A Single-Phase Integrated Onboard Battery Charger Using Propulsion System for Plug-in Electric Vehicles
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
Plug-in electric vehicles (PEVs) are equipped with onboard level-1 or level-2 chargers for home overnight or office daytime charging. In addition, off-board chargers can provide fast charging for traveling long distances. However, off-board high-power chargers are bulky, expensive, and require comprehensive evolution of charging infrastructures. An integrated onboard charger capable of fast charging of PEVs will combine the benefits of both the conventional onboard and off-board chargers, without additional weight, volume, and cost. In this paper, an innovative single-phase integrated charger, using the PEV propulsion machine and its traction converter, is introduced. The charger topology is capable of power factor correction and battery voltage/current regulation without any bulky add-on components. Ac machine windings are utilized as mutually coupled inductors, to construct a two-channel interleaved boost converter. The circuit analyses of the proposed technology, based on a permanent magnet synchronous machine (PMSM), are discussed in details. Experimental results of a 3-kW proof-of-concept prototype are carried out using a 220-Vrm s, 3-phase, 8-pole PMSM. A nearly unity power factor and 3.96% total harmonic distortion of input ac current are acquired with a maximum efficiency of 93.1%.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496 · cited 2×
“PMSMs are suitable candidates as PEV propulsion machines owing to their superiorities in terms of high power density, high efficiency and light weight/volume [11].”
BackgroundElectric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling
Chan, C. C., Bouscayrol, A., & Chen, K. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2033605 · Cited by 792 · cited 1×
“CONVENTIONAL level-1 and level-2 onboard chargers are utilized to charge plug-in electric vehicle (PEV) batteries using single-phase power outlets [1], [2].”
BackgroundElectrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669 · cited 2×
“In a typical three-phase-ac machine propulsion system, a bidirectional three-phase traction converter enables battery power flow to the ac machine during propulsion and battery charging during regenerative braking [10].”
BackgroundMethodKhaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630 · cited 2×
“However, due to their charging power limitations, it might take between 4 to 20 hours to fully charge a PEV battery [3], [4].”
BackgroundSelf-citationAdvanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476 · cited 2×
“To reduce the size, weight and cost of onboard chargers, integrated chargers are proposed and studied in the literature [14]–[20].”
BackgroundSelf-citationEvaluation and Efficiency Comparison of Front End AC-DC Plug-in Hybrid Charger Topologies
Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2166413 · Cited by 296
An Automotive Onboard 3.3-kW Battery Charger for PHEV Application
Gautam, D. S., Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2210259 · Cited by 274 · cited 1×
“CONVENTIONAL level-1 and level-2 onboard chargers are utilized to charge plug-in electric vehicle (PEV) batteries using single-phase power outlets [1], [2].”
BackgroundAn Integral Battery Charger With Power Factor Correction for Electric Scooter
Pellegrino, G., Armando, E., & Guglielmi, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2033187 · Cited by 267
Bi-directional charging topologies for plug-in hybrid electric vehicles
Erb, D. C., Onar, O. C., & Khaligh, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433520 · Cited by 193
Self-citationReview of charging power levels and infrastructure for plug-in electric and hybrid vehicles
Yilmaz, M., & Krein, P. T. (2012) · 2012 IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183208 · Cited by 193 · cited 1×
“In many electric vehicles (such as Prius Hybrid, Camry hybrid, Fusion hybrid and Nissan Leaf EV), there is a bidirectional dc-dc converter between the threephase traction converter and the battery to step up the battery voltage when the battery voltage is lower than its rated voltage due to low SoC (state of charge) […”
Background
Research works printed but not linked: 2
- ohm, 2000, Dynamic model of PM Synchronous Motors
- 10.1109/TIA.2016.2553650 · DOI · Paper page
Cited by
Global Trends in High-Power On-Board Chargers for Electric Vehicles
Khaligh, A., & D'Antonio, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897050 · Cited by 652
“be found in [100]–[101].”
Self-citationA Review of Bidirectional On-Board Chargers for Electric Vehicles
Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3069448 · Cited by 390
“Torque production can be eliminated by restricting it to high frequency components with a zero average [146], phase transposition in the charging mode [148] or through flux cancellation with split winding machines [154].”
BackgroundElectric Vehicles Charging Technology Review and Optimal Size Estimation
Brenna, M., Foiadelli, F., Leone, C., & Longo, M. (2020) · Journal of Electrical Engineering & Technology · doi:10.1007/s42835-020-00547-x · Cited by 298
A Comprehensive Review on Solar Powered Electric Vehicle Charging System
Khan, S., Ahmad, A., Ahmad, F., Shafaati Shemami, M., Saad Alam, M., & Khateeb, S. (2018) · Smart Science · doi:10.1080/23080477.2017.1419054 · Cited by 284
Sun, X., Shi, Z., Lei, G., Guo, Y., & Zhu, J. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2939794 · Cited by 231
Metadata
- Authors
- Shi, C., Tang, Y., & Khaligh, A.
- Affiliations
- University of Maryland, College Park (US)
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2017-12
- Volume
- 66
- Issue
- 12
- Pages
- 10899-10910
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2738428153
- Cited by
- 187
- References
- 30
- Citations by year
- 2026: 8 · 2025: 27 · 2024: 22 · 2023: 30 · 2022: 23 · 2021: 26 · 2020: 18 · 2019: 21 · 2018: 11 · 2017: 1
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Vehicular Technology (publishedVersion)
- Funders
- National Science Foundation (1507546)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- plug-in electric vehicles, fast charging, propulsion system integration, traction converter, interleaved boost converter, power factor correction, battery voltage regulation, permanent magnet synchronous motor, mutual inductance, total harmonic distortion, charging efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Single-Phase Integrated Onboard Battery Charger Using Propulsion System for Plug-in Electric Vehicles. https://app.cochat.ai/papers/10.1109/tvt.2017.2729345
- The paper
- Shi, C., Tang, Y., & Khaligh, A. (2017). A Single-Phase Integrated Onboard Battery Charger Using Propulsion System for Plug-in Electric Vehicles. IEEE Transactions on Vehicular Technology. https://doi.org/10.1109/tvt.2017.2729345
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.