Medium frequency transformers for solid-state-transformer applications — Design and experimental verification
The DOI matches its Crossref record; 13 of the 14 references it cites were found in a registry or an index.
Abstract
Solid-state-transformer technology pushes the specifications of electric transformers in the high-power medium-frequency range. This combination results in larger-sized transformers operating at higher frequencies whereby parasitic phenomenon should be carefully accounted for. This paper presents an analytical description of the limiting factors and the connection between frequency/power rating and the available core and copper conductor technology on the power density and efficiency of medium-frequency transformers. Furthermore, two designed transformers for 166kW/20kHz based on two different core materials and cooling systems are presented. Extensive copper, core and cooling system loss measurements on one of these transformers are discussed in order to analyze the transformers' behavior from a practical point of view.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Ferrite and nanocrystalline-based MF transformers differ in cooling system design, and ultimately in power density.”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [9]
In the citing paper
“These designs have power rating exceeding 50 kW, and the operating frequency is in the range of 1.75 kHz and 22 kHz [8-14].”
From Design and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters (2021) · cites this paper as [9]
Citations
Cites
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Wang, J., Huang, A., Sung, W., Liu, Y., & Baliga, B. (2009) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2009.932583 · Cited by 260 · cited 1×
“In particular, the Solid-State-Transformer (SST) concept combines the desired features of flexible power routing [3] (smart-grids) due to the mains and load side active power circuits and the reduction in size/weight due to the operation P o w er [ V A ]”
BackgroundOrtiz, G., Biela, J., Bortis, D., & Kolar, J. W. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5542018 · Cited by 229
Self-citationInoue, S., & Akagi, H. (2006) · 2006 37th IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2006.1711782 · Cited by 137
Ortiz, G., Uemura, H., Bortis, D., Kolar, J. W., & Apeldoorn, O. (2013) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2223215 · Cited by 126 · cited 1×
“The utilized modulation scheme ensures soft switching of all semiconductor devices by shaping the current to a triangular waveform [9], as shown in Fig.”
MethodSelf-citationIntegration of Leakage Inductance in Tape Wound Core Transformers for Dual Active Bridge Converters
Cougo, B., & Kolar, J. W. (2012) · Cited by 70
Self-citationLaboratory scale prototype of a power electronic transformer for traction applications
Dujić, D., Mester, A., Chaudhuri, T., Coccia, A., Canales, F., & Steinke, J. K. (2011) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · Cited by 67
Power-electronic grid supply of AC railway systems
Steimel, A. (2012) · International Conference on Optimization of Electrical and Electronic Equipment · doi:10.1109/optim.2012.6231844 · Cited by 52 · cited 1×
“at MF of the isolation transformer (attractive for modern traction solutions) [4–6].”
BackgroundPower Electronic Transformer Technology for Traction Applications – An Overview
Dujic, D., Kieferndorf, F., & Canales, F. (2012) · Electronics ETF · doi:10.7251/els1216050d · Cited by 38
Cougo, B., Tüysüz, A., Mühlethaler, J., & Kolar, J. W. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119508 · Cited by 37 · cited 1×
“The increased losses with respect to calculated values are mainly explained by the un-modeled losses introduced by the cut in tape wound cores [10, 11].”
BackgroundSelf-citationOptimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1997.616632 · Cited by 22 · cited 1×
“The loss density of a litz wire winding results from the approximation for strand diameters smaller than skin depth [7] and assuming a one dimensional magnetic field distribution as it would result from homogenously distributed strands in the core window.”
BackgroundDesign for better thermal management in highpower high-frequency transformers
Pavlovsky, M., de Haan, S. W. H., & Ferreira, J. A. (2005) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2005.1518829 · Cited by 17 · cited 1×
“Power electronics circuits enable the operation of transformers at higher frequencies, thus facilitating the realization of highly-compact and high-efficiency power supplies, as described in the literature for power levels up to 50 kW [1].”
Background
Cited by
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Kumar, D., Zare, F., & Ghosh, A. (2017) · IEEE Access · doi:10.1109/access.2017.2705914 · Cited by 751
“The DC-DC converter can operate at higher frequency range (few 100 Hz to kHz), and thus a considerable reduction in reactive component size can also be achieved [35], [36].”
BackgroundHybrid ac/dc microgrids—Part I: Review and classification of topologies
Unamuno, E., & Barrena, J. A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.194 · Cited by 399
Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application
She, X., Yu, X., Wang, F., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293471 · Cited by 324
High-Frequency Transformer Design for Modular Power Conversion From Medium-Voltage AC to 400 VDC
Zhao, S., Li, Q., Lee, F. C., & Li, B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2774440 · Cited by 231
“The most frequently used topology is the dual active bridge (DAB) converter [8], [9], [11], [15]; except ASEA brown”
Method
Metadata
- Authors
- Ortiz, G., Leibl, M., Kolar, J. W., & Apeldoorn, O.
- Affiliations
- ETH Zurich (CH)
- ABB (Switzerland) (CH)
- Venue
- 2013 IEEE 10th International Conference on Power Electronics and Drive Systems (PEDS)
- Publisher
- IEEE
- Published
- 2013-04
- Pages
- 1285-1290
- OpenAlex
- W2071303620
- Cited by
- 126
- References
- 14
- Citations by year
- 2026: 5 · 2025: 4 · 2024: 6 · 2023: 3 · 2022: 8 · 2021: 12 · 2020: 12 · 2019: 11 · 2018: 6 · 2017: 10 · 2016: 10 · 2015: 18 · 2014: 16 · 2013: 5
- FWCI
- 19.89
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE International Conference on Power Electronics and Drive Systems (PEDS) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Induction Heating and Inverter Technology
- Keywords
- medium frequency transformer, solid-state transformer, power density, transformer efficiency, parasitic losses, core materials, transformer cooling system, high-power transformers, loss measurement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.