The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Multi-Objective Optimization of 50 kW/85 kHz IPT System for Public Transport
Abstract
Inductive power transfer (IPT) is an attractive solution for the automated battery charging of public transport electric vehicles (EVs) with low maintenance requirements. This paper presents the design of a 50 kW/85 kHz contactless EV charger, with a focus on the IPT transmitter and receiver coils. The multi-objective magnetics optimization reveals the Pareto tradeoffs and performance limitations in terms of high efficiency, high power density, and low stray field for high-power IPT systems without moving mechanical parts. A full-scale hardware prototype is realized and experimentally investigated. The dc-dc conversion efficiency, including all the power electronics stages, is measured as 95.8% at 50 kW power transfer across an air gap of 160 mm (coil dimensions 410 × 760 × 60 mm3). With 150 mm coil misalignment in the worst case direction, the dc-dc efficiency drops to 92%. The measurements of the magnetic stray field show compliance with ICNIRP 2010 at 800 mm distance from the IPT coil center.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)
(2010) · Health Physics · doi:10.1097/hp.0b013e3181f06c86 · Cited by 2,164
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Lin, J., Saunders, R. A., Schulmeister, K., Söderberg, P. G., Stuck, B. E., Swerdlow, A. J., Taki, M., Veyret, B., Ziegelberger, G., Repacholi, M. H., et al. (2010) · HAL · Cited by 1,261
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Inductors and Transformers for Power Electronics
Valchev, V. C., & Van den Bossche, A. (2018) · CRC Press eBooks · doi:10.1201/9781420027280 · Cited by 562
Whitaker, B., Barkley, A., Cole, Z., Passmore, B., Martin, D., McNutt, T. R., Lostetter, A. B., Lee, J. S., & Shiozaki, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279950 · Cited by 441
Bosshard, R., Kolar, J. W., Muhlethaler, J., Stevanovic, I., Wunsch, B., & Canales, F. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2311302 · Cited by 411
Self-citationInductive Powering: Basic Theory and Application to Biomedical Systems
Schuylenbergh, K. V., & Puers, R. (2009) · Medical Entomology and Zoology · Cited by 240
Comprehensive Evaluation of Rectangular and Double-D Coil Geometry for 50 kW/85 kHz IPT System
Bosshard, R., Iruretagoyena, U., & Kolar, J. W. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2600162 · Cited by 226
Self-citationInductive power transfer for electric vehicle charging: Technical challenges and tradeoffs
Bosshard, R., & Kolar, J. W. (2016) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2016.2583839 · Cited by 201
Self-citationHigh-Efficiency Transcutaneous Energy Transfer for Implantable Mechanical Heart Support Systems
Knecht, O., Bosshard, R., & Kolar, J. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2396194 · Cited by 186
Self-citationModeling and multi-objective optimization of inductive power components
Mühlethaler, J. (2012) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-007328104 · Cited by 159
All-SiC 9.5 kW/dm3On-Board Power Electronics for 50 kW/85 kHz Automotive IPT System
Bosshard, R., & Kolar, J. W. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2624285 · Cited by 116
Self-citationWeight Optimization of a Cooling System Composed of Fan and Extruded-Fin Heat Sink
Gammeter, C., Krismer, F., & Kolar, J. W. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2336977 · Cited by 87
Self-citationCooling Concepts for High Power Density Magnetic Devices
Biela, J., & Kolar, J. W. (2007) · Power Conversion Conference · doi:10.1109/pccon.2007.372915 · Cited by 74
Self-citationMulti-Objective Optimization of Inductive Power Transfer Systems for EV Charging
Bosshard, R. (2015) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010664107 · Cited by 72
Self-citationPevere, A., Petrella, R., Mi, C. C., & Zhou, S. (2014) · IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2014.7056221 · Cited by 50
A practical investigation of a high power, bidirectional charging system for electric vehicles
Tritschler, J., Reichert, S., & Goeldi, B. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910809 · Cited by 45
Magnor, D., Gerschler, J. B., Ecker, M., Merk, P., & Sauer, D. U. (2009) · EU PVSEC · doi:10.4229/24theupvsec2009-4bo.11.3 · Cited by 41
Cited by
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment
Zhao, L., Thrimawithana, D. J., & Madawala, U. K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686301 · Cited by 328
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
Metadata
- Authors
- Bosshard, R., & Kolar, J. W.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2016-12
- Volume
- 4
- Issue
- 4
- Pages
- 1370-1382
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2515428233
- Cited by
- 317
- References
- 20
- FWCI
- 10.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.