The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Analysis, Design, and Demonstration of a 25-kW Dynamic Wireless Charging System for Roadway Electric Vehicles
Abstract
Dynamic wireless charging of electric vehicles (EVs) can significantly extend the EVs' driving range and consequently, the prospect of electrified transportation. In this paper, a comprehensive study is conducted to elaborate the constraints of real driving conditions and propose a solution that could cope with misalignment problem and the dynamics imposed by the charging process and by EVs passing over road-embedded charging pads. A dual-loop primary controller is proposed to regulate primary-side power and current. The controller allows sequential and timely activation of segmented primary coils; it controls the primary coil current at the reference value under no-load and loaded conditions, compensates for power transfer reduction caused by the vehicle lateral misalignment (LTM), and prevents primary overloading. The primary of the dynamic wireless charger is modeled using the generalized state-space averaging method and the model is verified through simulations and experiments. After that, a controller has been designed and implemented and its operation is evaluated through simulations and experimental tests. A 25-kW charging system with two primary coils is built and tested in a real environment. The measured energy efficiency is 86% for the laterally aligned vehicle, with the possibility to be increased over 90% using enhanced schemes for coils' activation and deactivation. The system is delivering an equal amount of energy for all LTMs in the range of ±15 cm, which improves the expected value of transferred energy by more than 30%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Generalized averaging method for power conversion circuits
Sanders, S. R., Noworolski, J. M., Liu, X. Z., & Verghese, G. C. (1991) · IEEE Transactions on Power Electronics · doi:10.1109/63.76811 · Cited by 1,205
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Compensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Primary-Side Power Flow Control of Wireless Power Transfer for Electric Vehicle Charging
Miller, J. M., Onar, O. C., & Chinthavali, M. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2382569 · Cited by 533
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility
Bi, Z., Kan, T., Mi, C. C., Zhang, Y., Zhao, Z., & Keoleian, G. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.003 · Cited by 485
Zaheer, A., Hao, H., Covic, G. A., & Kacprzak, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329693 · Cited by 371
Performance of batteries for electric vehicles on short and longer term
Gerssen-Gondelach, S. J., & Faaij, A. P. C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.085 · Cited by 359
A Novel Phase-Shift Control of Semibridgeless Active Rectifier for Wireless Power Transfer
Colak, K., Asa, E., Bojarski, M., Czarkowski, D., & Onar, O. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2430832 · Cited by 313
ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer Application
Pantic, Z., Bai, S., & Lukic, S. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2081954 · Cited by 305
Self-citationAnalysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Miller, J. M., Onar, O. C., White, C., Campbell, S., Coomer, C., Seiber, L., Sepe, R., & Steyerl, A. (2014) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2014.2300978 · Cited by 256
Modeling and Control of Series–Series Compensated Inductive Power Transfer System
Zahid, Z. U., Dalala, Z. M., Zheng, C., Chen, R., Faraci, W. E., Lai, J.-S. J., Lisi, G., & Anderson, D. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2327959 · Cited by 238
An Efficiency Optimization Scheme for Bidirectional Inductive Power Transfer Systems
Nguyen, B. X., Vilathgamuwa, D. M., Foo, G. H. B., Wang, P., Ong, A., Madawala, U. K., & Nguyen, T. D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2379676 · Cited by 231
Hao, H., Covic, G. A., & Boys, J. T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293138 · Cited by 209
New Cross-Segmented Power Supply Rails for Roadway-Powered Electric Vehicles
Choi, S., Huh, J., Lee, W. Y., Lee, S. W., & Rim, C. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2247634 · Cited by 196
A Direct AC–AC Converter for Inductive Power-Transfer Systems
Li, H. L., Hu, A. P., & Covic, G. A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159397 · Cited by 188
Ultraslim S-Type Power Supply Rails for Roadway-Powered Electric Vehicles
Choi, S. Y., Jeong, S. Y., Gu, B. W., Lim, G. C., & Rim, C. T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2444894 · Cited by 175
Double-Coupled Systems for IPT Roadway Applications
Chen, L., Nagendra, G. R., Boys, J. T., & Covic, G. A. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2325943 · Cited by 163
Single-Stage Three-Phase AC–AC Matrix Converter for Inductive Power Transfer Systems
Moghaddami, M., Anzalchi, A., & Sarwat, A. I. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2563408 · Cited by 85
Hasan, N., Wang, H., Saha, T., & Pantic, Z. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7309742 · Cited by 44
Self-citationDesign of a dual-loop controller for in-motion wireless charging of an electric bus
Tavakoli, R., Jovičić, A., Niranjan, C., Ryan, B., & Pantic, Z. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855021 · Cited by 23
Self-citation
Cited by
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
“Utah State University in USA worked on a 25 kW DWC system that allows 150mm of horizontal misalignment tolerance while performing at full capacity [43].”
MethodAdvances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Self-citationReview of Wireless Charging Systems for Autonomous Underwater Vehicles
Teeneti, C. R., Truscott, T. T., Beal, D. N., & Pantic, Z. (2021) · IEEE Journal of Oceanic Engineering · doi:10.1109/joe.2019.2953015 · Cited by 302
Self-citationAzad, A. N., Echols, A., Kulyukin, V. A., Zane, R., & Pantic, Z. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2870339 · Cited by 125
Self-citation
Metadata
- Authors
- Tavakoli, R., & Pantic, Z.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2018-09
- Volume
- 6
- Issue
- 3
- Pages
- 1378-1393
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2762476402
- Cited by
- 304
- References
- 27
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.