The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Detection and Differentiation of Replay Attack and Equipment Faults in SCADA Systems
Abstract
Supervisory control and data acquisition (SCADA) systems are widely used for industrial control of critical infrastructures, such as power plants and manufacturing systems. There is abundant evidence of SCADA systems being subject to cyberattacks. With increasing interest in industrial digitization, the cybersecurity of SCADA systems is poised to be even more important. Equipment faults and cyberattacks can manifest themselves in a similar fashion, i.e., they can exhibit similar signatures. This article focuses on methods that are capable of distinguishing equipment faults from bona fide cyberattacks. Especially, we consider a relatively sophisticated form of cyberattack known as the “replay attack” (RA). We derive mathematical formalisms that distinguish the RA from several classes of equipment faults and verify our methodology through an extensive numerical study.Note to Practitioners—This article is motivated by the problem of detecting replay cyberattacks in industrial control systems and differentiating it from equipment faults. Existing approaches mainly focus on the detection aspect but usually ignore the importance of differentiation. We an ensembled statistical process monitoring approach based on five statistical metrics. The statistical metrics are derived based on a theoretical analysis that shows the data characteristics under each system anomaly, including replay attack (RA), controller fault, and plant fault. We mathematically prove that the signatures generated by the derived metrics can be used to differentiate an RA from the equipment faults. We conduct a sensitivity analysis of the detection delay of our method regarding the magnitude of the cyberattack. Physical experiments on a rotating machinery setup show that the proposed approach applies to some simple real-world settings. In future research, we will address the scalability issue of our method as well as more generalized nonlinear system settings.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A New Approach to Linear Filtering and Prediction Problems
Kalman, R. E. (1960) · Journal of Basic Engineering · doi:10.1115/1.3662552 · Cited by 31,751
introduction to random signals and applied kalman filtering
Brown, R. G., & Hwang, P. Y. (1992) · Virtual Defense Library (Ministerio de Defensa) · Cited by 3,365
False data injection attacks against state estimation in electric power grids
Liu, Y., Ning, P., & Reiter, M. K. (2011) · ACM Transactions on Information and System Security · doi:10.1145/1952982.1952995 · Cited by 2,428
AN APPROACH TO TIME SERIES SMOOTHING AND FORECASTING USING THE EM ALGORITHM
Shumway, R. H., & Stoffer, D. S. (1982) · Journal of Time Series Analysis · doi:10.1111/j.1467-9892.1982.tb00349.x · Cited by 1,470
Lancaster, P., & Rodman, L. (1995) · doi:10.1093/oso/9780198537953.001.0001 · Cited by 1,215
Secure control against replay attacks
Mo, Y., & Sinopoli, B. (2009) · 2009 47th Annual Allerton Conference on Communication, Control, and Computing (Allerton) · doi:10.1109/allerton.2009.5394956 · Cited by 899
Attacks against process control systems: risk assessment, detection, and response
Cárdenas, A. A., Amin, S., Lin, Z.-S., Huang, Y.-L., Huang, C.-Y., & Sastry, S. (2011) · Proceedings of the 6th ACM Symposium on Information, Computer and Communications Security · doi:10.1145/1966913.1966959 · Cited by 699
The role and use of the stochastic linear-quadratic-Gaussian problem in control system design
Athans, M. (1971) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1971.1099818 · Cited by 689
An innovations approach to fault detection and diagnosis in dynamic systems
Mehra, R. K., & Peschon, J. (1971) · Automatica · doi:10.1016/0005-1098(71)90028-8 · Cited by 643
Detecting Integrity Attacks on SCADA Systems
Mo, Y., Chabukswar, R., & Sinopoli, B. (2014) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2280899 · Cited by 630
Research works printed but not linked: 3
- Tsang, 2010, Cyberthreats, Vulnerabilities and Attacks on Scada Networks
- 2016, Analysis of the cyber attack on the Ukrainian power grid
- Anderson, 1979, Optimal Filtering, 21, 22
Cited by
Huang, B., Li, Y., Zhan, F., Sun, Q., & Zhang, H. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2021.3077509 · Cited by 193
“Furthermore, Li et al. [28] proposed a statistical process monitoring approach based on five statistical metrics to realize the detection and differentiation of replay attacks and equipment faults in SCADA systems.”
BackgroundMethodZhang, Z., Song, X., Sun, X., & Stojanovic, V. (2023) · International Journal of Adaptive Control and Signal Processing · doi:10.1002/acs.3529 · Cited by 145
“E[V2(t)] ≤ 1 λ2 en2 e{E[V1(0)] +W1(bn)}, (40)”
Digital Twin-Based Cyber-Attack Detection Framework for Cyber-Physical Manufacturing Systems
Balta, E. C., Pease, M., Moyne, J., Barton, K., & Tilbury, D. M. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2023.3243147 · Cited by 125
“The DTs therefore provide valuable abstractions for performing attack detection in CPMS via a composition of methods, illustrating how the proposed framework is general enough to accommodate various methods and solutions from the literature (e.g., [8], [19], [20], [29], [33], [37], [38]).”
InfluentialAchaal, B., Adda, M., Berger, M., Ibrahim, H., & Awde, A. (2024) · Cybersecurity · doi:10.1186/s42400-023-00200-w · Cited by 172
“Then, the active output power of the generators is adjusted to maintain a dynamic equilibrium between the active output power of the area and the demand (Li et al. 2020).”
BackgroundDistributed Estimation Approach for Tracking a Mobile Target via Formation of UAVs
Doostmohammadian, M., Taghieh, A., & Zarrabi, H. (2021) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2021.3135834 · Cited by 117
“Similar results are also discussed in [53], [54].”
Result
Metadata
- Authors
- Li, D., Gebraeel, N., & Paynabar, K.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Transactions on Automation Science and Engineering
- Published
- 2021-10
- Volume
- 18
- Issue
- 4
- Pages
- 1626-1639
- ISSN
- 1545-5955 (ISSN-L)
- 1558-3783
- OpenAlex
- W3082437751
- Cited by
- 68
- References
- 31
- Citations by year
- 2026: 4 · 2025: 10 · 2024: 17 · 2023: 15 · 2022: 9 · 2021: 11
- FWCI
- 4.58
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Automation Science and Engineering (publishedVersion)
- Funders
- U.S. National Science Foundation (CMMI-1536555)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Smart Grid Security and Resilience
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Computer Science › Computer Networks and Communications › Network Security and Intrusion Detection
- Keywords
- replay attacks, SCADA systems, industrial control systems, cyberattack detection, equipment faults, statistical process monitoring, detection delay, rotating machinery
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Detection and Differentiation of Replay Attack and Equipment Faults in SCADA Systems. https://app.cochat.ai/papers/10.1109/tase.2020.3013760
- The paper
- Li, D., Gebraeel, N., & Paynabar, K. (2021). Detection and Differentiation of Replay Attack and Equipment Faults in SCADA Systems. IEEE Transactions on Automation Science and Engineering. https://doi.org/10.1109/tase.2020.3013760
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.