Optimal Control of Traction Motor Drives Under Electrothermal Constraints
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Peak torque and power density requirements for traction motor drives continue to increase, while demands on reliability are getting increasingly stringent as well. With the knowledge that most of the failure mechanisms are related to excessive temperature (cycling), thermal management is a key for increasing performance, without jeopardizing reliability. This paper proposes a control strategy for active thermal management of permanent magnet synchronous motor (PMSM) drives, based on real-time estimation and feedback of switching device and motor temperatures. By regulating the switching frequency and current control limit, critical components can be safeguarded from excessive temperature rise. Furthermore, optimal dq-current control vectors are calculated within the temperature and voltage constraints, to maximize the drive's efficiency and speed-torque envelope. Hence, the control strategy enables the drivetrain to operate safely at maximum attainable performance limits. The strategy is experimentally validated on an 11-kW PMSM drive for a number of representative vehicle loads, including a maximum standstill torque test, a maximum acceleration test, and a driving cycle test.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“improve performance without jeopardizing reliability [5].”
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278 · cited 1×
“with mechanical stress models or physics-of-failure based models for in-service condition monitoring [24], [25].”
MethodReliability Prediction for Inverters in Hybrid Electrical Vehicles
Hirschmann, D., Tissen, D., Schroder, S., & De Doncker, R. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909236 · Cited by 209
Cited by
Junction Temperature Control for More Reliable Power Electronics
Andresen, M., Ma, K., Buticchi, G., Falck, J., Blaabjerg, F., & Liserre, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2665697 · Cited by 345
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Wallscheid, O., & Bocker, J. (2016) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2015.2473673 · Cited by 242
“Realtime temperature estimation of critical motor components can be used as the input quantities of derating controllers [3].”
BackgroundMethodology for Active Thermal Cycle Reduction of Power Electronic Modules
van der Broeck, C. H., Ruppert, L. A., Lorenz, R. D., & De Doncker, R. W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882184 · Cited by 85
“teresis control [26]–[30], and model predictive control (MPC) [31]–[34] to region-based control algorithms [17], [24], [35].”
BackgroundInfluentialReview of active thermal and lifetime control techniques for power electronic modules
Andresen, M., Liserre, M., & Buticchi, G. (2014) · 2014 16th European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910822 · Cited by 81
Metadata
- Authors
- Lemmens, J., Vanassche, P., & Driesen, J.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2014-06
- Volume
- 2
- Issue
- 2
- Pages
- 249-263
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W1920533799
- Cited by
- 157
- References
- 3
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimal Control of Traction Motor Drives Under Electrothermal Constraints. https://app.cochat.ai/papers/10.1109/jestpe.2014.2299765
- The paper
- Lemmens, J., Vanassche, P., & Driesen, J. (2014). Optimal Control of Traction Motor Drives Under Electrothermal Constraints. IEEE Journal of Emerging and Selected Topics in Power Electronics. https://doi.org/10.1109/jestpe.2014.2299765
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.