The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Anisotropic etching of silicon
Abstract
Anisotropic etching of silicon has become an important technology in silicon semiconductor processing during the past ten years. It will continue to gain stature and acceptance as standard processing technology in the next few years. Anisotropic etching of (100) orientation silicon is being widely used today and (110) orientation technology is emerging. This paper discusses both orientation-dependent and concentration-dependent etching of (100) and (110) silicon. Very exact process control steps may be designed into a process by use of (100) anisotropic and concentration-dependent etching. Also, methods of oxide or nitride pin hole detection in (100) silicon are presented. Mask alignments to obtain different etch front termination in both (100) and (110) silicon are shown. Very high packing density structures, less than 1 μm, are obtained in the (110) technology, and extremely high etching ratios of greater than 650 to 1 are obtained in (110) orientation-dependent etching. Some of the many applications for anisotropic and concentration-dependent etching are described.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electropolishing Silicon in Hydrofluoric Acid Solutions
Turner, D. R. (1958) · Journal of The Electrochemical Society · doi:10.1149/1.2428873 · Cited by 764
A Water-Amine-Complexing Agent System for Etching Silicon
Finne, R. M., & Klein, D. L. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426793 · Cited by 309
Robbins, H., & Schwartz, B. (1960) · Journal of The Electrochemical Society · doi:10.1149/1.2427617 · Cited by 199
Schwartz, B., & Robbins, H. (1961) · Journal of The Electrochemical Society · doi:10.1149/1.2428090 · Cited by 190
On etching very narrow grooves in silicon
Kendall, D. L. (1975) · Applied Physics Letters · doi:10.1063/1.88113 · Cited by 168
Cited by
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
McDowell, M. T., Lee, S. W., Nix, W. D., & Cui, Y. (2013) · Advanced Materials · doi:10.1002/adma.201301795 · Cited by 1,670
High-efficiency crystalline silicon solar cells: status and perspectives
Battaglia, C., Cuevas, A., & De Wolf, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03380b · Cited by 1,178
Biodegradable polymer microneedles: Fabrication, mechanics and transdermal drug delivery
Park, J.-H., Allen, M. G., & Prausnitz, M. R. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.02.002 · Cited by 1,026
Metadata
- Authors
- Bean, K. E.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 1978-10
- Volume
- 25
- Issue
- 10
- Pages
- 1185-1193
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W1979078109
- Cited by
- 803
- References
- 5
- FWCI
- 14.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.