The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lithium ion battery chemistries from renewable energy storage to automotive and back-up power applications — An overview
Abstract
Lithium ion (Li-ion) batteries have been extensively used in consumer electronics because of their characteristics, such as high efficiency, long life, and high gravimetric and volumetric energy. In addition, Li-ion batteries are becoming the most attractive candidate as electrochemical storage systems for stationary applications, as well as power source for sustainable automotive and back-up power supply applications. This paper gives an overview of the Li-ion battery chemistries that are available at present in the market, and describes the three out of four main applications (except the consumers' applications), grid support, automotive, and back-up power, for which the Li-ion batteries are suitable. Each of these applications has its own specifications and thus, the chemistry of the Li-ion battery should be chosen to fulfill the requirements of the corresponding application. Consequently, this paper discusses as well, the suitability of the presented Li-ion battery chemistries for different applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Progress in electrical energy storage system: a critical review
Chen, H., Cong, T. N., Yang, W., Tan, C., Li, Y., & Ding, Y. (2009) · Progress in Natural Science · doi:10.1016/j.pnsc.2008.07.014 · Cited by 3,746
Cited by
Hesse, H., Schimpe, M., Kucevic, D., & Jossen, A. (2017) · Energies · doi:10.3390/en10122107 · Cited by 770
An Overview and Comparison of Online Implementable SOC Estimation Methods for Lithium-Ion Battery
Meng, J., Ricco, M., Luo, G., Swierczynski, M., Stroe, D.-I., Stroe, A.-I., & Teodorescu, R. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2775179 · Cited by 393
Self-citationStroe, D.-I., Knap, V., Swierczynski, M., Stroe, A.-I., & Teodorescu, R. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2616319 · Cited by 351
Self-citationAn interdisciplinary review of energy storage for communities: Challenges and perspectives
Parra, D., Swierczynski, M., Stroe, D. I., Norman, S. A., Abdon, A., Worlitschek, J., O’Doherty, T., Rodrigues, L., Gillott, M., Zhang, X., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.003 · Cited by 307
Self-citationStecca, M., Ramirez Elizondo, L., Batista Soeiro, T., Bauer, P., & Palensky, P. (2020) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2020.2981832 · Cited by 297
Can Li-Ion batteries be the panacea for automotive applications?
Opitz, A., Badami, P., Shen, L., Vignarooban, K., & Kannan, A. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.019 · Cited by 284
Stroe, D.-I., Swierczynski, M., Stan, A.-I., Teodorescu, R., & Andreasen, S. J. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2321028 · Cited by 176
Self-citationThe Influence of Temperature on the Capacity of Lithium Ion Batteries with Different Anodes
Lv, S., Wang, X., Lu, W., Zhang, J., & Ni, H. (2021) · Energies · doi:10.3390/en15010060 · Cited by 99
“[21] thought that lithium-ion batteries are becoming the most attractive candidate for electrochemical storage systems for stationary applications, as well as power sources for sustainable automotive and backup power applications.”
BackgroundSegundo Sevilla, F. R., Parra, D., Wyrsch, N., Patel, M. K., Kienzle, F., & Korba, P. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.02.001 · Cited by 95
Jo, S., Jung, S., & Roh, T. (2021) · Energies · doi:10.3390/en14217206 · Cited by 76
Design of a systematic value chain for lithium-ion batteries from the raw material perspective
Weimer, L., Braun, T., & Hemdt, A. V. (2019) · Resources Policy · doi:10.1016/j.resourpol.2019.101473 · Cited by 44
Numerical and experimental investigation of state of health of Li-ion battery
Sarmah, S. B., Kalita, P., Das, B., Garg, A., Gao, L., Pai, R. K., & Sarma, M. (2020) · International Journal of Green Energy · doi:10.1080/15435075.2020.1763360 · Cited by 11
A data driven model for accurate SOC estimation in EVs
Luo, G., Meng, J., Ji, X., Cai, X., & Gao, F. (2017) · 2017 IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2017.7913256 · Cited by 7
Metadata
- Authors
- Stan, A.-I., Swierczynski, M., Stroe, D.-I., Teodorescu, R., & Andreasen, S. J.
- Venue
- 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM)
- Publisher
- IEEE
- Published
- 2014-05
- Pages
- 713-720
- OpenAlex
- W2116009444
- Cited by
- 165
- References
- 2
- FWCI
- 17.88
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.