The DOI matches its Crossref record.
Manufacture of Passive Dynamic Ankle–Foot Orthoses Using Selective Laser Sintering
Abstract
Ankle-foot orthosis (AFO) designs vary in size, shape, and functional characteristics depending on the desired clinical application. Passive Dynamic (PD) Response ankle-foot orthoses (PD-AFOs) constitute a design that seeks to improve walking ability for persons with various neuromuscular disorders by passively (like a spring) providing variable levels of support during the stance phase of gait. Current PD-AFO manufacturing technology is either labor intensive or not well suited for the detailed refinement of PD-AFO bending stiffness characteristics. The primary objective of this study was to explore the feasibility of using a rapid freeform prototyping technique, selective laser sintering (SLS), as a PD-AFO manufacturing process. Feasibility was determined by replicating the shape and functional characteristics of a carbon fiber AFO (CF-AFO). The study showed that a SLS-based framework is ideally suited for this application. A second objective was to determine the optimal SLS material for PD-AFOs to store and release elastic energy; considering minimizing energy dissipation through internal friction is a desired material characteristic. This study compared the mechanical damping of the CF-AFO to PD-AFOs manufactured by SLS using three different materials. Mechanical damping evaluation ranked the materials as Rilsan D80 (best), followed by DuraForm PA and DuraForm GF. In addition, Rilsan D80 was the only SLS material able to withstand large deformations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Patient specific ankle-foot orthoses using rapid prototyping
Mavroidis, C., Ranky, R. G., Sivak, M. L., Patritti, B. L., DiPisa, J., Caddle, A., Gilhooly, K., Govoni, L., Sivak, S., Lancia, M., et al. (2011) · Journal of NeuroEngineering and Rehabilitation · doi:10.1186/1743-0003-8-1 · Cited by 361
Additive manufacturing of custom orthoses and prostheses—A review
Chen, R. K., Jin, Y.-A., Wensman, J., & Shih, A. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.04.002 · Cited by 292
Advances in selective laser sintering of polymers
Han, W., Kong, L., & Xu, M. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac9096 · Cited by 254
Bio-inspired active soft orthotic device for ankle foot pathologies
Park, Y.-L., Chen, B.-R., Young, D., Stirling, L., Wood, R. J., Goldfield, E., & Nagpal, R. (2011) · 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems · doi:10.1109/iros.2011.6094933 · Cited by 130
An exoskeleton using controlled energy storage and release to aid ankle propulsion
Wiggin, M. B., Sawicki, G. S., & Collins, S. H. (2011) · 2011 IEEE International Conference on Rehabilitation Robotics · doi:10.1109/icorr.2011.5975342 · Cited by 110
Metadata
- Authors
- Faustini, M. C., Neptune, R. R., Crawford, R. H., & Stanhope, S. J.
- Venue
- IEEE Transactions on Biomedical Engineering
- Published
- 2008-02
- Volume
- 55
- Issue
- 2
- Pages
- 784-790
- ISSN
- 0018-9294 (ISSN-L)
- OpenAlex
- W2098074145
- Cited by
- 209
- References
- 0
- FWCI
- 4.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.