The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Modeling and Characterization of Piezoelectric $d_{33}$ -Mode MEMS Energy Harvester
Abstract
This paper presents the modeling, fabrication, and characterization of a piezoelectric microelectromechanical systems (MEMS) energy harvester using a d33piezoelectric mode. A theoretical analysis and an analytical modeling for the d33-mode device were first performed to estimate the output power as a function of the material parameters and device geometry. A PbTiO3seed layer was newly applied as an interlayer between the ZrO2and Pb(Zr0.52Ti0.48)O3(PZT) thin films to improve the piezoelectric property of the sol-gel spin-coated PZT thin film. The fabricated cantilever PZT film with an interdigital shaped electrode exhibited a remnant polarization of 18.5 C/cm2, a coercive field of less than 60 kV/cm, a relative dielectric constant of 1125.1, and a d33piezoelectric constant of 50 pC/N. The fabricated energy-harvesting device generated an electrical power of 1.1 W for a load of 2.2 M with 4.4 Vpeak-to-peakfrom a vibration with an acceleration of 0.39 g at its resonant frequency of 528 Hz. The corresponding power density was 7.3 mW cm-3· g-2. The experimental results were compared with those numerically calculated using the equations derived from the dynamic and analytical modeling. The fabricated device was also compared with other piezoelectric MEMS energy-harvesting devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876
Cited by
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
A Review on Piezoelectric Energy Harvesting: Materials, Methods, and Circuits
Priya, S., Song, H.-C., Zhou, Y., Varghese, R., Chopra, A., Kim, S.-G., Kanno, I., Wu, L., Ha, D. S., Ryu, J., et al. (2019) · Energy Harvesting and Systems · doi:10.1515/ehs-2016-0028 · Cited by 433
Liu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C. (2011) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2162488 · Cited by 361
Piezoelectric MEMS for energy harvesting
Kim, S.-G., Priya, S., & Kanno, I. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.275 · Cited by 320
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Metadata
- Authors
- Park, J. C., Park, J. Y., & Lee, Y.-P.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2010-10
- Volume
- 19
- Issue
- 5
- Pages
- 1215-1222
- ISSN
- 1057-7157 (ISSN-L)
- 1941-0158
- OpenAlex
- W2138145891
- Cited by
- 164
- References
- 2
- FWCI
- 24.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modeling and Characterization of Piezoelectric $d_{33}$ -Mode MEMS Energy Harvester. https://app.cochat.ai/papers/10.1109/jmems.2010.2067431
- The paper
- Park, J. C., Park, J. Y., & Lee, Y.-P. (2010). Modeling and Characterization of Piezoelectric $d_{33}$ -Mode MEMS Energy Harvester. Journal of Microelectromechanical Systems. https://doi.org/10.1109/jmems.2010.2067431
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.