The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
A novel folded litz ribbon cable for magnetic components
Abstract
This paper describes the construction of a thin, flat litz ribbon cable suitable for use in magnetic components such as inductors and transformers where one requires reduced AC losses compared to conventional solid conductor ribbon conductors. This conductor has the potential for ease of manufacture and low cost compared to current solutions such as a braided litz cable. Since a 1-D analysis does not accurately model ribbon conductors, a simplified 2-D analysis is developed. Test inductors have been constructed using both a conventional solid copper ribbon cable and the new ribbon litz cable. Measured results are compared to both 1-D and 2-D analyses, and it is shown that the 2-D analysis provides a more accurate result. The experimental results indicate that the new folded litz cable has lower total losses over a relatively wide frequency range compared to the solid conductor ribbon cable of similar cross-sectional area.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Improved analytical modeling of conductive losses in magnetic components
Ferreira, J. A. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285503 · Cited by 629
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Sullivan, C. R. (2001) · IEEE Transactions on Power Electronics · doi:10.1109/63.903999 · Cited by 362
A novel approach for minimizing high-frequency transformer copper losses
Vandelac, J.-P., & Ziogas, P. D. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.17944 · Cited by 244
Urling, A. M., Niemela, V. A., Skutt, G. R., & Wilson, T. G. (2003) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1989.36989 · Cited by 142
Reduction of High-Frequency Conduction Losses Using a Planar Litz Structure
Wang, S., deRooij, M. A., Odendaal, W. G., vanWyk, J. D., & Boroyevich, D. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.843022 · Cited by 107
Self-citationTwo-dimensional calculation of winding losses in transformers
Albach, M. (2002) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2000.880550 · Cited by 79
Optimal air-gap design in high-frequency foil windings
Kutkut, N. H., & Divan, D. M. (1998) · IEEE Transactions on Power Electronics · doi:10.1109/63.712317 · Cited by 71
Research works printed but not linked: 5
- glaser, 2006, Method of Making Electrical Cable
- 0, Scilab
- wang, 2003, Modeling of Skin-and Proximity Effect Losses in Foils and in Planar Litz Windings, Annual Seminar of Center for Power Electronic Systems, 182
- de rooij, 2003, Planar Litz - A Method to Reduce High Frequency Conduction Losses in Integrated Components, CPES Annual Seminar
- glaser, 2004, Method of Making Electrical Cable
Cited by
Hannan, M. A., Ker, P. J., Lipu, M. S. H., Choi, Z. H., Rahman, M. S. A., Muttaqi, K. M., & Blaabjerg, F. (2020) · IEEE Access · doi:10.1109/access.2020.2967345 · Cited by 339
Integrating Magnetics for On-Chip Power: A Perspective
Sullivan, C. R., Harburg, D. V., Qiu, J., Levey, C. G., & Yao, D. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2240465 · Cited by 129
“litz wire with specialized twisting configurations, but requires other strategies in planar conductors [17], [18], [41], [42].”
BackgroundIntegrating magnetics for on-chip power: Challenges and opportunities
Sullivan, C. R. (2009) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2009.5280823 · Cited by 54
“Because (2) has one linear dimension in the numerator and the denominator, we see that the ac resistance is invariant with linear scaling.”
BackgroundLayered foil as an alternative to litz wire: Multiple methods for equal current sharing among layers
Sullivan, C. R. (2014) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2014.6877112 · Cited by 42
“This photograph is a crude prototype intended only to illustrate the concept that was implemented in [12], [13].”
BackgroundMethodMulti-layer folded high-frequency toroidal inductor windings
Nigam, M., & Sullivan, C. R. (2008) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522795 · Cited by 30
“Both the use of vias in PCB technology [9] or folding [10] have been used in the literature.”
Method
Metadata
- Authors
- Glaser, J. S., & de Rooij, M. A.
- Affiliations
- General Electric (United States) (US)
- General Electric Global Research, 1 Research Circle Niskayuna, NY 12309 USA
- Venue
- 2006 37th IEEE Power Electronics Specialists Conference
- Publisher
- IEEE
- Published
- 2006-06
- Pages
- 1-8
- ISSN
- 0275-9306 (ISSN-L)
- OpenAlex
- W1834581926
- Cited by
- 9
- References
- 13
- Citations by year
- 2020: 1 · 2017: 1 · 2014: 1 · 2013: 1
- FWCI
- 1.59
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE Power Electronics Specialists Conference (PESC) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Keywords
- Litz wire, ribbon cable, AC loss, inductors, transformer models, magnetic components, conductor design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A novel folded litz ribbon cable for magnetic components. https://app.cochat.ai/papers/10.1109/pesc.2006.1712225
- The paper
- Glaser, J. S., & de Rooij, M. A. (2006). A novel folded litz ribbon cable for magnetic components. 2006 37th IEEE Power Electronics Specialists Conference. https://doi.org/10.1109/pesc.2006.1712225
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.