CoChat

Continuous 3D scan-matching with a spinning 2D laser

Bosse, Michael, Zlot, Robert · 2009 · 2009 IEEE International Conference on Robotics and Automation

The DOI matches its Crossref record; 14 of the 18 references it cites were found in a registry or an index.

Abstract

Scan-matching is a technique that can be used for building accurate maps and estimating vehicle motion by comparing a sequence of point cloud measurements of the environment taken from a moving sensor. One challenge that arises in mapping applications where the sensor motion is fast relative to the measurement time is that scans become locally distorted and difficult to align. This problem is common when using 3D laser range sensors, which typically require more scanning time than their 2D counterparts. Existing 3D mapping solutions either eliminate sensor motion by taking a “stop-and-scan” approach, or attempt to correct the motion in an open-loop fashion using odometric or inertial sensors. We propose a solution to 3D scan-matching in which a continuous 6DOF sensor trajectory is recovered to correct the point cloud alignments, producing locally accurate maps and allowing for a reliable estimate of the vehicle motion. Our method is applied to data collected from a 3D spinning lidar sensor mounted on a skid-steer loader vehicle to produce quality maps of outdoor scenes and estimates of the vehicle trajectory during the mapping sequences.

Overview

Integrity signals

Registry

Crossref · 10.1109/robot.2009.5152851

Cites

14 of 14 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 14 references

Research works printed but not linked: 2

  1. press, 1992, Numerical Recipes in C, 699
  2. ryde, 2007, Mobile robot 3D perception and mapping with multi-resolution occupancy lists, Proceedings of the IEEE International Conference on Mechatronics and Automation

Cited by

See all 326

Metadata

Authors
Bosse, M., & Zlot, R.
Affiliations
Commonwealth Scientific and Industrial Research Organisation (AU)
Venue
2009 IEEE International Conference on Robotics and Automation
Publisher
IEEE
Published
2009-05
Pages
4312-4319
ISSN
1050-4729 (ISSN-L)
OpenAlex
W2096020743
Cited by
289
References
18
Citations by year
2026: 4 · 2025: 10 · 2024: 9 · 2023: 13 · 2022: 24 · 2021: 23 · 2020: 28 · 2019: 22 · 2018: 34 · 2017: 15 · 2016: 16 · 2015: 20 · 2014: 16 · 2013: 28 · 2012: 10
FWCI
17.62
Type
conference paper
Language
en
Open access
closed
Locations
Proceedings - IEEE International Conference on Robotics and Automation/Proceedings (publishedVersion)
Funders
Commonwealth Scientific and Industrial Research Organisation
Topics
  • Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Robotics and Sensor-Based Localization
  • Physical Sciences › Earth and Planetary Sciences › Geology › 3D Surveying and Cultural Heritage
  • Physical Sciences › Engineering › Aerospace Engineering › Inertial Sensor and Navigation
Keywords
scan matching, 3D point clouds, 3D LiDAR, 6DoF pose estimation, vehicle motion estimation, map building, point cloud alignment, skid steer loaders, outdoor mapping

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Continuous 3D scan-matching with a spinning 2D laser. https://app.cochat.ai/papers/10.1109/robot.2009.5152851
The paper
Bosse, M., & Zlot, R. (2009). Continuous 3D scan-matching with a spinning 2D laser. 2009 IEEE International Conference on Robotics and Automation. https://doi.org/10.1109/robot.2009.5152851

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.