CoChat

Scaling walls: Applying dry adhesives to the real world

Hawkes, Elliot W., Ulmen, John, Esparza, Noe, Cutkosky, Mark R. · 2011 · 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems
Cited by 39

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

We present two foot mechanisms that allow relatively large patches of synthetic fibrillar dry adhesives applied inexactly by a climbing robot to perform at levels previously obtained only for small samples in precisely aligned and controlled bench-top tests. The mechanisms are inspired by the structures found in the toes of the gecko. The first mechanism uses ankles with roll and yaw flexures and a compliant structure behind the adhesive material to achieve approximately uniform pressures under nominal loading conditions on flat and curved surfaces. The second design uses a tendon-supported structure to achieve uniform loading and prevent premature peeling failures despite significant misalignment with a flat wall surface. The two designs are demonstrated on Stickybot III, an approximately 1 kg climbing robot, and can be scaled to larger areas and loads by tiling the basic structure.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/iros.2011.6095103

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

See all 39

Metadata

Authors
Hawkes, E. W., Ulmen, J., Esparza, N., & Cutkosky, M. R.
Venue
2011 IEEE/RSJ International Conference on Intelligent Robots and Systems
Publisher
IEEE
Published
2011-09
Pages
5100-5106
OpenAlex
W2147090047
Cited by
39
References
6
FWCI
11.62
Type
conference paper
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Scaling walls: Applying dry adhesives to the real world. https://app.cochat.ai/papers/10.1109/iros.2011.6095103
The paper
Hawkes, E. W., Ulmen, J., Esparza, N., & Cutkosky, M. R. (2011). Scaling walls: Applying dry adhesives to the real world. 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems. https://doi.org/10.1109/iros.2011.6095103

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.