Laser Radar Receiver Channel With Timing Detector Based on Front End Unipolar-to-Bipolar Pulse Shaping
The DOI matches its Crossref record.
Abstract
An integrated receiver channel for a pulsed time-of-flight laser range finder is presented based on a timing discrimination principle in which the incoming unipolar detector current pulse is converted to a bipolar pulse at the front end of the receiver channel. Thus no optical or electrical gain control is needed within the dynamic range of the receiver, which according to measurements is 1:3000 with a timing walk error of plusmn 55 ps (plusmn 8 mm in distance). The minimum detectable input signal current is about 1.3muA at an SNR of 10 with a bandwidth of 200 MHz. The circuit is realized in a 0.35mum SiGe BiCMOS process and consumes 220 mW of power.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wideband Receiver for a Three-Dimensional Ranging LADAR System
Ngo, T.-H., Kim, C.-H., Kwon, Y. J., Ko, J. S., Kim, D.-B., & Park, H.-H. (2013) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2012.2215800 · Cited by 68
“where , , and are the standard deviations of the timing jitter, noise, distance, respectively; is the input signal; is the speed of light; is the rise time of the input pulse, and SNR is the peak-signal-voltage-to-rms-noise ratio [8], [11].”
BackgroundMethodA Linear-Mode LiDAR Sensor Using a Multi-Channel CMOS Transimpedance Amplifier Array
Hong, C., Kim, S.-H., Kim, J.-H., & Park, S. M. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2852794 · Cited by 64
A 60-m range 6.16-mW laser-power linear-mode LiDAR system with multiplex ADC/TDC in 65-nm CMOS
Liu, M., Liu, H., Li, X., & Zhu, Z. (2020) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2019.2955671 · Cited by 54
“According to the LiDAR equation [15], the resulting signal current with targets of the Fig.”
BackgroundA Linear Dynamic Range Receiver with Timing Discrimination for Pulsed TOF Imaging LADAR Application
Zheng, H., Ma, R., Liu, M., & Zhu, Z. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2826860 · Cited by 46
“The output optical current of the photoelectric detector with targets of the Lambertian type can simply be derived through the well-known radar equation and responsibility of APD [10]”
A CMOS AFE With 37-nA rms Input-Referred Noise and Marked 96-dB Timing DR for Pulsed LiDAR
Li, K., Guo, J., & Zhao, Y. (2022) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2022.3181133 · Cited by 14
“Pulse-shaping based timing discrimination technique can reduce the walk error by converting the incoming unipolar pulses into bipolar ones and detecting the zero-crossing point of the bipolar signal [26]–[28].”
Background
Metadata
- Authors
- Kurtti, S., & Kostamovaara, J.
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2009-03
- Volume
- 44
- Issue
- 3
- Pages
- 835-847
- ISSN
- 0018-9200 (ISSN-L)
- OpenAlex
- W2152342294
- Cited by
- 38
- References
- 0
- FWCI
- 1.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser Radar Receiver Channel With Timing Detector Based on Front End Unipolar-to-Bipolar Pulse Shaping. https://app.cochat.ai/papers/10.1109/jssc.2008.2012364
- The paper
- Kurtti, S., & Kostamovaara, J. (2009). Laser Radar Receiver Channel With Timing Detector Based on Front End Unipolar-to-Bipolar Pulse Shaping. IEEE Journal of Solid-State Circuits. https://doi.org/10.1109/jssc.2008.2012364
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.