A Two-Stage Three-Phase Integrated Charger for Electric Vehicles With Dual Cascaded Control Strategy
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
A new three-phase integrated onboard charger and derivative control strategy are proposed and implemented in this paper. The integrated charger is composed of a three-phase interface and the traction propulsion system of the vehicle. The three-phase interface is derived based on the traditional three-phase three-switch buck ac-dc converter and is integrated with the propulsion system to construct an integrated buck-boost charger, in which the inverter is reconfigured to operate as an interleaved converter. The motor windings are used as the inductors of the integrated buck-boost charger. A dual cascaded control strategy is designed for the two-stage charger. The first cascaded control regulates the battery voltage and the motor-winding currents, while the second cascaded control modulates the input filter inductor current and the input filter capacitor voltage. The integrated charger is modeled and analyzed to design the controllers, considering the sensitivities of duty cycle to the input filter inductor current and to the input filter capacitor voltage, and the sensitivity of the modulation index to the motor-winding currents. A 1.5-kW prototype is designed and developed to verify the feasibility of the proposed integrated charger and the control strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Self-citationHe, P., & Khaligh, A. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2016.2630927 · Cited by 501
Self-citationShi, C., Tang, Y., & Khaligh, A. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2729345 · Cited by 187 · cited 2×
“Thus, the electromagnetic force is aligned with the a-axis, and the rotor is stationary with the electric angle as π /2 during battery charging mode [4].”
BackgroundSelf-citationAn integrated fast battery charger for Electric Vehicle
Lacroix, S., Laboure, E., & Hilairet, M. (2010) · 2010 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2010.5729063 · Cited by 150 · cited 1×
“In [8] and [9], the propulsion systems need to be modified to adopt specially designed propulsion motors with split windings.”
BackgroundDesign of 1 kW bidirectional half-bridge CLLC converter for electric vehicle charging systems
He, P., & Khaligh, A. (2016) · 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) · doi:10.1109/pedes.2016.7914445 · Cited by 46 · cited 1×
“Based on the principle of energy conservation and power equality [35], [36], the equivalent filter inductance and equivalent filter capacitance are quantified in in the following equations: Ceq = 2 3 C f (7)”
BackgroundSelf-citation
Cited by
Global Trends in High-Power On-Board Chargers for Electric Vehicles
Khaligh, A., & D'Antonio, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897050 · Cited by 652
“Control for the three-phase input mode of operation can be found in [99].”
BackgroundSelf-citationMetwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
“Moreover, it may be considered as a cost-effective solution due to the omission of a second conversion stage [68].”
BackgroundImproved Operation and Control of Single-Phase Integrated On-Board Charger System
Gao, J., Sun, W., Jiang, D., Zhang, Y., & Qu, R. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3025664 · Cited by 36
Metadata
- Authors
- Shi, C., & Khaligh, A.
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2018-06
- Volume
- 6
- Issue
- 2
- Pages
- 898-909
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2791321710
- Cited by
- 62
- References
- 5
- FWCI
- 2.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.