z. (2023) · IET Image Processing · doi:10.1049/ipr2.12647 · Cited by 271
A novel deep convolutional neural network algorithm for surface defect detection
Zhang, D., Hao, X., Liang, L., Liu, W., & Qin, C. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac071 · Cited by 134
Cross Position Aggregation Network for Few-Shot Strip Steel Surface Defect Segmentation
Feng, H., Song, K., Cui, W., Zhang, Y., & Yan, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3246519 · Cited by 112
Zhong, H., Fu, D., Xiao, L., Zhao, F., Liu, J., Hu, Y., & Wu, B. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102437 · Cited by 64
Metadata
- Authors
- Nand, G. K., Noopur, & Neogi, N.
- Affiliations
- Birla Institute of Technology, Mesra (IN)
- Venue
- 2014 Annual IEEE India Conference (INDICON)
- Publisher
- IEEE
- Published
- 2014-12
- Pages
- 1-6
- OpenAlex
- W2094158905
- Cited by
- 44
- References
- 14
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 8 · 2023: 8 · 2022: 5 · 2021: 2 · 2020: 4 · 2019: 2 · 2018: 3 · 2017: 2 · 2016: 2
- FWCI
- 2.86
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE India Conference (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- steel surface defect detection, image segmentation, local entropy, illumination compensation, background subtraction, histogram thresholding, scratch defects, quality assurance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Defect detection of steel surface using entropy segmentation. https://app.cochat.ai/papers/10.1109/indicon.2014.7030439
- The paper
- Nand, G. K., Noopur, & Neogi, N. (2014). Defect detection of steel surface using entropy segmentation. 2014 Annual IEEE India Conference (INDICON). https://doi.org/10.1109/indicon.2014.7030439
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.