A high-speed ic random-number source for smartcard microcontrollers
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The design of a high-speed integrated circuit random number source macro-cell, suitable to be integrated in a SmartCard microcontroller, is presented. The direct amplification of a thermal-noise source is exploited and an accurate and low-area offset zeroing system has been developed in order to increase the statistical quality of the output bit sequences. Moreover, an analytical model has been developed, allowing the estimation of the output bit correlation as a function of the main circuit parameters. Using a standard 0.18-/spl mu/m n-well CMOS process, a prototype has been fabricated and measured, obtaining a random behavior for an output data rate up to 40 Mb/s. The macro-cell area, excluding pads, is 0.025 mm/sup 2/ (220 /spl mu/m/spl times/116 /spl mu/m) and its power consumption is about 3.6 mW when clocked at 10 MHz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bucci, M., Germani, L., Luzzi, R., Trifiletti, A., & Varanonuovo, M. (2003) · IEEE Transactions on Computers · doi:10.1109/tc.2003.1190581 · Cited by 403
Self-citationChaos-based random number generators-part I: analysis [cryptography]
Stojanovski, T., & Kocarev, L. (2001) · IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications · doi:10.1109/81.915385 · Cited by 371
Chaos-based random number generators. Part II: practical realization
Stojanovski, T., Pihl, J., & Kocarev, L. (2001) · IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications · doi:10.1109/81.915396 · Cited by 279
Modeling and simulation of oscillator-based random number generators
Petrie, C. S., & Connelly, J. A. (1996) · 1996 IEEE International Symposium on Circuits and Systems (ISCAS) · doi:10.1109/iscas.1996.541967 · Cited by 62 · cited 1×
“Few noise-based RNG designs are reported in literature due to the classified nature of most research works in this field; however, three different techniques for generating random streams have been exploited: direct amplification of a noise source [7], jittered oscillator sampling [8]‐[ 10 ] and discrete-time chaotic…”
Background
Cited by
Threshold Switching of Ag or Cu in Dielectrics: Materials, Mechanism, and Applications
Wang, Z., Rao, M., Midya, R., Joshi, S., Jiang, H., Lin, P., Song, W., Asapu, S., Zhuo, Y., Li, C., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704862 · Cited by 360
True Random Number Generation Via Sampling From Flat Band-Limited Gaussian Processes
Gov, N. C., Mihcak, M. K., & Ergun, S. (2011) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2010.2089561 · Cited by 48
“2089561 Results in the literature are available on this subject such as [7] and [19]–[21], which deal with the autocorrelation function of the generated bit sequence whereas for the aim of this paper we shall present novel results on the per-sample joint entropy”
BackgroundMethodFully Digital Random Bit Generators for Cryptographic Applications
Bucci, M., & Luzzi, R. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916446 · Cited by 46
“Four different techniques for generating random streams are reported in the technical literature: direct amplification of a noise source [5]–[ 7 ], jittered oscillator sampling [8]–[12], discrete-time chaotic maps [13], [14] and metastable circuits [15], [16].”
MethodSelf-citationAn Offset-Compensated Oscillator-Based Random Bit Source for Security Applications
Bock, H., Bucci, M., & Luzzi, R. (2004) · Lecture Notes in Computer Science · doi:10.1007/978-3-540-28632-5_20 · Cited by 37
Self-citationGuler, U., Pusane, A. E., & Dundar, G. (2014) · 2014 International Conference on Information Science, Electronics and Electrical Engineering · doi:10.1109/infoseee.2014.6947786 · Cited by 9
“Therefore, some researchers tried to suppress it [27]; however, most researchers simply ignored it [28]–[30].”
Metadata
- Authors
- Bucci, M., Germani, L., Luzzi, R., Tommasino, P., Trifiletti, A., & Varanonuovo, M.
- Venue
- IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications
- Published
- 2003-11
- Volume
- 50
- Issue
- 11
- Pages
- 1373-1380
- ISSN
- 1057-7122 (ISSN-L)
- OpenAlex
- W1992738104
- Cited by
- 62
- References
- 4
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.