The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Abstract
An LCL-T resonant converter (LCL-T RC) is shown to behave as a current source when operated at resonant frequency. A detailed analysis of the LCL-T RC for this property is presented. Closed-form expressions for converter gain, component stresses, and the condition for converter design optimized for minimum size of resonant network is derived. A design procedure is illustrated with a prototype 200-W 20-A current-source power supply and experimental results are presented. The LCL-T RC as a current source offers many advantages such as easy parallel operation and low circulating currents at light load. Additionally, with appropriate phase shift in paralleled modules, the peak-peak ripple in output current is reduced and the ripple frequency is increased, reducing filtering requirements. The leakage inductance of a transformer can be advantageously integrated into the resonant network. These merits make the topology applicable in various applications such as magnet power supply, capacitor charging power supply, laser diode drivers, etc.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A comparison of half-bridge resonant converter topologies
Steigerwald, R. L. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.4347 · Cited by 1,972
High-Frequency Resonant Transistor DC-DC Converters
Steigerwald, R. L. (1984) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1984.350066 · Cited by 330
Resonant converter topologies with three and four energy storage elements
Batarseh, I. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285495 · Cited by 217
A complete DC analysis of the series resonant converter
Vorperian, V., & Cuk, S. (1982) · 1982 IEEE Power Electronics Specialists conference · doi:10.1109/pesc.1982.7072398 · Cited by 213
Integrated magnetic for LLC resonant converter
Yang, B., Chen, R., & Lee, F. C. (2003) · APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335) · doi:10.1109/apec.2002.989269 · Cited by 179
Analysis and design of LCL-type series resonant converter
Bhat, A. K. S. (1994) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.281617 · Cited by 164
Application of integrated magnetics in resonant converters
Kats, A., Ivensky, G., & Ben‐Yaakov, S. (2002) · IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.1997.575756 · Cited by 54
Novel half-bridge resonant converter topology realized by adjusting transformer parameters
Chakraborty, C., Ishida, M., & Hori, Y. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.982263 · Cited by 25
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Covic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.904025 · Cited by 439
Metadata
- Authors
- Borage, M., Tiwari, S., & Kotaiah, S.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2005-12
- Volume
- 52
- Issue
- 6
- Pages
- 1547-1554
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2104396826
- Cited by
- 271
- References
- 8
- FWCI
- 2.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply. https://app.cochat.ai/papers/10.1109/tie.2005.858729
- The paper
- Borage, M., Tiwari, S., & Kotaiah, S. (2005). Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2005.858729
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.