The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
New Approaches to Reliability Assessment: Using physics-of-failure for prediction and design in power electronics systems
Abstract
Power electronics are facing continuous pressure to be cheaper and smaller, have a higher power density, and, in some cases, also operate at higher temperatures. At the same time, power electronics products are expected to have reduced failures because it is essential for reducing the cost of energy. New approaches for reliability assessment are being taken in the design phase of power electronics systems based on the physics-of-failure in components. In this approach, many new methods, such as multidisciplinary simulation tools, strength testing of components, translation of mission profiles, and statistical analysis, are involved to enable better prediction and design of reliability for products. This article gives an overview of the new design flow in the reliability engineering of power electronics from the system-level point of view and discusses some of the emerging needs for the technology in this field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
Self-citationMa, K., Liserre, M., Blaabjerg, F., & Kerekes, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2312335 · Cited by 460
Self-citationEvaluation and Design Tools for the Reliability of Wind Power Converter System
Ma, K., Zhou, D., & Blaabjerg, F. (2015) · Journal of Power Electronics · doi:10.6113/jpe.2015.15.5.1149 · Cited by 34
Self-citation
Cited by
Distributed Power-Generation Systems and Protection
Blaabjerg, F., Yang, Y., Yang, D., & Wang, X. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2017.2696878 · Cited by 671
Self-citationReview on reliability of supercapacitors in energy storage applications
Liu, S., Wei, L., & Wang, H. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115436 · Cited by 324
Self-citationReliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
“On the other hand, for hardware wear-out failures, a more realistic reliability assessment procedure can be carried out based on the Design for Reliability (DfR) [7] and Physics-of-Failure (PoF) [8], complementing conventional reliability methods.”
MethodSelf-citationMethodology for Active Thermal Cycle Reduction of Power Electronic Modules
van der Broeck, C. H., Ruppert, L. A., Lorenz, R. D., & De Doncker, R. W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882184 · Cited by 85
Wu, X., Yang, X., Ye, J., & Liu, G. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3498350 · Cited by 32
Metadata
- Authors
- Ma, K., Wang, H., & Blaabjerg, F.
- Venue
- IEEE Power Electronics Magazine
- Published
- 2016-12
- Volume
- 3
- Issue
- 4
- Pages
- 28-41
- ISSN
- 2329-9207 (ISSN-L)
- 2329-9215
- OpenAlex
- W2562061939
- Cited by
- 168
- References
- 4
- FWCI
- 26.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.