The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
6TiSCH: deterministic IP-enabled industrial internet (of things)
Abstract
Industrial and IP-enabled low-power wireless networking technologies are converging, resulting in the Industrial Internet of Things. On the one hand, low-power wireless solutions are available today that answer the strict reliability and power consumption requirements of industrial applications. These solutions are based on Time- Synchronized Channel Hopping, a medium access control technique at the heart of industrial standards such as the WirelessHART and ISA100.11a, and layer 1 and 2 standards such as IEEE802.15.4e. On the other hand, a range of standards have been published to allow low-power wireless devices to communicate using the Internet Protocol (IP), thereby becoming true “fingers of the Internet,” and greatly simplifying their integration into existing networks. This article acknowledges the standardization effort to combine those capabilities. The networks resulting from this convergence exhibit reliability and power consumption performances compatible with demanding industrial applications, while being easy to integrate, and following the end-to-end paradigm of today's Internet. In particular, this article presents the work being done in 6TiSCH, a newly-formed working group in the Internet Engineering Task Force, which is standardizing the mechanisms making the Industrial Internet of Things a reality.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks
Brandt, A., Hui, J., Kelsey, R., Levis, P., Pister, K., Struik, R., Vasseur, J., & Alexander, R. (2012) · doi:10.17487/rfc6550 · Cited by 2,662
The Constrained Application Protocol (CoAP)
Shelby, Z., Hartke, K., & Bormann, C. (2014) · doi:10.17487/rfc7252 · Cited by 2,605
Neighbor Discovery Optimization for IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs)
Chakrabarti, S., Nordmark, E., & Bormann, C. (2012) · doi:10.17487/rfc6775 · Cited by 198
Technical Overview of SmartMesh IP
Watteyne, T., Doherty, L., Simon, J., et al. (2013) · International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing (IMIS) · doi:10.1109/imis.2013.97 · Cited by 57
Self-citation
Cited by
Security of the Internet of Things: Vulnerabilities, Attacks, and Countermeasures
Butun, I., Osterberg, P., & Song, H. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2019.2953364 · Cited by 707
Tange, K., De Donno, M., Fafoutis, X., & Dragoni, N. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.3011208 · Cited by 410
“6TiSCH [228] is a standardization effort by the Internet Engineering Task Force (IETF), aimed at low-power determin-”
MethodRafique, W., Qi, L., Yaqoob, I., Imran, M., Rasool, R. U., & Dou, W. (2020) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2020.2997475 · Cited by 358
Ghaleb, B., Al-Dubai, A. Y., Ekonomou, E., Alsarhan, A., Nasser, Y., Mackenzie, L. M., & Boukerche, A. (2019) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2018.2874356 · Cited by 333
Analysis of Three IoT-Based Wireless Sensors for Environmental Monitoring
Mois, G., Folea, S., & Sanislav, T. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2677619 · Cited by 321
Comparative Examination on Architecture and Protocol of Industrial Wireless Sensor Network Standards
Wang, Q., & Jiang, J. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2016.2548360 · Cited by 182
The Tactile Internet for Industries: A Review
Aijaz, A., & Sooriyabandara, M. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2018.2878265 · Cited by 169
Szymanski, T. H. (2022) · IEEE Access · doi:10.1109/access.2022.3169137 · Cited by 59
Metadata
- Authors
- Dujovne, D., Watteyne, T., Vilajosana, X., & Thubert, P.
- Venue
- IEEE Communications Magazine
- Published
- 2014-12
- Volume
- 52
- Issue
- 12
- Pages
- 36-41
- ISSN
- 0163-6804 (ISSN-L)
- OpenAlex
- W2146275810
- Cited by
- 267
- References
- 5
- FWCI
- 26.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.